Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Long Range
71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual
41A4252-6G

LiftMaster Circuit Board Assembly ** Discontinued

  • Assembly includes: circuit board end panel and light socket
  • Also includes: 1 Multi-Function wall control panel - 2 wire
  • For chain drive units with two lights
  • Fits 1250 1260 1270 1280 220WD 320WD 5100 7200 & 8100
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
OPH-6533-ECB

Manaras Opera-H 3/4HP 600V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
TRANSF088

Manaras Transformer 480-24V 40VA

  • Transformer 480V Primary 24V Secondary 40VA
RADIO-22

Manaras MT3-1000 3-btn transmitter 313 MHz

  • Open/Close remote for 2 doors
  • Comes with LED battery life indicator
  • 9V battery included
  • Sunvisor clip included
  • To extent of inventory replaced by RADIO-EM903
Programming Instructions
2236.096

Whiting Coldsaver Intermediate Panel 12-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
MGR

Linear 1-Channel MegaCode Gate Receiver 318 MHz (DNR00104)

  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 1000000+ (MegaCode format)
  • RF frequency: 318 MHz
    • .......more details
Installation Manual
HAE00049

Linear Drive Sprocket Holder and Belt Clamp

300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

  • For door thickness of 1-5/8" to 1-3/4"
371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz **To Extent of Inventory

  • Visor clip and 3V lithium button cell (CR2032) battery included.
371LMC Manual
1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
RCB-2560

Roller Chain Break #25 thru #60

  • Replacement tip included.
1104-18FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 18' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
  • Full case quantity only (12).
7001-8-WHITE

Commercial Side & Top Weather-Strip 8' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
25-42-240

Extension Spring 7' Door - 240 lbs Blue w/ clip

  • Double - Loop end for strength
  • 25" long 42" stretch 240 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-3
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
25-10502

Truck Door Max Strength Steel Keeper for Todco Roll-Up Doors

  • Superior strength heavy-duty cast grade 30 steel Zinc plated finish.
  • Keeper accomodates padlocks and trailer seals
  • Cross Reference: T #6972 280100
CB5320500

Cable 5/32" 7x19 500' Galvanized

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
Comparison charts
RBH753L5-RH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
10-1000-CUSTOM

Strip Curtain PVC Door Custom Made ** Price by Quote Only

MDR-2

Linear 2-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates two devices
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
24-24-6

LiftMaster Small Relay 24VAC 11-Pin 3 PDT

BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

  • Universal spring anchor brackets - Residential/Commercial
  • Centerline adjustment: 3-5/16" to 6-3/4"
  • Bright zinc plated 8 gauge steel
  • No bearing
  • Bearing R5110 sold separately
T118

Manaras Trolley Track 18ft for 3/4HP & ALL APT models up-charge *Actual length 246"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
MA020

LiftMaster Mega Arm Replacement Cover

  • MA-020 is a Mega Arm Replacement Cover.
  • Compatible with LiftMaster® Mega Series (MA/MAS) Commercial Gate Operators ONLY
27119

Doorlec Electric Motor TEFC 3/4HP 208/480/575V DC423

  • Frame size is 56
50220

Doorlec Heavy-Duty Lifting J-Arm Assembly Trolley

  • 2026 - NEW Heavy Duty lifting arm.
7001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
17S

Rolling Steel 2" Flat Stamped Steel Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Does not include any rivets
7-28-1A

Lynx Standard Barlock Kit Bars sold Separately

  • Bars are sold separately.
  • Hardware bag for doors 12' and under
Assembly Manual
27025

Doorlec Electric Motor TEFC 1 HP 115/230V DC101C

Motor Replacement Chart
OTH-6233-AM06-M

Manaras Silencio APT Operator 3/4HP 208V 3Ph ECB Monitored with Photoeyes

  • The OTH-AM06 is a silent apartment style low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • 100 cycles per day
  • 3/4 HP operators come with # 41 roller chain
  • Ceiling Mount only 7.36" headroom clearance required below the tracks
  • UL325
    • .......more details
PEDALU4296

Aluminum Pedestal Post Dual Height 42" & 96"

  • Pedestal post with hood
  • High quality aluminum
  • 42" & 96"
  • Dual face-plate allows for easy wire connections
PAINT-PEN-WHITE-S

Garex Touch-Up Paint Pen Steel White

FORK001-RH

Manaras Disconnect Fork Right hand

7-6143

RW Door Snugger Zinc Plated Welded Chain

  • Bulit rugged with welded chain and lag bolts (included)
  • Used as a door pull to open and close
  • Fits most sliding doors
  • Quick latching
  • Locks tight and stays tight
  • Size: 1-1/2" x 15" long
    • .......more details
Specification Catalogue
7DUALTROLLEY20

