Devanco Canada - Get The Right Garage Door Opener‎ and Parts

GALV-306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 29" Long
For Roadside order part # 2806.177.290

2806.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 29" Long
Roadside
For Curbside order part # 2807.177*290

3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

This is a Whiting original roller

GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

K80-5001

LiftMaster Keyway 3/16 x 3/16 x 1-3/4"

For use with various LiftMaster® Gate Operators and Perimeter Access Solutions

OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

MG00020

Micanan Flat Washer 1-1/16" ID x 1-3/4" OD

TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

Double Angle Rails for doors up to 18'6" high
Includes #41 chain pack

GALV-343-258-144-L

Torsion Spring .343 x 2-5/8" x 12ft LH Galvanized Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-283-258-144-R

Torsion Spring .283 x 2-5/8" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

2376.162.18.960

Whiting Torsion assembly .162 wire size 18" spring length 96" shaft

2100-1622

Linear Jam Nut 1"-14W 5/16 Tap Hole

E/1929/066

Automatic Systems Balance Spring Ass'y 7.0 MM BL229

Used on the BL229 gate op.

2807.156.170

Whiting .156 x 2-3/16 x 17" Curbside with Cones

GHX-6114-M-RH

Manaras Explosion Proof Gear Head 1 HP 120V Monitored Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

1104-16FT-CHI-CRM

Residential Side & Top PVC Weather-Strip with cap 16' Long - CHI Cream (C-C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
CHI compatible colour

CP-ENGAGE-SLIDE

Lynx Engaging Slide CDJ/MDJ

GALV-363-334-L

Cut-to-Length Torsion Spring .363 x 3-3/4" Left Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

GALV-218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Galvanized Yellow/Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GHW-311-1HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1 HP 115V 1P with ECB

With DC2000 logic board
Worm-Gear Jackshaft type Industrial operator NEMA 4/12

10.1001.M6

Whiting C-4 Lock Nut Metric M6-1.0 ** Price by Quote Only

MQ00011

Micanan 3/32" Aluminum Oval Sleeve Sold per Unit

2806.177*270

Whiting Spring Assby .177 x 2-3/16 x 27" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 27" Long
Roadside
For Curbside order part # 2807.177*270

GDI-TLG51

GDI Trolley Kit Add-On Feature

This is an add-on feature to the JDMG operator
Includes: Trolley brackets traveller idlers arms

1104-10FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 10' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K07-8064

LiftMaster Lower Crank BG790

Also known as: G078064 07-8064

236-110

Serco 3/4" Klip Ring ** Price by Quote Only

For Serco loading docks

CRG11136P

Pentagon Crank Gear 11:1 36kg PVC *** Price by Quote Only

2376.177.25.930

Whiting Torsion assembly .177 wire size 25" spring length 93" shaft

4580-304-PEBL/KAKI

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Pebble/Kaki 458-17 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

2705.156_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Roadside order part # 2704.156*180

K1D6686CC

LiftMaster Expansion Board CSL24V

This is a replacement CSL24V Expansion Board
For use with various LiftMaster® Slide and Swing Gate Operators

O02R9000

AirLift Turnbuckle Complete

7176.218.33.96

Whiting Heavy Duty Torsion Assembly .218 x 35" shaft 96"

939C00010

Extension Spring Steel 1 pc Door 8x7 Hook End Special Order

For cantilever 1-pc door

1634-134-W-G/T

Elton Commercial Window for Flush Doors 1-3/4" thick 16x34 White Frame Sealed Glass Grey Tint

Screw together window kit
Thermal window
Frame size: 35-1/8" x 17-1/8"
Cut-out size: 33-7/8" x 15-7/8"
Vision area: 31-3/4" x 13-11/16"
Different glass options and frame colours are available upon request

.......more details

12513

Doorlec Pocket Wheel with 1" Oilite EHJ

O18R1003

AirLift Safety Eye Kit Telco

1104-16FT-CLAYSTN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Claystone CSG

Claystone rigid vinyl retainer with claystone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

ME112-C4

Miller Edge Clima-Guard U-Shaped PVC Mounting Channel Sold by the Foot

SP-LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Special Coded **Must provide FC & Start #

Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
Can be used for larger vehicles with higher cabs as vans various trucks
20-25 foot detection zone
Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed

.......more details

G-10X7-134-W

Thermal Window Clear 10" x 7" for 1-3/4" Garaga Door White

For 1-3/4" thick door

ME123-2M-BLK-RH

Miller Edge Black RH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

E/1929/073

Automatic Systems Round Arm Ass'y 19'-8" (BL229)

Used on the BL229 gate op.

