Devanco Canada - Get The Right Garage Door Opener‎ and Parts

NIR-50

Emx Industries Retro Reflective Photoeye Sensor with Reflector

Extended range for better performance in rain and snow
Compact design mounting hardware and indicators make it easy to install
Lower current draw of only 28mA makes it an excellent choice for solar and low voltage applications
Watertight package and optional protective hood offers protection for the NIR-50 from the elements and vandalism
Flexible voltage 12 – 240 Volts DC 24 – 240 Volts AC
Watertight package for reliable outdoor installation
Sensing range: 50 feet
Lead wire: 6 feet
2 LED indicators
Sensitivity adjustment •Compact size: 2.5" high 1.5" deep 0.75" wide

VBELT_5L340

VBelt 5L 34"

Fits Lynx HDC operator

.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

29202

Doorlec Transformer 550Vpr 120V sec. 35VA

K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

Service kit to connect new LED arm to existing barrier gate
Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply

DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

MT-1B

Linear 1-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery

.......more details

MODKIT013A

Manaras Timer to Close Kit 0s-100h Med-Duty

Timer To Close Kit for Manaras Commercial Door Operators with reversing contactor style control box.
Includes Timer base and all required wiring
Detailed installation instructions are included

Installation Manual

J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

Installation manual Manuel d'installation Sell sheet Brochure

K72-33841

LiftMaster Shaft-Sprocket Assembly Clutch MH

Kit includes: Compression spring Cotter pins and Bearing

H101L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Left Hand W/Brake ***No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

9150000620

3/32" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

SPF514-6

Spring Filler 12 ft Long No Fins

For use with 5-1/4" or 6" torsion springs
Accomodates both 1" and 1-1/4" shaft size

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

Maximum hi-lift: 164"
Capacity: 800 lbs per drum
Cable length: Floor to shaft center 181" minus amount of Hi-Lift
Cross reference: DNS 410-164 OMI 164HL M162-4165

K75-12586

LiftMaster Complete Brake Assembly GH 575V

Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.

Installation Manual Manuel d'installation

BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
Standard Features: Control inputs and Adjustable limit settings
02-102 Open/Close Push Button Included

Installation Manual Sell Sheet

OSH-6114-CONT-R

Manaras Opera-SH 1HP 120V 1Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

TR-GUARD

Track Guard Z type 60" high to Protect 3" Track Sold as a Pair

Provides impact protection to vertical track
11 gauge (.125 thick)
Galvanized steel no paint

26-40410

Truck Door T-Style Standard Side Seal 116"

Extruded from long lasting rubber
Seal protects cargo area from dirt and moisture
Used with standard J channel vertical angle with 1" track
Length: 116"
Cross reference: T #69840 W #4019 620200

71-B1PH

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for L5 Operators

Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators

41A5021-1M-315

LiftMaster Receiver Logic Board with Purple Learn Button *** Discontinued

For LiftMaster models: 1345 1346 1355 and 1356
For Chamberlain models: CG40D & CG42D
Replaces Reciever Logic Boards: 41A5021-1H-315 41A5021-4M-315 41A6135-1A 41A6148-1 and 41A6148-1A

CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

Galvanized cable 1/8" 7x7 500ft spool.
A higher quality cable than the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

105104

Linear Gate Safety Edge Transmitter

105104 is for adding obstacle sensing for motorized gates or barrier arms.
Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
Activates receiver for stop or reverse entrapment
No cables or coiled wires

.......more details

Installation Manual

K-T5011L4

LiftMaster Electrical Box Replacement Kit L4 K-T74-33015-1 ** Price by Quote Only

For models APT T SD 115V 1Ph L4

LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

For use with D-TEK detectors (most commonly used)
Hourglass shaped

MD-00030

Roller Chain #40 10' per Pack

22-460

Brake Solenoid 440-460V

Used on all brands of commercial door and gate operators
same as MK-00028

MK00108

Micanan Telemecanique Contactor 24V for Logic Board with Contactor Interface

LC2K1210B7 mini contactor

MO00001

Micanan Cam Plate Compression Spring (.178 ID)

2 required per operator
.178 ID x 032G x 55L)

MH00009

Micanan Flange Bearing 1" ID x 2" OD

2 required per operator

MH00001

Micanan Bronze T-Bushing 3/8" ID

2 required per operator

K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

27-20114

Truck Door W-Style Spring Assembly Curbside RHW 35" Long

Wire thickness: .187
Assembled Spring length: 35 inches long
Inside diameter: 2 3/16"
Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.

97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

K001A6039

LiftMaster Control Board for LA400

Replaces P/N 127A0071C PN 127A0071F

Installation Manual

MA013

LiftMaster Shear Pin #6 (Standard)

For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

H12G08-SS

Hinge #8 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

Double Angle Rails for doors up to 16' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 18' 11"

41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

K1D8080-1CC

LiftMaster Expansion Board for LA500DC

MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

For 1/3 HP and 1/2 HP operators only

41DS002-2

LiftMaster Electronic Circuit Board Screw Drive Models 3840 *Discontinued*

Logic Control Board 315 MHz
Compatible with 3840 Screw Drive Purple Learn Button

5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

Emitter only. If receiver is required order PD180CBT30Q
For Industrial doors and Gates
Range: 30M
Relay output
Supply voltage emitter: 2 x 3.6VDC lithium batteries
Dimensions: 180m x 51 x 49m

