Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Transmitters
MTR3

Linear 3-Channel Visor Transmitter 318MHz ** To extent of Inventory

  • Activates three MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Visor clip mounts vertical or horizontal
  • Power: One 2032 battery
  • Codes: 1000000+ (MegaCode format)
  • RF Frequency: 318 MHz
  • Dimensions: 3" W x 1.7" H x .6" D
  • Replacement battery CR2032
Programming instructionsInstructions de programmation
BK111/PR

End Bearing Plate Flanged Heavy Duty 8-GA 3-3/8" without Bearing. Sold as a pair

  • They have 4 slots surrounding the hole to accommodate a regular bearing (with flange).
  • A pillow block bearing could be used if needed
  • Includes (1) RH and (1) LH plate
RSW12UL

LiftMaster Res. / Light Comm. DC Swing Gate Operator 12VDC Heater Not Incl.

  • Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
  • Features battery backup that provides up to 147 cycles or 63 days of standby power
  • Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
  • Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
  • myQ® Technology enables you to securely control and monitor your gate operator from anywhere
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
    • .......more details
Sell sheetBrochure
REDUCER030

Manaras Reducer CC63-40D Frame 56

VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
SPRING001

Manaras Cam Guide Plate Spring

SPR41B44-1

Sprocket 41B44-1" shaft

26124

Doorlec Clutch Shaft 11-3/4" x 5/8" LJH

  • Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size
K10-10166

LiftMaster Clutch Plate

  • Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230
2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

S505AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 5ft

  • Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
  • Fast easy to install mounts vertically or horizontally
  • Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs
Installation manual
PTRR5-C

Telco Light Curtain Fastening Clips 3 pcs/Bag

CAP475

Capacitor 125VAC 475MFD

  • Motor Start Capacitor 125V 475 MFD
BK009

Commercial Top Bracket Adjustable 1-Bolt Tall Sold per Piece

  • Zinc plated
  • 12 gauge roller carrier and base plate
50690

Doorlec Clutch Assembly for ETBH

3055

End Stile Keyed L-Handle With Locking Cylinder and 7-1/2" Latch Mechanism

CH503L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
CH503L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
MIL-HYD-KIT

Milwaukee M18 Fuel 1/4" Hex Hydraulic Impact Driver Kit 2760-22CT

  • Kit includes: Tool carrying case (2) M18 REDLITHIUM 2.0 Compact Battery Packs and charger
  • FLUID-DRIVE™ Hydraulic Powertrain:
  • Reduces metal-on-metal contact inside the tool
  • Minimizes wear for increased durability compared to standard impact drivers
  • Delivers smoother performance longer service life and quieter operation
  • Completely sealed mechanism filled with hydraulic fluid
    • .......more details
K1A6408

LiftMaster APE Kit 24V

  • For use with various LiftMaster® Swing Gate and Slide Gate Operators
K76-37667-2

LiftMaster Limit Box Kit

  • Compatible with model SL585 Slide Gate Operators.
H-0168

Autogate VBelt Banded B-66

  • New Style Double Reduction
K20-3050C-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 L or M

  • Standard 1/2 hp motor
  • This is a replacement Motor Kit (1/2 HP 230/460V 3PH CF)
  • For use with various LiftMaster® Three Phase Gear-Reduced Commercial Door Operators and Slide Gate Operators
  • Also known as: 6002242 K20-3050C-4 203050 K20-3050C4 20-3050C-4 203050C4 20-3050C-4P
PHOTO-070

Manaras Monitored Photoelectric Cells N1 Thru-Beam 45' Range

  • Monitored NEMA 1 enclosure through-beam type photocell
  • 4-Wire
  • Indoor
  • Range: 45 ft
Manual
POWERHINGE

LiftMaster Power Hinge - All Steel Pair

  • Elite Power Hinge ball bearing hinges for steel swing gate (Pair)
  • Double 5/8 in. ball bearings for smooth operation
  • 3/4 in. solid stainless steel shaft grounded and tempered to Rockwell standards
  • Continuous cycle operation self-lubricating/no grease fittings
  • Offers a unique design so the gate never hits the post
  • 3000 lbs. per pair weight capacity
    • .......more details
Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

  • Hand crank for SL3000
CGH751L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GD-WAX

Devanco Canada Garage Door Wax 467g Aerosol

  • Ozone Friendly Door Wax with anti-wear and extreme pressure additives.
  • Silicone Free
  • Aerosol Wax that sprays on and buffs effortlessly to create hard shell finish. •Excellent wax for anything that needs reviving shines all painted surfaces.
  • 16.5 oz Cans
  • Available for private label
Safety data sheetFiche de données de sécurité
2807.148.200

