Devanco Canada - Get The Right Garage Door Opener‎ and Parts

K72-33841

LiftMaster Shaft-Sprocket Assembly Clutch MH

Kit includes: Compression spring Cotter pins and Bearing

10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

15-19478

LiftMaster Sprocket Assembly

For model H (2005-present)
48B32T with hub

.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

SPF514-6

Spring Filler 12 ft Long No Fins

For use with 5-1/4" or 6" torsion springs
Accomodates both 1" and 1-1/4" shaft size

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

Maximum hi-lift: 164"
Capacity: 800 lbs per drum
Cable length: Floor to shaft center 181" minus amount of Hi-Lift
Cross reference: DNS 410-164 OMI 164HL M162-4165

K75-12586

LiftMaster Complete Brake Assembly GH 575V

Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.

Installation Manual Manuel d'installation

BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
Standard Features: Control inputs and Adjustable limit settings
02-102 Open/Close Push Button Included

Installation Manual Sell Sheet

TR-GUARD

Track Guard Z type 60" high to Protect 3" Track Sold as a Pair

Provides impact protection to vertical track
11 gauge (.125 thick)
Galvanized steel no paint

71-B1PH

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for L5 Operators

Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators

41A5021-1M-315

LiftMaster Receiver Logic Board with Purple Learn Button *** Discontinued

For LiftMaster models: 1345 1346 1355 and 1356
For Chamberlain models: CG40D & CG42D
Replaces Reciever Logic Boards: 41A5021-1H-315 41A5021-4M-315 41A6135-1A 41A6148-1 and 41A6148-1A

MK-00005

Micanan Cut-Out Limit Switch

OPH-6112-CONT-L

Manaras Opera-H 1/2HP 120V 1Ph with Mechanical Contactor Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

Galvanized cable 1/8" 7x7 500ft spool.
A higher quality cable than the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

105104

Linear Gate Safety Edge Transmitter

105104 is for adding obstacle sensing for motorized gates or barrier arms.
Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
Activates receiver for stop or reverse entrapment
No cables or coiled wires

.......more details

Installation Manual

LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

For use with D-TEK detectors (most commonly used)
Hourglass shaped

MD-00030

Roller Chain #40 10' per Pack

22-460

Brake Solenoid 440-460V

Used on all brands of commercial door and gate operators
same as MK-00028

MK00108

Micanan Telemecanique Contactor 24V for Logic Board with Contactor Interface

LC2K1210B7 mini contactor

MH00009

Micanan Flange Bearing 1" ID x 2" OD

2 required per operator

K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

27-20114

Truck Door W-Style Spring Assembly Curbside RHW 35" Long

Wire thickness: .187
Assembled Spring length: 35 inches long
Inside diameter: 2 3/16"
Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.

50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

Five feet long.
OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
The weight of the vehicle compresses an electric switch which sends an open signal to the door.
Requires a 2-wire connection to the operator but does not require power to function

97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

MA013

LiftMaster Shear Pin #6 (Standard)

For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

12-19504

LiftMaster Flanged Bearing 1" Keyed

H12G08-SS

Hinge #8 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

Double Angle Rails for doors up to 16' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 18' 11"

BRAKE013

Manaras Band Brake Assembly Kit OSH

Installation Manual

MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

For 1/3 HP and 1/2 HP operators only

41DS002-2

LiftMaster Electronic Circuit Board Screw Drive Models 3840 *Discontinued*

Logic Control Board 315 MHz
Compatible with 3840 Screw Drive Purple Learn Button

5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

Jack Shaft Mounting plastic guide 4.5:1 reduction
Gear drive
Fits 3-3/8" minimum offset
Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
1 chain keeper
2 shaft collars

.......more details

Sell sheet

B025

Rolling Steel Assembled Angles 2" x 2"x 3/16" Sold per Foot

Includes angles astragal and 1/2 slat

21-35077

LiftMaster Transformer 575V 24V 40VA

575V PRIMARY 24V SECONDARY 40VA
Same as K21-35077

340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

Primer only
Customer to specify exact length

342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

Standard size panel primer only

G7M

Skylink 2-Button Universal Keychain Remote

Controls up to two different garage door motors wirelessly.
It can be used as a keychain remote or with the included wall mount bracket or included visor clip for your car.
It operates most national brand garage door openers and is very simple to set up by selecting the brand using an indicator dial on the back.
Skylink G7M is compatible with the following garage door opener models:
Chamberlain and LiftMaster since 1983
Sears Craftsman since 1983

.......more details

Programming Instructions

ST18COP

Copper Stop 1/8" 100 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL18COP

.331-2-5/8-LH-C

Torsion Spring .331 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 2-5/8" Length: 12 ft

.283-3-3/4-LH-C

Torsion Spring .283 x 3-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 3-3/4" Length: 12 ft

.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 3-3/4" Length: 12 ft

.225-1-3/4-LH-C

Torsion Spring .225 x 1-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .225 ID: 1-3/4" Length: 12 ft

.218-1-3/4-RH-C

Torsion Spring .218 x 1-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .218 ID: 1-3/4" Length: 12 ft

CPS-MEI

LiftMaster Electric Edge Card **to extent of inventory

The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
Same as Miller Edge SM-102

PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

Wand only
Requires CS101 (Carsense-101)

