Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Hinges
2704.171_250

Whiting Roadside Torsion Spring 2-3/16" ID 25" Long

  • Torsion spring wire only
  • .171 wire size
71-B575

LiftMaster Interior Mount Brake Assembly 575V

Instruction Manual
B014

Rolling Steel 2" Flat Bar 5/16" Sold per Foot

34538R

Genie Up Limit Switch Assembly 66" Wire

  • For up direction on a ChainGlide System using magnetic limits
  • For models: 350ML 500ML 700ML 800ML and other ML Series ChainGlide door openers
  • Also for Overhead Door Python ChainGlide garage door openers
  • 66" inches of wire attatched
31117

Doorlec Sprocket 41B12-1" Bore. KW/SS

SF514-S

Spring Fitting 5-1/4" Stationary Side Only for 1" & 1-1/4" shaft

  • Can be used with either 1" or 1-1/4" winding cones
  • Includes: (1) stationary side only.
  • 2 x 3/8-16 thread holes at CC=4.25"
RA41-1

Aluminum Rail 41 ft

109B33

LiftMaster Trolley Belt Clip

CP-NCAM

Lynx Limit Cam 5/8-24 Travelling

  • Limit cam / limit nut
LB412-14SF

Steel Faced Laminated Bumper Black 12" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
PRO-LH-5021U-RH

Micanan 1/2HP 230V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (PRO LHE)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1005-1-3/8-14

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-3/8"
OHJ-6114-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 120V 1 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
LRS-FP-50

EMX Sensor Flat Pack 50ft Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes sensor and 50 ft of lead wire
    • .......more details
7001-12-CHARCOL

Commercial Side & Top Weather-Strip 12' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
RESET003

Manaras Resettable Overload Fuse 6A 1 Phase

27-20306

Truck Door Balancer Bracket Clamp for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Clamp includes nuts
  • Cross Reference: W #2526 for both #2376 & #7176 balancers
706111011

Rolling Steel 800 Series Guide Channel Sold per Foot

  • Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.
CABLE012

Manaras Brake Cable 7x7 1/16 x 16" w/Stop

  • Comes with cable stop on one end
SL585501UL

LiftMaster Industrial Slide Gate Op. 1/2 HP 115/230/208 Volt 1 Ph Heater NOT Incl.

  • Features a heavy- duty industrial lockable metal cover
  • MyQ® Technology enables you to securely control and monitor your gate operator from anywhere
  • Homelink® Compatible (version 4.0 and higher)
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
  • Manual Disconnect when unlocked allows gate to be operated manually.
  • Quick Close and Anti-tailgate quickly secure property preventing unauthorized access
    • .......more details
378LMC

LiftMaster Wireless Control Panel

  • Wireless control panel for 315 MHz Chamberlain openers
  • For use as a secondary wall control panel only
  • Mounting hardware and batteries included (CR2032)
  • Auxiliary button to open/close 2nd garage door
Programming InstructionsInstructions de programmation
K72-12507

LiftMaster Clutch Shaft Kit (3/4 & 1HP)

  • Clutch Shaft Kit 3/4 & 1 HP Trolley operators
  • Complete with: Clutch Plate Clutch Shaft Bearing 3/4' I.D. Sprocket 41B10x3/4' 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
Installation manual
635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters
Programming instructionsInstructions de programmation
19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

  • Chain pack only
CPT215-PER-FOOT

Miller Edge Field Configurable Sensing Edge Cut-to-Length

  • For do-it-yourself edges on sectional or rolling doors.
  • Black extrusion flexible PVC conductive polymer Ends: Molded polymer
  • End plugs and mounting channel sold separately.
  • Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
  • When combined with the ME123 mounting channel ideal for 2" thick surfaces
  • Minimum Length: 3ft
    • .......more details
7001-14-CREAM

Commercial Side & Top Weather-Strip 14' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
T116

Manaras Trolley Track 16ft for 3/4HP & All APT models up-charge *Actual length 222"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
CP-SH-58-1038

Lynx Complete Limit Shaft Assembly for MCJH

  • 5/8" x 10-3/8"
  • Same kit used for HDC except the HDC has 1 extra 5/8" space washer
32-34792

LiftMaster Gear Reducer Nema 56C 30:1

  • Compatible with LiftMaster® Model SL585 Slide Gate Operators
  • Same as K32-34792
950-188

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Left Hand

  • Original Richards-Wilcox part
OPH-6212-ECB

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
785105

FAAC XP30 Photocells 30m Range Relay 785163

  • Hardwired pair of Photocell relays
  • 30m Range
  • IP54
  • 24v
  • Dimensions: 55 L x 78 H x21 D mm
M18

LiftMaster Remote Control Tester ** NLA

CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

  • Same as #2-30-1
SF258

Spring Fitting 2-5/8" Pair

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .3310".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
  • Winding bar hole 1/2"
    • .......more details
UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
EL2000SS