OS-6X6-W-DOOR

Garex Overstock 6'x6' Woodgrain White Complete Door

One woodgrain 4 x 18" panel door brand new.
12" radius 1-3/4".
Floor to ceiling 84"

SS-1-1/4-11

Solid Shaft 1-1/4" Keyed 11'-0" Galvanized ** To Extent of Inventory

Actual length is approx. 11'-0"

XBA4

NICE Indicator Lights for M3/M5BAR 13.1ft

The Apollo XBA4 is a 13.1 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the M3BAR and M5BAR barrier gate openers.

EHJW-383-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 208V-3Ph

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
With DC-2000 controller
Watertight and Dust Tight EEMAC Type 4/12

RDO-321-3/4

Doorlec RDO Rolling Curtain Op. w/ECB 3/4HP 230V 1PH

Additional charge for doors over 14' high

3BXT-RED

Replacement Button/Switch Only - Red

Replacement button for 3BXT

LOTBINIERE-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Lotbiniere design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

GODEFROY-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Godefroy design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

CABLE-NR-14-GALV

Cable No Roll 1/4" 19x7 Galvanized 500ft *** No Longer Available

19X7 rotation-resistant wire rope.

2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.135 wire size

MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

Polyester strap 2" wide
Work load limit 3335 LBS

.234-3.5-11.25-LHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Left Hand

Examples of ends on mini storage springs

CB1805000-KOR

Cable 1/8" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized Cable 1/8" 7x19 5000ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Stainless Steel Cable Specifications

JB-02P-W

Miller Edge Junction Box Nema 4

For use with commercial door operators and CPT sensing edges from Miller Edge
Waterproof
Accommodates wire .181 to .312

Installation instructions

10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

E/1929/071

Automatic Systems Round Arm Ass'y 16'-5" (BL229)

Used on the BL229 gate op.

WLMODULE002

Manaras Univ. Aux Output Module BOARD070

50690

Doorlec Clutch Assembly for ETBH

K76-37667-2

LiftMaster Limit Box Kit

Compatible with model SL585 Slide Gate Operators.

SGP-321-1-230/1

Doorlec Gate Master 1 HP 230V 1 Phase with Heater and Lights in Cabinet

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater included

Technical Information Sheet Fiche Technique Electrical Diagram Diagrammes Electriques

K75-50932

LiftMaster Crank Housing Kit - Hand Crank Not Incl. **DISCONTINUED

SL3000 new style hand crank pocket to store hand crank (crank sold separately)

2376.177_25.900

Whiting Torsion assembly .177 wire size 25" spring length 90" shaft

C-6X48-134-BLK

Thermal Window 6" x 48" for 1-3/4" Door Black

For 1-3/4" thick door

PRO-APTC-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

MG020-B-2E-03

Miller Edge Sensing Edge Black 2-Wire End Outlet 3 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

.262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-GH-7553U-RH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

PRO-HB-7521U-RH

Micanan 3/4HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

.343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-GT-10053-U

Micanan 1HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10021-U

Micanan 1HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10081-U

Micanan 1HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7543-U

Micanan 3/4HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-APT-7583-U

Micanan 3/4HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-APT-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-7581-U

Micanan 3/4HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

60-7248-CBI087

Wheel Chock Safety Pkg incl'd: yellow ductile iron chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CBI-087 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Cast Ductile Iron for Impressive Strength
Painted Yellow for High Visibility
Size: 8-1/4" wide x7-1/4" long x 8-1/2" high

.205-3.5-10-LHW

Mini Storage Spring .205 x 3.5" x 10" long Left Hand

Examples of ends on mini storage springs

LB912-12

Laminated Bumper Standard Black 12" x 12" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-36SF

Steel Faced Laminated Bumper Black 12" x 36" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LLB620-22

Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.
This model has angles on both sides

.......more details

LB412-18

Laminated Bumper Standard Black 12" x 18" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB406-36

Laminated Bumper Standard Black 6" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details