Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CPS3-N4

LiftMaster Option Card with CPS-UN4 Eyes for applications requiring 2 sets of photocells

For applications requiring two sets of photoeyes in a damp location
Range up to 45ft water dust and corrosion proof eyes (Nema 4x rating)
Works with Logic 3 4 5 Commercial Operators
Includes Durable steel brackets - floor or track mounting
Kit Inludes one set of CPS-UN4 and one CPS3 card ( CPSIII )

LYNX-6000-BOARD

Lynx 6000 Commercial Logic Board

Replacement logic board for Lynx commercial operators built from 2002 through 2005
Will not work for the ALDJ Model (Light Duty)

Basic Operation Manual

41D7675

LiftMaster Receiver Logic Board 2.0

Also known as: 45ACT

DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

Activates two devices
Wire lead antenna
12 and 24 Volt models
Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
The receiver can be activated by any of the Delta-3 format transmitters
Mounting bracket supplied

.......more details

Installation Manual

75424

Marantec Universal Receiver / Remote Kit 315 MHz

Universal receiver kit includes one plug-in radio receiver and one M3-2312 remote control transmitter
Universal receiver plugs directly into the wall outlet
Same as part # 73870
Made in Germany

Installation Instructions Programming Instructions

CPS

LiftMaster Commercial Protector System Eyes

Universal commercial photo-eye kit for indoor use
Interface box allows CPS to work with all operators
24 volt AC/DC supply voltage
Mounting hardware included
Sensing distance of 30 feet
Receiving Eye - A: 001D6857-1 Sending Eye - A: 001D6857-2

.......more details

Installation Manual

4690L

LiftMaster Premium Series Heavy-Duty 1-1/4HP DC Motor Ring LED Battery Backup 360 Camera

Chain Drive and DC motor with soft start/stop for quiet operation
HD Quality 360° Camera with night vision
Ring light LED 2000 lumens with motion detection
Two-way communication to the myQ app
Premium battery backup included (485LM)
Comes with: 2 (L993M) 3-button remotes

.......more details

Product Guide 4690L Accessory Compatibility Chart 2025 Comparison Chart 2025

FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
Control Board: model 780D

41014

Doorlec Emergency Release Spring

Attaches to the wall disconnect leverto put the operator in manual mode in case of power failure

DEV-RSFD-7000

Devanco Rolling Steel Fire Door 7000 UL Rated **Made to Order

Model 7000 are manufactured with UL labels of Class A B or C; however their sizes can be customized to an extent with UL oversize certificates.
Model 7000 fire door includes UL labels of 3 1½ and ¾ hours.
The fire door’s heat-sensing technology will allow the doors to close automatically with additional smoke protection available that makes the fire door more reliable than alternative options.
Door sizes can be customized to fit openings that are 43 feet and 6 inches wide by 26 feet tall.
The doors also include viscous-governor technology as well as a 165-degree fusible link.
Pricing varies according to size and options selected.

.......more details

821LMC-S

LiftMaster Smart Garage Control White

Smartphone control: Control secure and monitor your garage door from anywhere.
Universal: Works with all major brands of garage door openers manufactured after 1993.
New design: Compact modern design with a white finish that blends in with ceilings walls and garage doors. New mounting plate simplifies install.
Improved setup: Bluetooth Low Energy (BLE) integration makes setup easier than ever.
Download the myQ® App and follow the in-app instructions to get set up in minutes.

Installation manual Manuel d'installation Product guide Guide de produit

MIC001

Manaras Internet Control Device Modification (Op has to be compatible)

The internet control device allows you to control and monitor your garage door from anywhere using the MIC app and your smart device
Includes the MIC device and Wi-Fi compatible board & software
Must be purchased and used with a Manaras monitored operator

RADIO-EM901

Manaras 1-btn Mini Transmitter 313 MHz

Open/Close mini remote for 1 door
Comes with LED battery life indicator
Mini 12V battery included
Key chain holder included
Replaces RADIO-28
10-dip switches

.......more details

Manual Programming Instructions

FA-NHEX-58-18-J

Lynx Jam Nut 5/8-18 for MCJH

HTR

LiftMaster Heater Kit for DC Pad mount Gate Operators

Heater kit for pad mount DC gate operators.
Includes battery bracket.
Protects system to -40° F and installs on operator frame
works on 120 or 240 VAC.