LiftMaster Dual Trolley Mod TDC 7 to 20ft **TDC48-20 CHAIN PACK #48 20 FT RAILS x 111-5220 CRSBARROUND1" X 20' x 110-5820-P TRACKTROLLEYFOR 20FT DOORPRE-PUNCHED x 2DUALTROLLEYMOD48 MOD-KITDUAL TROLLEY48 CHN x 1

  • Includes: TDC48-20 CHAIN PACK #48 20 FT RAILS x 1 11-5220 CRSBARROUND1" X 20' x 1 10-5820-P TRACKTROLLEYFOR 20FT DOORPRE-PUNCHED x 2 DUALTROLLEYMOD48 MOD-KITDUAL TROLLEY48 CHN x 1
026-G019

Blue Giant Proximity Sensor M30 M12 Connector

  • (30mm Unshielded) Home/Lip Sensor
MOD163A

Manaras Heater in Reducer & C-Box 120V-1P 24VAC 15W + 30W

  • This modification is an option when ordering a commercial operator
7-6093BL

RW Bottom Cane Bolt 524 x 2 Black 1 only

  • Black plated
487135

Bircher Easy Loop Bracket

  • Bracket for part #487132
PRO-HBH-7553U-R

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
1-0243

RW Stay Roller 153 Galvanized

  • For use on #31 square track
Specification Catalogue
10TD900INDHH1

BEA 1-Button Digital Transmitter Nema 4 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • IP65
  • Operating temperature: -10 to 55C
  • Controls one 10RD900 receiver
TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

  • Chain pack only
  • TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.
.171-2-3/16-72-RH

Spring Wire .171 x 2-3/16 x 72" RHW Galvanized

5001-7-SANDSTONE

Residential Side & Top Weather-Strip 7' Long - Sandstone

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
22-002641

Ratchet Bar Only for Holdown Assembly ** Price by Quote Only

  • Ratchet bar only for the ratchet assembly#22-003769-1
P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

  • Allstar compatible
  • Three channel transmitter
  • 8 dipswitches 318 MHz
Programming Instructions
TS-1-183-GALV-KEY

Tube Shaft 1" x 183 (15'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
D1101KH-C-S-SSV2A

Doorbird Classic IP Video Door Station Stainless Steel Surface-Mount

  • Video intercom including surface mounting housing
  • Keypad Module: Configurable via App Up to 500 individual PIN codes Individual events (e.g. trigger a relay HTTP(s) request)
  • LAN connection (PoE compatible)
  • 2-Way audio
  • Ultra-wide angle lens HD video 1080P night vision IR LEDs
  • 4D motion sensor
    • .......more details
Installation Manual - DH11 Series
KW011

Manaras Keystock 3/16 x 1"

  • Sold per piece
H11G02-SS

Hinge #2 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

  • Chain pack only
  • TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors
K41-0374-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 700)

  • Maxum J-700
K005-KEY

Replacement Key for 3BXLT Key #5

  • Replacement key only for key #K005
RSH-6814-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes Right Hand

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
PUSH185

Manaras Contact Block NC XB5

EMX-1915-1

EMX Single Grey Hood For IRB-MON2/4X2 1 Piece Only

  • Grey coloured metal hood (1 hood)
OMH-6112-M-N1-LH

Manaras Opera-MH 1/2HP 120V 1Ph with Monitored Circuit Board N1 Eyes Left Hand

  • A medium-duty operator designed for use on standard high and vertical lift sectional doors and grills.
  • 14 cycles per hour 50 cycles per day
  • Included PHOTO 070 Nema 1 eyes
  • Includes mechanical brake
R6000

Shaft Collar 1" with 2 Set Screws

  • Set Screws: 5/16 x 18
041D0239-1

LiftMaster End Panel Replacement Kit

  • For use with various LiftMaster® and Chamberlain® 1/2 HP WiFi® Chain Drive and Belt Drive Garage Door Openers
OGH-6115-M-N1-RH

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
CRBH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
CarWash Modification
OSH-6534-M-N1-RH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
BEARING007

Manaras Flange Bearing ID 1"

  • Flange bearing for 1" shaft
MYQ-SGC2WLM

LiftMaster Smart Garage Camera ***To Extent of Inventory

  • The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
  • It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
  • myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
  • Video camera begins recording when motion is detected.
  • Easy setup with Bluetooth and magnetic mounting base.
  • Enables secure in-garage delivery for Amazon Prime packages
    • .......more details
10-8055