41A5434-11

LiftMaster Full Belt Assembly for 7ft Door For Models 2001 and up

For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D

BK308

Jamb bracket J-08 #8 12 gauge

Sold by the piece
Height 4.00" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK301

Jamb bracket J-01 #1 12 gauge

Sold by the piece
Height 2.40" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

MR00007

Micanan Brake Disconnect Cable 1/16" x 12"L c/w Cable Stop

2 Required per operator

YSG12-24LED

Devanco Stop and Go Light Yellow Housing 12-24V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied

.......more details

Installation Instructions Instructions d'installation Sell Sheet

MX00147-OLD

Micanan Complete Clutch Kit for PRO-TB Old Style Frame

Before 2006
9" Diameter

27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

ase mount

Wiring diagram for 120V Wiring diagram for 230V

OSH-6232-ECB

Manaras Opera-SH 1/2 HP 208V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

OHJ-6534-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 600V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OPH-6214-ECB

Manaras Opera-H 1 HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

OPJ-6114-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 120V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

37407

Doorlec Reversing Contactor BF9 24VAC

CLUTCHPAD005

Manaras Clutch Pad 5/8" ID 4" OD

Made from commercial grey vulcanized fiber

SETMCIC9V

Erone 1-Channel Wireless Module 433 MHz

You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V) and black (0V) wire into power supply
Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
Works with any 433 MHz Erone receiver

36664R

Genie Screw Drive Shuttle Assembly

Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
Works with Screw Drive carriage assembly part # 37845R - sold seperatelty

HSC-600-JAWS

Replacement Jaws for Hand Swager

Can be used as replacement jaws for both the HSC-600 hand model and the HSC-600-B bench model

803

Fasteners Sleeve Anchor 3/8" x 3" 50/Box

Secure anchoring into concrete brick or block

K204C0211

LiftMaster Torroid Transformer

Transformer replacement kit for use with various LiftMaster® Commercial Slide and Swing Gate Operators

MD00086

Micanan Sprocket 40B18 x 1" 1/4" Keyway

BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

790

Fasteners Hex Nut 3/8-16 1000/Box

BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

For residential applications. Use CBS-338 for commercial / industrial applications
Zinc plated 11-guage steel
1" bore bearing installed
Single clipped end

RBH501L5-RH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 *** To Extent of Inventory

With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Brake standard on all RBH operators
#48 chain #50 output sprocket chain
Box does not include spreader

.......more details

Installation Manual Manuel d'Installation Sell sheet

79-11378

LiftMaster Circuit Board Assembly for LGJ **NLA - Discontinued 2015

Same as part number K79-13743

751

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) 1000/Box

7/16" Head
Indented hex washer head
Max RPM = 2000

CH505L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

CH501L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 75

17-6014

LiftMaster Motor Pulley 5L 5/8" ID x 2" OD

Fits model H operator with Logic 5
5/8" ID x 2" OD

K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

230/460V PRIMARY 24V SECONDARY 20VA

V1001-B

Elton Dual Fin Vinyl Insert Black Price per Foot

71B575G

LiftMaster Brake Kit 575V with Solenoid Field Install SL585 and SL595

Kit comes complete with: Brake hub kit brake release lever brake disk spring cup studs compression springs brake solenoid solenoid cover spacers mounting plate pressure plate feather key and conduit.

Instruction Manual

T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

OTBH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain

Installation Manual Sell Sheet

MP-00001

Micanan Timer to Close 24V Modification

3-button o/c/s function timer will start counting from fully open reverse and reset from any device
24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)

165-B

Fusible Link For Loads 1 to 10 lbs

Length is 1.4328" width is .563"
Distance between center is .938"
Priced per each
Fire rated at 165 degrees Fahrenheit

165-A

Fusible Link For Loads 1 to 30 lbs

Length is 2.625" width is .875"
Distance between centers is 1.75"
Priced per each
Fire rated at 165 degrees Fahrenheit

41AC075-2

LiftMaster Circuit Board Assembly for Dual Capacitor Models 315Mhz ** To extent of inventory

Assembly includes: End panel Logic board and Light socket
For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
Also known as 41AB075-2 41AC075-2 041AC075-2A

94-61180-33-84

Truck Door 2" Steel Roller 6" Stem for Whiting Roll-Up Doors

open-bearing roller

D111904

Mitto B RCB02 2-Channel Transmitter

Compatible with Lux 2B gate operator

BEA-REMOTE

BEA Falcon Programming Remote

Makes it easy to set up and make adjustments to all key parameters of the Falcon motion detector while at ground level

Programming instructions

MV-00026

Micanan 24V Commercial Receiver CR32-24V

Programming Instructions

G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

Increases one number each time current is applied
Connects to the 24 volts of contactor coil
Simple 2-wire connection
Same as 50-12862

8FT-CHAIN-LDO

Linear 8ft Chain Rail for LD050/LS050/LDCO (HCT8C)

8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

DF084.1

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

36163R

Genie Dual Frequency Intellicode Receiver 315 MHz & 390 MHz

For Genie Intellicode Rolling Code remotes Or Overhead Door Code Dodger remotes using the 315 or 390MHz frequency.
24-Volt 3-Wire Connection For Garage Door Opener And Gate Openers.
Accepts Up To 8 Genie Intellicode Or Overhead Door Code Dodger remotes on 315 or 390MHz Frequency. Note: Will not work with the older code switch type of remotes.