Installation Manual Manuel d-Installation

Z9207

Sensor Guards Sold as a Pair

Made to fit over garage door sensors
Will fit over most popular sensor brands
Protects sensors from coming out of alignment
Helps protect against water corrosion
Easily installs to the door track or the the wood door frame
Sold by the pair

.......more details

12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

Monitored NEMA 4X enclosure through-beam type photocell
4-Wire
Suited for industrial environments
Range: 45 ft
Supplied with 3ft of wire

Installation Manual

41AC050-1M

LiftMaster Electronic Circuit Board Assembly

Assembly includes: circuit board end panel and light socket
For chain drive units with one light
Fits 3245 & 3255
Also known as 41AC050-1 041AC050-1M

16-5L304

LiftMaster Cogged Vbelt 5L 30.4"

STATION079

3-btn Push-Button Control Station with Key Lock-Out Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.
Schneider Elect. part no. XALD04H7

Connection instructions

4041-LCN

LCN Door Closer *** repl by 4040-XP

HAE00072

Linear WiFi Wall Station

This Wi-Fi wall station allows direct operation of the door operator and light using the buttons.
When connected to your local wireless access point you can check status get notifications open or close the door and manage user access from any location via the Linear Android or iOS app.
Requirements: To use with the app you will need:
a Wi-Fi network with internet connectivity
a strong Wi-Fi signal in the garage where you are installing the wall station
an Android or iOS smartphone or tablet

.......more details

Programming Instructions

PTM-24V

EMX 7 Day Programmable Timer 24V

The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
With up to 16 ON/OFF events per day and 15 different daily options.
Its DIN rail mount design and wide power supply options (12 or 24 Volt) make installation easy.
The battery backup saves stored programs in the case of power loss.
Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.

.......more details

Instruction manual Spec sheet Comparison guide

Z9003-QUIET

Pusher Spring - 27" w/Sleeve 3" Tip Sold as a Pair

Quiet pusher spring 27" long with a large 3" tip and PVC sleeve over tube
11lbs of initial pushing strength per spring+ 3lbs per inch per spring
Sold as a pair. Pair includes 1 LH 226841 and 1 RH 226842

RP-CAP-RSL-64-77

Lynx Capacitor RSL (1/2HP) 64-77 MFD ** repl. by 70-84 MFD

Also used in the 1/3HP openers. Replaces RP-CAP-RSL-53-64

E/BLOP/246

Automatic Systems Option DBK Fan Heater 120V-400W for BL229

36645R

Genie Screw Drive Coupler

This coupler only works on the following models manufactured after June 2011.
TriloG 1200 (3064) TriloG 1500 (4064)
PowerMax 1200 (3062) PowerMax 1500 (4062)
GPower 900 (2564)
Powerlift 900 (2562)

MCJH-12-115-ECB

Lynx MCJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325 ** Replaced by CDJH

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

Formerly 76-G0541 G76G0541
For SW470 with GL or S3 Board SW490 with GL Board

MQ00012

Micanan Adjustable Cable Stopper Gold C/W Set Screw Sold per piece

Used on all Micanan waterproof and corrosion proof units that have brakes as well as all explosion proof units.
Comes with set screw 3/16” x ¼”

PED42

Pedestal Post 42" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look
Same as G559

MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

Makes any garage door operator compatible with MegaCode transmitters
Simple plug-in design
Easy to install - one connection using two-conductor wire
Memory: storage for up to 10 MegaCode transmitters
Normally open contact activates for 0.5 seconds
Power: 110 VAC +/- 10% 60 Hz

.......more details

F539.90000

Bircher Infrared Programming Remote RC Duo 2 Red

Conveniently program all parameters from ground level
Backlighting of specific buttons provide instant confirmation of programmed parameter & value
Configure any Hercules 2 Hercules 2s Reflex 2 or UniScan sensor with the same remote
Multiple address feature allows programming of a single sensor even in close proximity to other sensors
Large highly visible buttons
Automatic off feature conserves battery life

.......more details

Programming Instructions F539.90000 Sell Sheet

41DJ001

LiftMaster Circuit Board with Plate for 3800 3900 41DJ001B

Board: Security+ 315 MHz
For jackshaft models; 3800 3800P 3800PLD & 3900
Also known as 41DB001-2

Programming Instructions Instructions de programmation

22-240

Brake Solenoid 230-240V

Used on all brands of commercial door and gate operators
2 wire connection

RA-LPL-KEYPAD

Lynx Wireless Proline Keyless Entry 303 MHz

Illuminated keypad
Weather shutter protects keypad from elements
1 to 6 digit codes for maximum security
Allows for access without remote or keys
Compatible with Lynx residential openers built from 2000+
Mounting screws and 9V battery included

.......more details

Compatibility chart

VBELT_4L310

Lynx VBelt 4L 31" (4L310)