.......more details

Installation Manual

21-10340

Transformer 115-24V AC 20VA

120V Primary 24V Secondary 20VA

M005

Rolling Steel Groove Mouth GM6789 Fire Door

271723

Rolling Steel Slide Bolts for Bottom Bar 679

285547

Rolling Steel Aluminum Transition Piece Sold per Foot

E076

Rolling Steel Aluminum Bottom Bar 679 Extrusion Sold per Foot

7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

A Whiting original

21-35077

LiftMaster Transformer 575V 24V 40VA

575V PRIMARY 24V SECONDARY 40VA
Same as K21-35077

342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

Standard size panel primer only

UN201

LiftMaster Thermostat Controlled 500-Watt Heater & fan for MAT Gate Operators and more

For temperatures below 32 F
Designed for use with Mega Arm Tower gate operator
Can be used for other applications as required
Heater operates when termperatures are below freezing
Plugs into a standard 120V outlet
500 Watts with a circulating fan

.......more details

Installation Manual

GH753-L5

LiftMaster Gearhead with Brake 3/4HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

PHOTO-008B

Manaras Non-Monitored Photoelectric Cells Nema 4/12 *** Discontinued

Through-beam type 24V

Installation Manual

.343-6-RH-C

Torsion Spring .343 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 6" Length: 12 ft

.331-2-5/8-LH-C

Torsion Spring .331 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 2-5/8" Length: 12 ft

.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 3-3/4" Length: 12 ft

.234-1-3/4-RH-C

Torsion Spring .234 x 1-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 1-3/4" Length: 12 ft

.225-1-3/4-LH-C

Torsion Spring .225 x 1-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .225 ID: 1-3/4" Length: 12 ft

.218-1-3/4-RH-C

Torsion Spring .218 x 1-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .218 ID: 1-3/4" Length: 12 ft

BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

Universal spring anchor brackets - Residential/Commercial
Centerline adjustment: 3-5/16" to 6-3/4"
Bright zinc plated 8 gauge steel
No bearing
Bearing R5110 sold separately

PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

Wand only
Requires CS101 (Carsense-101)

41A5434-11

LiftMaster Full Belt Assembly for 7ft Door For Models 2001 and up

For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D

BK308

Jamb bracket J-08 #8 12 gauge

Sold by the piece
Height 4.00" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK301

Jamb bracket J-01 #1 12 gauge

Sold by the piece
Height 2.40" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

36605A

Genie Pulley Assembly Belt Drive *** NLA

Genie 36605A PULLEY
For Belt Drive Models
For Chain lift Belt Lift ReliaG 600 & 800 1022 1024 1042 2022 2024 2042
Also for Overhead Door Models Legacy 800 & Standard Drive Belt

SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

Actual length is approx. 16'-1"

9150000627

1/8" Stops ONLY 100/pkg

Stops only 100 per pack

MX00147-OLD

Micanan Complete Clutch Kit for PRO-TB Old Style Frame

Before 2006
9" Diameter

SEL2641R433-IP5

Erone 2-Relay Stand Alone Receiver Up to 500 Users 433MHz

2 transmitter keys per user
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
12/24V AC/DC

Wireless System Chart

P219-1

Heddolf 1-Button Mini Transmitter 318MHz ** Available to Extent of Inventory

Open/Close mini remote for 1 door
8 dip switch
Allstar compatible

Programming Instructions

MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

OSH-6232-ECB

Manaras Opera-SH 1/2 HP 208V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

OSH-6212-ECB

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

OHJ-6534-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 600V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OPH-6434-ECB

Manaras Opera-H 1 HP 480V 3 Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

OPJ-6534-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 600V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

37407

Doorlec Reversing Contactor BF9 24VAC

37301

Reversing Contactor RM12 24VAC - ** NLA

No longer available.
Possible substitution # 37407

VBELT_4L355

Doorlec VBelt 4L 35.5" *** NLA

Same as part number 19045

SETMCIC9V

Erone 1-Channel Wireless Module 433 MHz

You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V) and black (0V) wire into power supply
Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
Works with any 433 MHz Erone receiver

75W-RS-BULB

Rough Service Bulb 75W ** Disc. to extent of inventory

33950R

Genie Up Limit Switch Assembly 66 " Wire

For use on 7'6" rail assemblies.
For Genie Excelerator models and Overhead Overdrive models
Open / Up magnetic limit switch

773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

7001-10-W/B

Commercial Side & Top Weather-Strip 10' Long - White/Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

802

Fasteners Sleeve Anchor 3/8" x 1-7/8" 100/Box

Secure anchoring into concrete brick or block

MX00140-110-OLD

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Inside - Old Model

K204C0211

LiftMaster Torroid Transformer

Transformer replacement kit for use with various LiftMaster® Commercial Slide and Swing Gate Operators

109099

LiftMaster Flat Wall Plate Mounting Bracket

Heavy 1/4" steel plate bracket used for wall mounting of side-mount operators.
Slots in back allow for tensioning of drive chain.
Mouting studs match up with mounting holes of LiftMaster Models DJ DH J MGJ H and GH operators.

OTBH-6113-1-ECB

Manaras Trolley Operator 3/4HP 120V 1Ph with Electronic Circuit Board

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation Manual Sell Sheet

97798

Marantec 2 Piece Logic Board with Terminal Strip for EOS Models

For use on Easy Operating System (EOS) units 4500E 4700E and M50.
Includes the terminal strip for direct replacement of boards that had a power surge or burned out.
The marantec old model number was 78914 it is now 97798.