Whiting .148 x 2-3/16 x 20" Curbside with Cones

PRO-APTC-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
36-54-200

Extension Spring 9' Door - 200 lbs *** Special Order

  • Clipped ends
  • 36" long 54" stretch 200 lb load
.363-334-L-C

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
.331-258-L-C

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.319-334-R-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-375-Installed
.273-258-L-C

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-2-R-C

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-2-R-C

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
MOTOR189

Manaras Electric Motor 1/2HP 120V 1PH

  • Instant reverse
  • Medium-duty 1050 rpm
  • For OMT MLJ MLH MLT
ME116-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide-in edge for sectional doors.
  • With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
  • ME116 is resistant to flame water and most common greases and oils
  • Soft ends
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
    • .......more details
PRO-H-5053-E-RH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
PRO-H-5021-U-LH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
821LMB-SENSOR

LiftMaster Extra Door Sensor for 821LMB Second Generation *** To Extent Of Inventory

  • This add-on door sensor works with the MyQ Smart Garage Hub to monitor and control a second garage door opener.
  • This version of the MyQ door sensor is only compatible with the new MyQ Smart Garage Hub by LiftMaster Model 821LMB.
  • Installation and Programming is easy: Mount to inside top panel of garage door and add to an existing MyQ account through the MyQ app
  • Not compatible with MyQ Garage (821LM)
K71-D3PH

LiftMaster Drum Brake Kit 3 Ph 208/230/460V (Late Model Logic 5 Shoe and Drum Models)

  • Internal Solenoid Drum Brake with Cable Replacement Kit.
  • Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
  • Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
  • Quiet preferred sound profile
  • Industry benchmark stopping performance with adjustability
  • Significantly reduced modes of failure
    • .......more details
Installation manualManuel d'installation
CP-SH-34-1712-EXP

Lynx Clutch Shaft Assembly for Explosion-Proof HDC Operators

  • Modified for explosion-proof operators
  • 3/4" x 22 x 3-1/2" thread
MDT-1A

Linear 1-Channel Visor Transmitter MegaCode 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1000000 codes
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
    • .......more details
Programming instructions
MK-00644

Micanan Plug-In Harness for Limit Switch Circuit Board 6-Wire

  • Limit Harness for MK00641 MK00488 MK00642 circuit boards
MK-00052

Micanan Overload Reset 3-Phase 5.5 - 8.0 Amps

MK-00931

Micanan Single Btn Mini Transmitter ** Discontinued

MV-00237

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 4 Surface Mount

MV-00305

Micanan Wireless Pull Cord

MV-00172

Micanan LCE-3 Nema-1 Pushbutton Control Station

  • Flush mount
SPR60B18X1

Sprocket 60B18 x 1" Bore 1/4" KW

  • Same as MD00425
PRO-J-10083-U-LH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
.421-334-R

Cut-to-Length Torsion Spring .421 x 3-3/4" Right Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
LMWETXU

LiftMaster Wireless Edge Transmitter Monitored

  • Connects to wireless edge receiver using low-energy Bluetooth transmission
  • Sensing distance up to 130 ft
  • Transmitter accepts up to 2 wired resistive edges
  • Battery life 2 years
  • NEMA 4X rated
  • Compatible with LMWEKITU Wireless Edge Kit and L50 and S50 Monitored Resistive Edges
    • .......more details
Installation manualManuel d'installationProduct GuideGuide de produit
42GRR-AB

Allen Bradley Thru-Beam Photocell RX/TX Long Range 42GRR9001+GRL9040

BCH755L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph L5 Right Hand ***Replaced by CRBH755L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Comes with CPS-UN4 photoeyes
  • External brake included
SPRAY-525

Aluminum Touch Up Spray Paint 350g Black / Noir #525

  • 350g
ALUM-5P6

Aluminum 24" x 100' Spool Iron Ore / Minerai de Fer # 5P6

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P6
  • Reverse side is #431 Bright White
Colour chart
25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

  • Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
  • Vehicle is now ready for roll-up door installation
  • Corner post has added lip length to allow easier weld during installation
  • Steel construction .125 thick
  • Each bulk kit includes two (2) corner posts and one (1) header
  • Plain finish
    • .......more details
PRO-LT-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
811-11

Wheel Chock 811-11 Orange Urethane

  • Not For Use on Ice
  • High Visibility
  • Orange Urethane
  • Size: 11" wide x 8" long x 8" high
172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

  • Wall mounting
  • 4:1 reduction
  • Maximum pull allowed on hand chain is 35lb
  • Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch
Sell sheet
BG770-50-11

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 115V 1 Ph *Discontinued Replaced by MATDCBB3*

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
  • 2-btn control station Open/Close
  • Fully adjustable limit system
  • Pad mount
  • Security+ 2.0 technology
    • .......more details
CP-SH-58-1212

Lynx Clutch Shaft Only for MCJH 5/8" x 12-1/2"