Fits the old Lynx 455 garage door opener

41DJ002

LiftMaster Circuit Board with Plate for 8500

Board: Security+ 2.0 for DC Jackshaft Model 8500
5 year warranty

31376-2

Doorlec Sprocket 60B65 2" Bore

NINJA-001-BLACK

Rodent Ninja Garage Door Corner Guard Set

Blocks pests from entry
Fills in holes and gaps along garage door frame
Keeps insects mice and unwanted guests outdoors
Kit includes: (1) Right and (1) Left handed Garage Door Corner Guard (6) Self-tapping Screws
Made in the USA

DMB51CM24

Carlo Gavazzi Mini Multifunction Timer

Mini DIN Rail Mount Multi-Function Timer
24VDC and 24-240VAC/DC Supply Voltage
0.1 Seconds to 100 Hours Timing Ranges with Six Sub-Ranges
Diagnostic LEDs
Only 17.5mm wide

BLSI12

Pivin Drapeau Vertical Lift Barrier 1/3HP 120V 1PH 6.57A/5.65A

Specify length of arm required up to 12'
Arms made of 1" x 3" rectangular aluminum
Has a 150W heating element optional 300W is available
Operating temps: -40 degrees C to 50 degrees C
8 seconds opening/closing time
# of cycles: 750000

.......more details

ALUM-525

Aluminum 24" x 100' Spool Black / Noir # 525

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 525
Reverse side is #431 Bright White

Colour chart

D400-144-1

Cable Drum Standard Lift 12' Torque Force Pair

12 ft Standard lift cable drum. Aluminum die cast alloy.
Max. door height: 12'-1".
Rated lift per drum: 375 lbs.
Max. cable diameter: 5/32".
Mounting: 1" tube or solid shaft with 1/4" keyway.
Cross references: DM413 DNS 4-13 OMI 2100.

.......more details

K22-36899

LiftMaster Single Phase Brake Solenoid L5

4-wire connector for single phase
120 volts on terminals 1 & 2 (closest to the plunger)
240 volts on terminals 3 & 4 (farthest from the plunger)

Wiring diagram

41A6388

LiftMaster Split Coupling (41B6299 / 41D8615)

Same as # 41B6299 and 41D8615
Compatible with all Liftmaster 3800 3900 & 8500 Residential and Commercial Jackshaft Operators.
Door shaft collar RJO

41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

Gear and sprocket assembly for belt drive models between 1995-2002

Installation Manual Manuel d'Installation

T1B-DS

Lynx 1-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Use with receiver (RA-LYNX-RCVR) for open/close on commercial operators
Same as model 2211-L (TX)

.......more details

Compatibility chart

R5110

Bearing 1" Commercial

1" inside diameter 2" outside diameter
1" steel bearing allows the shaft to rotate securely on a garage door assembly
Same as part number 235

EP2979

Exhaust Port 3" with latch long barrel

For use on insulated door panels up to 2" thick.
Inside diameter: 3" Includes fasteners & gaskets.
Polished aluminum finish.

BL229-EX1929-G50

Automatic Systems Rising Barrier Gate with 16'5" Round Arm

Orientation of the arm (right or left) must be specified when ordering

RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

Installation manual Spec sheet

CHC-SS-532

Chain Hoist Hand Chain Stainless Steel 5/32" Sold per Foot

Welded chain. Weldless chain is not available in stainless steel

36045A

Genie Helical Gear 2040L

Helical gear assembly for the Genie #2040L garage door opener.
Same as: 36045AS 36045. 36045A 36045S
Includes: Helical and limit gear screws clips and small tube of grease.

BEA-10-FALCN-XL

BEA Falcon-XL Motion Detector Mount under 11'5"

Same features as the Falcon detector but made specifically for extra low mounting
Mounting height between 6.5' and 11.5'
Detection zone: 13'x6.5' at 8 1/5'
Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor.
Sensor also has the ability to differentiate between pedstrians and vehicles.
Available remote makes it easy to make adjustments to all key parameters of the sensor while at ground level.