LiftMaster Telephone Entry Access Control System Stainless Steel ***NLA

  • A high-capacity telephone entry access control system designed to complement virtually any gated community.
  • It is flexible enough to be used in apartment buildings condo complexes office parks and commercial sites.
  • features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line making it a great choice for multi-tenant installations
  • Entry Codes allow for 2000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes 1000 card codes 500 entry codes for example •Transaction Monitoring stores a maximum of 8000 transactions including date time identification and transaction type.
  • Activity Reporting gives property managers the ability to print database system and history reports.
  • Call Forwarding and Do Not Disturb schedules can be programmed for every resident.
    • .......more details
Installation ManualProgramming InstructionsInstructions de programmationSell Sheet
7119405

FAAC 400 Plug for End Cap

GIDFX3.S

Genie 3-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX3.S GIDFX3.S
029-98105

T-Style Replacement Door White Stainless Steel Package 029-98105

  • Replacement door size between 72"- 98" wide x 100.25-105" high
  • Painted white
  • Stainless steel package
  • Includes Hinges Rollers and Cable
SMF5005

Adjust Holdown Assembly With Internal Float ** Price by Quote

  • Ratchet Bar Not Included
  • A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
  • If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
  • This prevents the dock leveler ramp from being damaged.
  • For Serco mechanical dock levelers
MV-00028

Micanan 24V Commercial Receiver NEMA-4 CR32E-24V

41D794

LiftMaster Replacement Motor with Positioning Sensor

  • Electric motor for model 3850
Installation ManualManuel d'Installation
7001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black (B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
MX00037-120V

Micanan Brake Assembly for PRO-J/H 120V Solenoid included

EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

  • 6" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
26CW94525-CUT

Truck Door Intermediate Panel (15" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
Installation manualSell sheet
27-20308

Truck Door Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2523 for #2376 balancer
.331-3-3/4-RH-C

Torsion Spring .331 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 3-3/4" Length: 12 ft
K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

  • For use with LiftMaster LA500 Series swing gate operators
  • Includes ID resistor kit
  • Includes LA500 product ID
276554

Overhead Door Ribbed Air Tubing 1" Sold by the Foot

  • Rubber tubing
CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
SOLID_SHAFT_14'

Solid Shaft 1" Keyed 14 ft Galvanized

  • Actual length is approx. 14'-1"
.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

H12G06-SS

Hinge #6 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
CP-SH-34-16-1212

Lynx Complete Clutch Shaft Assembly for CDJH

  • 3/4" -16 x 12.50"
25E10051

Truck Door Center Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #15 T #70159
  • Box quantity: 50
9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 17' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation manualManuel d'installationSell sheet
SSZP-24-114

Solid Shaft 1-1/4" Keyed Zinc Plated 24'

17K

Rolling Steel 2" Flat Continuous Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
342.115

Whiting Intermediate Panel Tongue & Groove 11-1/2" x 96" Price on Request

  • Standard size panel primer only
MP-00081

Micanan Double V-Belt Mod. for PRO-J H HHD

  • Provides added strength to the belt drive system
MH00099

Micanan Bearing

  • Fits PRO-APT and PRO-HHD
  • Requires 2 per shaft
  • 3/4" Bore
9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

.319-3-3/4-RH-C

Torsion Spring .319 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 3-3/4" Length: 12 ft
OSH-6534-ECB-LH

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Z9955

Spring Gauge

  • Ruler style spring gauge
  • Stainless steel
  • Confirms spring ID & wire size
  • Place formed end between 2 coils count 20 coils to obtain wire size
C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF258
1003-4-DF-200FT

Bottom U-Rubber 4" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
1005-1-3/4-8'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
PRO-GH-10083U-R

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

  • Black - for door thickness of 1-3/8"
.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
PLATE078

Manaras Opera Motor Plate Green

  • Plate only
EHJ-311-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 115V-1Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
120BH

12" Heavy Brush Insert 6ft Long

  • Polypropylene bristles
OPJ-6532-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 600V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
TRACK-SET-2STD-12

2" Tracks Set 12'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

17-2001

LiftMaster Pulley 8" x 5/8" 4L Belt (K17-2001)

  • Same as K172001
.406_5-1/4"-RH

Torsion Spring .406 x 5-1/4" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 5-1/4"
  • Length: 12 ft
RB741

Linear / GTO 1-Button Transmitter 318 Mhz

  • Standard transmitter included with all GTO gate operators
  • Much smaller in size than previous model and improved signal range
  • The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
  • It is compatible with GTO and Mighty Mule gate operators
  • The code settings are the 9 dipswitches located inside the cover.
  • Measures: 2-1/2 H x 1-1/2 W x 9/16 D.
    • .......more details
BK311

Jamb bracket J-11 #11 12 gauge

  • Sold by the piece
  • Height 4.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

  • Shoulder Bolt
  • For SW470-S3
  • Formerly 82SB5008 G82SB5008