LiftMaster Counterweight Clamp for BG790

  • Also known as: G108055
CP-SH-34-16-1212

Lynx Complete Clutch Shaft Assembly for CDJH

  • 3/4" -16 x 12.50"
CB14B0250-KOR

Cable 1/4" 7x19 250' Galvanized Supreme

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
OSH-6533-M-N1-RH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

  • The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
  • The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
  • Control Board: model 780D
238-202

Serco S-Hook ** Price by Quote Only

  • For Serco loading docks
MRIN

LiftMaster Base Riser Mount for industrial operators

  • Works with LiftMaster IHSL24UL and INSL24UL slide gate operators
  • Provides a base-mount option instead of post-mounting the operators
Installation manualManuel d'installationRetrofit guideGuide d'installation
BCSI-PM203

Pivin Drapeau Chain/Spring Tensioner BCSI Gate Operator ** Price by Quote Only

MOD117

Manaras Special Application Chip Modification

MAX-ROLL-DOOR

Max-Roll Rapid Rubber Door Custom Order Price by Quote ONLY

  • Safe durable and easy to maintain.
  • For industrial commercial & institutional usage.
  • Quality materials & components at the forefront of technology.
  • Each door is custom ordered price by quote only
Data sheet
LRS-LC

EMX Logic Controller

  • For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
  • Connects two stand-alone sensors to expand the detection area
  • Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
  • Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
  • Provides six (6) selectable logic functions and two (2) separate relay outputs
  • A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors
    • .......more details
EHJW-353-1

Doorlec Ind Jackshaft Op. Watertight ECB 1 HP 575V-3Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
19-41ML-SS

Master Link #41 Stainless Steel

  • For #41 chain
LRS-DB-50

EMX Direct Burial Sensor with 50 ft Lead Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes direct burial sensor and 100 ft of lead wire
    • .......more details
1634-134-W

Elton Commercial Window for Flush Doors 1-3/4" thick 16x34 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 35-1/8" x 17-1/8"
  • Cut-out size: 33-7/8" x 15-7/8"
  • Vision area: 31-3/4" x 13-11/16"
  • Different glass options and frame colours are available upon request
    • .......more details
MOD163G

Manaras Heater in Reducer & C-Box 575V-3P 24VAC 15W + 30W

  • This modification is an option when ordering a commercial operator
HCT14

LiftMaster HCT Rail Only 14'

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
  • Will open a standard sectional door 13'6" high
GT-100A

Skylink Garage One Receiver Rolling Code ***To Extent of Inventory

  • Automatic door closer: Never forget to close your garage door again.
  • Built-in timer from 2 minutes to 20 minutes will close the door automatically.
  • Audio warning when door is about to close.
  • Kit includes: Monitor Sensor model: GS-101 and Reciever GC-433R
  • Advanced Rolling Code Technology
  • Replaces your traditional wall button with Wall Console
    • .......more details
23105

Doorlec U Bracket Control Cabinet Support - Rear

  • Works with various models such as ETBHW ETHW
CAPXLV

LiftMaster Smart Video Intercom - L *** Get Support

  • LiftMaster’s cloud-based video intercom for multi-tenant residential properties.
  • The intercom allows residents to see their visitors through live video and grants access to the building via the MyQ app
  • Display and interface – 10” color display with touchscreen
  • Connectivity – WiFi cellular wired high-speed DSL
  • Audio capabilities – Voice over IP – digital call quality with no long-distance charges
  • Video capabilities – One-way video calling with a 135-degree view
    • .......more details
LA500CONTUL

LiftMaster Standard 24VDC Control Box for Single and Dual Gate Applications Batteries Incl. UL325

  • Complete control box for new LA500U 2018 UL325 compliant
  • Includes box control board and batteries.
Q055

LiftMaster Limit Switch Kit K75-50189

  • Also known as: Q166 Q165
C-334-DUPLEX_INSTALLED

Spring Fitting Pair 3-3/4" for Duplexing (Short) installed

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • 3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.
    • .......more details
MP00070

Micanan Jackshaft w/Aux Trolley Assembly Mod. 8ft High Door #41 Trolley Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • NOTE: Operator must be supplied with reverse limits
  • If purchasing for field install the limits on the operator would need to be reversed
19-80HL-NP

Half (Offset) Link #80 Nickel Plated

  • For #80 chain
MOD114A

Manaras Synthetic Oil Upgrade Only

  • This Upgrade Mod. is only available when purchaed with a compatible operator
  • Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances
684-33-106

Universal Bracket 2.25" x 2.5" x 24" w/ Plate 2"x12"

RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

  • The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation manualSpec sheet