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

27021

Doorlec Electric Motor TEFC 1/2HP 115/230V DC201

Wiring diagram for 120V Wiring diagram for 230V

LA500DCS

LiftMaster Secondary 24VDC Actuator Arm for Dual Swing Gate Applications New Model

Includes 40ft cable and junction box

Installation Manual Manuel d'installation Sell Sheet

41AB050-2

LiftMaster Electronic Circuit Board Assembly

Assembly includes: Logic board end panel and light sockets
For belt drive models with 2-lights
Also known as 41AB050-2M

1336.8

Whiting Stainless Steel Roadside Top Closure Bracket for 8" radius

4007-16FT

Aluminum Retainer only for Light Brush***Actual Length 16'2" 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

41A5021-9G-315

LiftMaster Circuit Board Assembly

Board: Security+ 315 MHz
Aeesmbly includes: circuit board and end panel
Also includes 1 Multi-Function wall ctrl panel - 2 wire
For ATS2113X model
For older ATS operators use replacement board 41A5021-1ATS

041D0605-5

LiftMaster Electric Motor Kit Only DC

Also known as: 41D475-1 062525 41D605-5 041D0605
DC Motor Replacement Kit.
For use with various LiftMaster® Belt Drive Garage Door Openers; manufactured 2001 to 2005. The unit will feature a red/orange learn button.

7-6087

RW Hanger 021 Hinge Apron Formed Steel 4-3/4" l. x 1-7/8" w

Capacity: 125 lbs
Material: Formed Steel
Finish: Wheels satin coat steel Apron and pendant commercial galvanized
Wheels: 2 1/8" Diameter Formed Steel
Bearings: Cold Rolled Steel Rollers

380UT

LiftMaster Universal 2-btn Transmitter Gen 5

The Universal Remote Control is compatible with most major brands of garage door openers gate operators and commercial door operators
Operates up to two brands of garage door openers eliminating the need of multiple remotes on your vehicle visor.
Universal compatibility allows you to operate two different garage door manufacturers and/or frequencies at the same time
Security+ 2.0®
Compatible with: LiftMaster® Chamberlain® Craftsman® 390MHz 315MHz 310MHz Security+2.0 390 MHz Security+ Rolling Code 315 MHz Security+ Rolling Code 390 MHz Billion Code 390 MHz Dip Switch (7 8 and 9 position)
Genie® 390 MHz Rolling Code (Intellicode) 315 MHz Rolling Code(Intellicode) 390 MHz Dip Switch (9 and 12 position)

.......more details

380UT Manual (EN/FR)

104462

Marantec 7ft Belt Rail 1.2mm Heavy-Duty M13-1207B

1-piece rail

220315

Allstar Challenger Gear & Sprocket with Bushing

K72-12507

LiftMaster Clutch Shaft Kit (3/4 & 1HP)

Clutch Shaft Kit 3/4 & 1 HP Trolley operators
Complete with: Clutch Plate Clutch Shaft Bearing 3/4' I.D. Sprocket 41B10x3/4' 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener

Installation manual

CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

111854.0001

Overhead Logic Board for RSX 1/2 Hp 115/208/230V 1PH *** By quote only

Description: KITPCB1PH1/2HPSX/HXUL10
For RSX ad RHX models 1/2 Hp Single phase operators

Replacement Instructions

17330

Doorlec DC-3100R 3-Channel O/C/S Receiver 301 MHz

Range of approx. 175ft (53.34m)
8 dip-switches for programming
24/120V selectable
Made from polycarbonate plastic for rugged and weatherproof use
Includes a built-in antenna to eliminate interference and provide continuous reception
A plug-in wiring harness is provided to facilitate interconnection between power supply of operator and receiver

.......more details

SOLID_SHAFT_18'

Solid Shaft 1" Keyed 18 ft Galvanized

Actual length is approx. 18'-1"

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red Part # XALD03H7

Open/Close/Stop allows complete control of the door.
Compatible with all commercial door operators.
NEMA 4 4X 12 13
Outdoor surface mount station with polycarbonate enclosure part # XALD03H7

Sell sheet

Z9955

Spring Gauge

Ruler style spring gauge
Stainless steel
Confirms spring ID & wire size
Place formed end between 2 coils count 20 coils to obtain wire size

GTL-PLUS

Devanco Door Lube 454g Aerosol

Ozone Friendly Door Lubricant with anti-wear and extreme pressure additives.
Non-Drip formula provides long lasting lubrication and protection where metal to metal friction occurs. •Ideal for use on door tracks hinges springs rollers chains cables gears and more.
Available for private label
12 cans per case

Safety data sheet Fiche de données de sécurité

BEA-REMOTE

BEA Falcon/LZR Programming Remote

Makes it easy to set up and make adjustments to all key parameters of the Falcon motion detector while at ground level

Programming instructions

RS-40

Roller Shutter Aluminum Model 40 Made to Order Pricing by Quote Only

The RS-40 is designed for use in window roller shutters door recesses and small shopfronts.
These profiles are of better technical performance and are thus more stable.
At the same time good coil diameters allow to use this profile in small-size boxes.
The foam filling ensures good heat and acoustic insulation.
Its low weight allows the use of manual drives spring- or electric control devices.
The RS-40 profile is available with or without perforation in a wide range of RAL-like colours.

