Devanco Canada - Get The Right Garage Door Opener‎ and Parts

LD7LP

LiftMaster 10-30VAC/DC Low Power Loop Detector ( 50-DSP7LP )

10-30 VAC/DC low power fail-safe loop detector
<2mA stand-by current draw
Compact design - ideal for linear actuator control boxes
Automatic sensitivity and frequency adjustments
Ideal for solar or battery powered gate applications

AIRSWITCH009

Exterior Mosley Air Switch SPDT Plastic Housing *** No Longer Available

EL1-SS

LiftMaster Telephone Entry System Stainless *** No Longer Available

A Telephone Intercom and Access Control System which provides wired telephone intercom communication and secure access control at the gate or door.
Connects directly to the existing residential home phone line so no additional monthly expenses are incurred.
Stainless steel faceplate with black powder coated housing is attractive and tough.
200 (4-digit) unique programmable entry codes provide convenient assigned access.
Optional power supply transformer not included: K002B0821-1

Programming Instructions Instructions de programmation Sell Sheet

CONTACTOR043

Manaras Reversing Contactor Allen Bradley 16A-24VAC

AB #100-C16*10

IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 30 feet (model dependent)
Time Saving Installation

.......more details

Installation Manual Sell Sheet

K75-51048

LiftMaster Cover with Crank Housing for SL3000 **DISCONTINUED

HD polyethylene cover

PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

Emitter only. If receiver is required order PD180CBT30Q
For Industrial doors and Gates
Range: 30M
Relay output
Supply voltage emitter: 2 x 3.6VDC lithium batteries
Dimensions: 180m x 51 x 49m

.......more details

Installation Manual

K72-12493

LiftMaster Limit Switch Kit

Complete kit with limit nut retainer switch plates backup plate depress plate limit switches (3) standoffs screws and locknuts
For logic control MT BMT MJ MH MHS

71-10345

LiftMaster RPM Sensor Board (MT only)

4JW-RIGHT

Rolling Steel 3" Curved Cast Windlock 273004 RH

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

2JW-D064

Rolling Steel 2" Curved Cast Windlock *** NLA

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

AC9

Felco C9 Cable Cutter 1/4" Capacity

Tool length: 13"
Gives a clean cut without crushing thanks to the triangular cutting system.
Blades and centre bolt in high-quality hardened steel for exceptional performance.
Thumb catch designed for one-handed operation.
Pressed steel handles with non-slip grips
Maximum cutting diameter: 9mm / 0.35in

.......more details

Data sheet

SLT17-22

Rolling Steel 2" Flat Slat 22-ga Galvanized

UN201

LiftMaster Thermostat Controlled 500-Watt Heater & fan for MAT Gate Operators and more

For temperatures below 32 F
Designed for use with Mega Arm Tower gate operator
Can be used for other applications as required
Heater operates when termperatures are below freezing
Plugs into a standard 120V outlet
500 Watts with a circulating fan

.......more details

Installation Manual

GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

Universal spring anchor brackets - Residential/Commercial
Centerline adjustment: 3-5/16" to 6-3/4"
Bright zinc plated 8 gauge steel
No bearing
Bearing R5110 sold separately

RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles

9723S19

Whiting Pull Strap 19" with Stainless Steel Buckle

.331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

2200-030

Linear Limit Nut

Used on various Linear Gate operators

SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

801-300-001-01

Equinoxe Long Range Receiver 1-Door 433 MHz New Generation

1000 ft range
2016 +
This receiver will accept 8 equinoxe O/C/S remotes

Programming Instructions Instructions de programmation

801-300-002-01

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz New Generation

1000 ft range
2016+
This receiver will accept 8 Equinoxe O/C/S remotes
Nema 4

Programming Instructions Instructions de programmation

CARRIAGE006

Manaras Trolley Carriage Aluminum Die Cast

CBB332

Stop & Sleeve 3/32" 100 pair

Includes 100 stops and 100 oval sleeves

SHAFT017

Manaras Spacer for Trolley Tracks

PPWR

LiftMaster Passport Receiver with Sec+ 2.0 Technology

LCD Menu Screen streamlines programming for easy set-up of facility codes and bit format.
Compatible with all Standard Wiegand Protocols providing control for the security and access of your property.
IP44 Rated Housing designed for outdoor environments.
Designed for outdoor environments
Can be programmed with 1- and 3-Button remote controls offering a variety of solutions to fit your specific application needs

Installation Manual Manuel d'Installation Sell Sheet

10-30701M

LiftMaster Chain Guide Tray for SL595

The tray located between the 2 chain guides.
Chain guides are not included.