  • No pulley
RBH503L5-LH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
SPUR_GEAR

Spur Gear For Holdown Assembly

27-24416

Truck Door Dual Torsion Spring Assembly 96/33 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 33" Wire diameter: .182 Winding cone color: Green
DBE-20

Molded Rubber Bumper Black 20" L x 4 1/2" W 3" Projection 4-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 4 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
LB1212-14

Laminated Bumper Standard Black 12" L x 14" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB810-24

Laminated Bumper Standard Black 10" x 24" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8010-8FT

LiftMaster DC Chain / Cable Drive Garage Door Opener with 8ft SSR Rail (1608LM) ***No Longer Available

  • Customized DC Motor with soft start/stop action.
  • Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
  • Security+2.0 increases remote control range and reduces interference for consistent operation.
  • PosiLock® electronically protects against forced openings.
  • The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
  • Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)
    • .......more details
LVB636-11

Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-14

Laminated Bumper Standard Black 12" x 14" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-24

Laminated Bumper Standard Black 10" x 24" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
MK-00546

Micanan Heater Probe in Reducer Mod. (24V 20W 3/8" NPT)

BPPVCT

Garex PVC White Transition Moulding 289" #3764

  • Universal garage door panel adapter molding
  • Use on any 1-3/4" door
  • Allows a Garex panel to be used as replacement on any brand door
  • 24' lengths only can be cut for transport
R2

Erone Radium 2-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
Wireless System Chart
CB380250

Cable 3/8" 6x36 IWRC 250' Galvanized Wire Rope

  • This rope is most commonly used on small overhead cranes and pulley systems.
  • Provides strength and flexibility but not a lot of wear resistance.
  • Cable break strength: 13600 lbs
NUT015

Manaras Hex Nut 5/8-24 UNEF

K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

41A4208-2

LiftMaster Chain Spreader Kit

  • Chain Spreader Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® Chain drive garage door opener models.
  • Complete kit includes: Chain spreader replacement screws and washers.
  • Also known as: 41A4208 41A4208-2 062210
25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

  • Double - Loop end for strength
  • 25" long 42" stretch 260 lb load
  • Sold individually
  • Rated for 10000 cycles
MIRF-Z2

Miller Edge Patriot 2 Photo Eye Fail Safe 30ft Non-Contact

  • Meets current UL325 standards for commercial door and gate operators*
  • Thru Beam technology minimizes false reflective signals
  • Travels with the door
  • Easy to Align
  • No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
  • Convenient - Assemble and install in the field
    • .......more details
38123A

Genie Powerhead Mounting Flange

  • Mounting bracket connects the powerhead to the rail assembly.
  • A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
  • Fits TriloG PowerLift GPower and PowerMax Operators
36645R

Genie Screw Drive Coupler

  • This coupler only works on the following models manufactured after June 2011.
  • TriloG 1200 (3064) TriloG 1500 (4064)
  • PowerMax 1200 (3062) PowerMax 1500 (4062)
  • GPower 900 (2564)
  • Powerlift 900 (2562)
MK-00646

Micanan 9" Coax Cable for On-Board Receiver

H503L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
2806.139*170

Whiting .139 x 2-3/16 x 17" L Roadside with Cones

  • For Curbside order part # 2807.139.170
2650-112-11

Linear Cold Weather Package HSLG 230V

  • Factory Option 2650-112-11 Cold Weather Package for 230-volt HSLG
  • Package includes: Arctic Oil Heater Cogged Belt
  • This factory option is only available for purchase when buying your gate operator.
FMB01DW24

Timer Multifunction 11-Pin

  • Carlo Gavazzi multi-function timer
  • Time range 0.05 s to 300 h
  • Knob selection of time range
  • Knob adjustable time setting
  • Knob selection of operating mode (6 functions): A - delay on operate B - symmetrical recycler OFF first B2 - symmetrical recycler ON first C - signal ON/OFF delay D - delay on release E - interval
  • Manual start
    • .......more details
41C5497

LiftMaster Wiring Harness Kit High Voltage

  • For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001
DM18VL-T/FORCE

Cable Drum Vertical Lift 18' D1100-216-1 Pair Torque Force

  • 18' Vertical Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 18'-1".
  • Rated Lift per Drum: 660 lbs.
  • Max. Cable Diameter: 3/16".
    • .......more details
ALUM-5P4

Aluminum 24" x 100' Spool Metallic Gray / Gris Metallique # 5P4

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P4
  • Reverse side is #431 Bright White
Colour chart
22-01184

Truck Door Three Whole Hinge Utility Style

  • Aluminum Extrusion
  • Cross Reference: Utility #3-4100-0022
PRO-HHD-7581U-R

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet
E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

  • Increases visibility of the arm on BL229 gate operator