.......more details

27026

Doorlec Electric Motor TEFC 1.5 HP 115/230V 1P DC203C

General purpose - Frame 56C
1725 RPM for worm-gear reducer models TEFC type

ZAP-8800

Zap 8800 Series-3 Opener

ncludes: (1) 8825-3-(pulley size TBA) c/w motor head assembly and control box

ATV320U15M2C

Pivin Drapeau Telemecanique Variable Speed Controller 200/240V 1PH 2HP

89493

Marantec RPM Sensor with Wire Harness

For use on M-line/Q-line/EOS models

HDSL24UL

Liftmaster Heavy-Duty Variable Speed Slide Gate Op. 24VDC for Heavy Gates.

1.5 HP Variable Speed Slide Gate operator for gates up to 75' and 3000lbs
Battery backup provides up to 45 cycles or 120 days of standby power
Smooth Start/Stop with variable travel speed of .5ft/sec to 1ft/ second.
120/240 input voltage optional 3 phase converter for 208/240/460/575
On-Board Secutiry+ 2.0® Receiver accepts (50x) 8 series remotes or unlimited 811 remotes.
Includes LMRRUL Monitored Retroreflective Photo Eye with intergral heater

.......more details

HDSL24UL - Installation Manual HDSL24UL Manuel DInstallation Product Guide (EN)Guide du Produit (FR)

.225-2-R-C

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

PS241F

Adjustable Regulated Power Supply with Optional BBU 6-24VDC 1AMP

3 preset voltages: 6 12 and 24 VDC
Full adjustment from 2 to 24 VDC if required
Requires AC transformer for input power (minimum 14 VAC for 12 VDC output 26 VAC for 24 VDC output cannot be connected directly to 120 VAC)
Maximum 1 amp. Output at 70 deg. F and free air
Ripple: Minimum load: 0.007vrms Half load: 0.028vrms Maximum load: 0.057vrms
Regulation: 97.5%

.......more details

Wiring Diagram Diagramme de raccordement Spec Sheet Spécifications

RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

Wireless for easy installation anywhere
Controls door open-close light on-off
Programmable pet opening (Opens to a pre-selected height of 6"-30")
Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
10-second closing safety delay
Transmitter program button

.......more details

Programming Instructions Compatibility chart

8FT-RAIL-BELT

LiftMaster 8' Belt Drive rail 2778BD - colour code: White

Price reflects cost if purchased with an opener

344866

Exterior Curtain Lock for DS-75 Mini Roll-Up Door

MOTOR383

Manaras Electric Motor 2 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

SGO-311-1/2HP

Doorlec Slide Gate Op. 1/2HP 120V w/500w Heater

Engineered to accommodate heavy duty hight frequency commercial and industrial sliding gates with cantilever overhead or roller V track application
It is enclosed in a heavy steel base with 500 Watt thermostatically controlled heater and lockable cover
Three button control O/C/S
Adjustable clutch
Solenoid brake
Universal mount. Left or Right side

.......more details

02-103LGO-1

Push Button Station 3-btn Surface Mount O/C/S Nema 1 For LGO Ops only

PBS-3R
Open-Close-Stop
Works with Liftmaster LGO commercial operator
Also known as: 02-103LGO1 02103LGO1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
Normally Open contact on Stop therefore it won’t work on any other LiftMaster operator besides the LGO. The 02-103 will work on all operators.

.......more details

K71-D1PH

LiftMaster Drum Brake Kit 1 Ph 115/230V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable (120V Single Phase) Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 559
Reverse side is #431 Bright White

Colour chart

41A5021-1M-315

LiftMaster Receiver Logic Board with Purple Learn Button *** Discontinued

For LiftMaster models: 1345 1346 1355 and 1356
For Chamberlain models: CG40D & CG42D
Replaces Reciever Logic Boards: 41A5021-1H-315 41A5021-4M-315 41A6135-1A 41A6148-1 and 41A6148-1A

SGP-353-2-575/3

Doorlec Gate Master 2 HP 575V/3P with TEFC Motor

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater included

16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

Double Angle Rails for doors up to 16' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 18' 11"

MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

1/2 HP 120 volt 1 phase medium-duty logic trolley operator
Medium-duty logic board with integral 315 MHz radio receiver
CPSU commercial photoeyes included
4L V-Belt #48 drive chain adjustable friction clutch
Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
2 year warranty

.......more details