35616R

Genie Dual Frequancy Intellicode Receiver Board

For models: PCG500ML PCG700ML GCG350ML 2020L
Works on 315Mhz and 390Mhz

LEVER065

Manaras Brake Lever

BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

T501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Commercial Trolley Operator ***NLA

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

H505L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

230/460V PRIMARY 24V SECONDARY 20VA

DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *** No Longer Available

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 312 MHz

.......more details

Programming Instructions

MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

Self-Contained Keypad System for Door and Gated Entrances
500 Code capacity
Grained stainless steel Surface Mount
Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
Same as SN7000255
Sentex Keypad

.......more details

Installation Instructions Programming Instructions Sell sheet

1005-2-12'

Aluminum Bottom Retainer U-Shaped 12' Long***Actual Length 12'2"***

For door thickness 2"

MD-00007

Sprocket 41B12 1" Bore 1/4" Keyway 2 SS 5/16"

510.5377.00

Whiting Side Seal Option for Dry Freight Door

A extra option when ordering a Dry Freight door
When purchased alone use part number 5377.115

510.1000.00

Whiting Premium Topcoat Paint Option White

Option for Dry Freight Doors

65853

Marantec Programming Wire - Old ML to New M3

Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.

25-10301

Truck Door Heavy-Duty Cable Anchor Bracket Black for Whiting Roll-Up Doors

Steel construction
Allows proper rotation of cable head
Cross ref: Whiting 5803

28-32085

Truck Door 2" Vertical Track with Holes 95.00" Long for Whiting Roll-Up Doors *** To extent of inventory

Galvanized steel 14-gauge construction
Tabbed at both ends for proper alignment at track joints and to allow universal fit for both left hand and right hand frame sides.
Holes drilled to allow for faster plug weld installation to frame
For use with 2" diameter steel or nylon rollers

G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

Heater used in BG type gate operators

Installation Manual

25605R

Genie Inner Slide Kit for Chain Drive Models

The innerslide attaches to the chain and connects the carriage to the chain
Works on the following Genie and Overhead Door models:
IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
SP99 – SP SERIES LD100-500-100A-550A LAD125-555
CM6000-6000A-60-70-80-60S
OHD-696 696CD + Others

.......more details

71-90503000

LiftMaster Non-Resettable Counter Field Kit

A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
This corresponds to the number of complete door cycles of use.

Installation Manual

27096A

Genie Drive Gear *** No Longer Available

Gear for Genie Chain Glide PMX Series and PCG Series
3-1/2 inch diameter nylon gear with square center hole
Square center hole is 7/16"

T-833-C-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025-311 MHz****NLA

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

Makes any garage door operator compatible with MegaCode transmitters
Simple plug-in design
Easy to install - one connection using two-conductor wire
Memory: storage for up to 10 MegaCode transmitters
Normally open contact activates for 0.5 seconds
Power: 110 VAC +/- 10% 60 Hz

.......more details

85LMC

LiftMaster Plug-In Power Supply

Plug-in jack for easy installation on Liftmaster receivers
Power input level: 105-135AC 24AC output

883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

Controls garage door operation and opener lights
Easy and fast programming
Compatible with Security+ 2.0 and MyQ remotes and accessories

Installation Manual Manuel d'Installation

.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-2-L

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GK-BX

Genie Dual Frequency Wireless Keypad 37224R *** To Extent of Inventory

Temporary PIN codes to allow for one time special access needs
Able to operate up to three Genie Intellicode garage door openers
Auto-seek dual frequency technology automatically transmits in both 315 and 390 MHz
Compatible with Intellicode 1 and Code Dodger series

Programming Instructions

1091303602

Overhead 2-btn Transmitter 360 MHz model: 111663-3602 *** No Longer Available

OVERHEAD DOOR remote control transmitter 109130-3602 works with 9 dip switch on 360 frequency.
Part number has changed to 111663-3602

Programming Instructions

K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

.243_2"-LH

Torsion Spring .243 x 2" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 2"
Length: 12 ft

