Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-HHD-5011E-L

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft NM ECB No Eyes Left Hand

1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation
Enough Hoist hand chain included for 16’ high standard sectional door
Sealed ball bearings on the output and intermediate shafts roller bearings on clutch shaft
Solenoid Actuated Brake drum brake for quiet reliable braking
Door speed approx. 8-9”/second but can be adjusted by changing the included 18 tooth sprocket
2 Year warranty
Shipping weight 110lbs

Installation manual Specification sheet

MGH-6536-CONT-R

Manaras 2 HP 600V 3P Jackshaft Contactor Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation manual Sell sheet

TRACK-2"-RAW-13

Raw Vertical Track 2" 13'-0" Sold per Piece

MA024RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 12 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe

Additional arm accessories

41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

A one piece travel module replacement kit.
Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
Same as 041D7742-5

503267

PEEK Vehicle Loop Detector 24V with Harness Nema 1 ** Discontinued

Enclosed requires separate 24VAC power.
Wiring harness with plug for detector included.
OPEN only (all LiftMaster operators) or SAFETY/HOLD OPEN only (operators with type B2 T TS or T1 control wiring) when vehicle passes over loop wire
Requires a loop of wire embedded in the ground to connect to the detector.
Requires 2-wire output connection to door operator and 24VAC power
Also known as: G50625S24

.......more details

PRO-TB-7553-U

Micanan 3/4HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks
Full function Smart 10.0 logic control board featuring on-board receiver
#41 roller chain drive
Solenoid brake standard
External radio control strip
Three button O/C/S control station Nema-1 included

.......more details

SD751L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

Q089

LiftMaster Trolley Body Assembly Kit K75-50147

For Liftmaster trolley operator HCT
Kit includes: trolley body cover trolley wheel shaft installation screws ring clip plastic plugs and lock with keys set

BOARD075M

Manaras Replacement Board Kit (Monitoring)

Includes BOARD70MR and BOARD66R
On-board 390MHz radio receiver accepts 50 remote controls

28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

Kit includes part # 28018A and # 28019A
Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
Includes 1 Belt Bullet and 2 Retainers

GRC390/315-3

Heddolf Genie Compatible 390 or 315 MHz 3-btn Transmitter

390 or 315 MHz rolling code compatible 3-Button 3-Channel remote transmitter
Works with Genie and Overhead Door openers that utilize a ROLLING CODE 315 or 390 MHz
Compatible with Genie model GIC-3 GIT90-3 GIT-3 GIT-3BL G2T-3 G2T-3BL GICT390-3BL ACSGT ACSCTG Type 1 ACSGT Type 1 TBSTG Type 1 Series II Electronics Compatible Remote and B8QACSC

38072020

Tie Down Chain Assembly GR 70 5/16" x 20' Hook / Hook

Boron manganese steel heat treated chain
Hook on both ends
WLL LBS : 4700

MT-2B

Linear 2-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery

.......more details

OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

Power LED

LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

BL-14

Barlock Kit Complete for 14ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (85-1/2")

Assembly Manual

COAX-5-RG6

Coax Cable Assembly 5 ft

Assembly includes union

38476R

Genie Master Belt Drive Rail Extension Kit for 8ft Doors

The Genie Master Belt Drive Extension Kit is an extension for C-channel and T-type rails to be used in addition to the 7 ft. (3-piece) rail to accommodate an 8 ft. high door.
The extension kit is designed specifically for Genie belt drive openers.
Belt and instructions included
Compatible Genie SilentMax 1200 SilentMax 1000 QuietLift 800 and BeltLift

60-7238

Wheel Chock Tie Back Chain 15 ft Long 3/16" Galvanized w/ Quick Links

One tie back chain only

OTBH-6233-1-CON

Manaras Trolley Operator 3/4 HP 208V 3 Ph Contactor Model

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation manual Sell sheet

SF375-DUPLEX

Spring Fitting 3-3/4" Stationary Side Only for Duplexing (Short Ear). *** Not Sold As A Pair

To make duplex assemblies you require one pair of SF600 (W & S) and only two SF375-DUPLEX stationary plugs only no need for P375 winding plugs

ALUM-429

Aluminum 24" x 100' Spool Ice / Glacier White # 429

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 429

Colour chart

2594

Whiting Bearing Retainer

XT2563-CUT

Xcluder Rodent Block 3" Black Sold per Foot

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

71-MLSBC

LiftMaster Single Button Control Mod. Field Kit Mod. Logic

Field service mod. for adding single button feature to medium duty logic operators

C20-SR

Bearing Retainer for 1-1/4" (PFL6Z)

Same as PFL6Z. Bearing flangette only.
1-1/4" press fit

K74-30754

LiftMaster Battery Harness 1 unit only

For LA400
2 harnesses required per operator- 1 for each battery

19-48ML-NP

Master Link #48 Nickel Plated

For #48 chain

1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

200ft spool of vinyl insert.
Dual fin

Q400E-HCT

LiftMaster Control Board HCT

Replaced Q400D-HCT

MH00008

Micanan Collar 3/4" ID

2 required per door

S142BRNN924

Carlo Gavazzi Amplifier 24V

Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
11-pin circular plug for easy connection.
8A SPDT relay output NPN/ PNP transistor output or alarm output.
Diagnostics for sensor test during operation.
Alignment help via LED or alternation of alarm output.
Level indication for dirt accumulation.

.......more details

41A2770-17

LiftMaster Hardware Kit for 8550 8160W

Universal Hardware bag for LiftMaster 8550 8160W Operator.

K20-1050B2LPH24

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 5

Standard 1/2 hp motor for new L5 operators

ZT36640159

Rolling Steel Door Model 702 Firestar No 2 Slat 22-Ga

OPH-6532-CONT-R

Manaras Opera-H 1/2HP 600V 3Ph Contactor Model Right Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

Installation Manual Sell Sheet

.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

25-01434

Truck Door Stainless Cables 110" 1/4 nylon eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Nylon eye ends are used 1/4" and 7/16" eye cables
Cross Ref: W4020-1

DC2000SL

LiftMaster Power Backup *** Discontinued

Keeps traffic moving during a power outage
Opens the gate when power goes out to allow vehicles to enter or exit
When power is restored the gate will return to normal operation
Compatible with operators: SL3000UL

MALEDCW

LiftMaster Counterweight for 17ft LED Arm

For use with MALED17 17 ft. LED Arm for MA/MAT

15-19478

LiftMaster Sprocket Assembly

For model H (2005-present)
48B32T with hub

RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

7001-WG-10-MO

Residential Wood Grain Side & Top W/S Medium Oak 10' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

2'6X6SC50

Devanco Loop 2'6" x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

9150000623

3/16" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

MA028

LiftMaster Padded Barrier Arm Yellow 14ft

For use on Mega-Arm gate operator
Requires adapter collars model MA031 - sold separately

Additional arm accessories

MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

25-2006

LiftMaster 6 Amp Overload Fuse

For models: SL585-50-21 SL858-50-81 SL595-50-21 SL595-50-81 SL575-50-21 SL575-50-81

EL1-SS

LiftMaster Telephone Entry System Stainless ** NLA

A Telephone Intercom and Access Control System which provides wired telephone intercom communication and secure access control at the gate or door.
Connects directly to the existing residential home phone line so no additional monthly expenses are incurred.
Stainless steel faceplate with black powder coated housing is attractive and tough.
200 (4-digit) unique programmable entry codes provide convenient assigned access.
Optional power supply transformer not included: K002B0821-1

Programming Instructions Instructions de programmation Sell Sheet

17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

Co-extruded using rigid PVC backing with flexible PVC seal.
To be used with the offset U-channel retainer only (26-40037 or 26-40039)

MA117

LiftMaster Counterweight for Arms 15ft & Up

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

Secondary Arm Only for LA400
All new arms are backwards compatible with the previous model but the LiftMaster branding is different

Installation Manual Manuel d'Installation Sell Sheet

IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 30 feet (model dependent)
Time Saving Installation

.......more details

Installation Manual Sell Sheet

OSH-6112-ECB-LH

Manaras Opera-SH 1/2HP 120V 1Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

K72-33872-1

LiftMaster Limit Switch Shaft Kit

For models MT BMT MJ MH and MHS logic control
Kit includes: limit shaft limit nuts limit bearings limit sprocket washers compression ring roll pin and e-ring

WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

Wireless access control keypad
Same features as WKP250LM3
5 code capacity - 4-digit codes
2-way design with confirmation beep
900MHz

Programming Instructions

PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

14JW

Rolling Steel 3" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

14FW

Rolling Steel 3" Filler Endlock for Continuous

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

SLT4-18P

Rolling Steel 3" Crowned Slat 18-ga Primed

PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

Wand only
Requires CS101 (Carsense-101)

CH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification
Brake not included
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

.331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair *** To Extent of Inventory

Brackets are predrilled
Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
Made of metal
Sold as a pair
9" x 3" L-Shaped

BK308

Jamb bracket J-08 #8 12 gauge

Sold by the piece
Height 4.00" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

MODKIT074

Manaras Hand Crank Field Modification Kit

For in-field upgrade on OGH and MGH operators

Installation Manual

201-300-401-01

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz New Generation

Open/Close/Stop remote for 8 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Year 2016 +

Programming Instructions Instructions de programmation

MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

T103L5

LiftMaster 1 HP 208/230/460V 3P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

PPK3

LiftMaster Passport 3-Button Mini Remote Control with Sec+ 2.0 Technology ** To extent of Inventory

Programming Instructions Instructions de programmation Sell Sheet

VBELT_4L355

Doorlec VBelt 4L 35.5" *** NLA

Same as part number 19045

Z9200

Cable Snubbers Sold as a Pair

Prevents slack from forming in cables
Sold in pairs

Installation Instructions

20386R

Genie Sequencer Board AC Screw Drive

For Genie Screw Drive garage door opener models: PRO95 CM8600 CM7600 Series II ISL950A IS550
Replaces part number 31184R

773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

19-5114

LiftMaster Trolley Chain Pack #41 for 14ft Door

For 3/4 & 1 HP trolley operators

735

Fasteners Flat Washer 3/8" USS Zinc 1000/Box

ID: 0.40625’’
OD: 0.8125’’
THK: 0.066’’

MTAW22B-R

Miller Edge MT22 Air Wave Black Right Hand Sold by the Foot

Installation Manual Sell Sheet

97798

Marantec 2 Piece Logic Board with Terminal Strip for EOS Models

For use on Easy Operating System (EOS) units 4500E 4700E and M50.
Includes the terminal strip for direct replacement of boards that had a power surge or burned out.
The marantec old model number was 78914 it is now 97798.

Programming Instructions

MD00017

Micanan Drive Sprocket 50B23 x 1" Bore 1/4" KW

BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

PRO-HB-7511R-LH

Micanan 3/4HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Includes solenoid brake
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

7/16" head

774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

5/16" bolt has 1/2" head
Max torque = 12
Full thread
Grade 2/Grade 5 depending on availability

AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
Battery is included # CR2032

Installation Manual Sell Sheet

K72-12506

LiftMaster Clutch Shaft Kit (1/3 & 1/2HP)

For 1/3 and 1/2 HP models - L5

OSH-6113-CONT

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

H501L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Left Hand *** No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details