813LM

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0 ** To extent of inventory

Encrypted DIP style three-button remote control with Security+2.0 technology
Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
Easy to code 12-position DIP switch offers up to 4096 codes
May also be programmed for Open/Close/Stop functionality
Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
Compatible only with Security+ 2.0™ commercial receivers and operators

.......more details

Programming Instructions Instructions de programmation Sell Sheet

03-8024-K

Reversing Contactor 3-Pole

Reversing contactor with 24 VOLT coil
Dimensions: 3.5" long x 2.25" wide x 2.25" high
Telemecanique part # LC 2K09 107B7

41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

Gear and sprocket assembly for belt drive models between 1995-2002

Installation Manual Manuel d'Installation

41A5021-I

LiftMaster Electronic Circuit Board Assembly ** Discontinued. No Stock Left

Assembly includes: Logic board end panel and light socket
For chain drive models with 2-lights
Fits 1265 Security + 390MHz
Also known as; 41A5021 41A5021-B 41A5021-C 41A5021-D 41A5021-E 41A5021-F 41A5021-G 41A5021-H

.393_6"-RH

Torsion Spring .393 x 6" x 12ft RH Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft

25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

Steel construction Black E-coat finish
Consist of roller clamp wear plate stud plate and 5/16" lock nuts
Stainless steel studs and nuts
Cross ref: 5600

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) *** No Longer Available

Proline / Lynx 455 Plus trolley slide assembly
For operators built from 2000 +

CP-SW-HOIST

Lynx Interlock Switch

SEA433

Erone Tuned Antenna 433MHz

Increase reception and/or range
11.5ft (3.5m) coaxial cable (RG 58) included
L-Shaped bracket for wall-mounting

Wireless System Chart

VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

Used on MTH MTBH MSL models
Type B
Inside length 32 inches

BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

Replaces BRAKEPART017 SHOE008
To use on brake drums with edges (DRUM004)
New part number is BRAKEPART019KIT

Installation Manual

DISCONNECT001

Manaras Floor Level Disconnect Lever

DOORARM001

Manaras Door Lifting Arm Assembly

Complete door arm assembly for all Manaras trolley operators.

RADIO-27

Manaras MT-1000 1-btn transmitter 313 MHz ** Replaced by RADIO-EM901 or RADIO-EM903

Open/Close remote for 1 door
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
Alternate part number: MN-100TI-A

Programming Instructions

STATION078

Manaras 3-btn Push-Button Control Station Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.

Sell sheet

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz *** No Longer Available

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates one device
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

HAE00040

Linear Control Logic/Receiver Board

Replaces HAE00039
Control board for LSO LDO LCO models

15.1

Whiting Truck Door Stainless Steel Center Hinge

200BL

2" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1703

4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

200ft spool of vinyl insert.

1019-1-3/8-8'

Rigid Vinyl Bottom Retainer Flat 8' Long

Black - for door thickness of 1-3/8"

1015-1-3/4-12'

Rigid Vinyl Bottom Retainer Raised Centre 12' Long

Black - for door thickness of 1-3/4"

1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

For 2" thick doors.

1003-1-3/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

RP-3002

Rubber Plug 1/2"

To plug end of 3002 gum hose

18-RWB-PAIR

Winding Bars Round 18" Set of 2

Cold rolled hardened steel.
Machined to 7/16" at one end with 1/2" outside dia. on the other.
Sold as a pair.

28-32071

Truck Door 2" Horizontal Track with 8" Radius 107" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

Black nylon drum with bearing
Cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines Left or Right drum (Left = Red)
Cross Reference: 2547

26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

Allows for easy door operation.
Seal protects cargo area from dirt and moisture
Will not bunch up as bottom panel goes around top curve.
Co-extruded using rigid PVC backing with flexible PVC seal against the door.
For use with right angle vertical track
Fits only right angle vertical track assembly.

.......more details

Z9997

Hand Chain 25' for Manual Chain Hoists

Not SAE rated.
Designed for approx. 35 lbs

Z9004

Shaft Key Bent 3" x 1/4"

3" Bent Key
Zinc Plated Steel

H11G10

Hinge #10 x 11 gauge

11 gauge # 10 hinge - 0.92 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G04

Hinge #4 x 11 gauge

11 gauge # 4 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

6X12PO50

Devanco Loop 6' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep