Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-PL-20053

Micanan Wall Mount Control Panel Mod. Contactor 20" x 16" x 8" Stainless Steel Panel Nema 4/12

Standard features include B2 C2 wiring 24V controls Hinged cover Backplate Primary fuses in panel

50183

Doorlec Brake Assembly 575V

Brake assembly consists of solenoid drum shoes plate spring cover and fasteners
For all V-belt driven models that have brakes

COLLAR002

Manaras Steel Collar 0.375" ID

SL-310R

Skylink Universal Receiver 310 MHz ** No Longer Available **

This "Universal" Receiver guaranteed to work with any garage door opener regardless of age or brand (US & Canada only).
Works with Skylink Universal Transmitter: Model SL-310T SL-310T2.
Operates at 310MHz.

KPR2000

LiftMaster Wired Keypad and Proximity Reader

The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
Supports HID 26 and 30-bit Wiegand proximity card formats.
Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
Latch Mode allows you to hold open a door or gate for an extended period of time.
Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.

.......more details

Installation instructions Manuel d'installation Sell sheet Brochure Wiring instructions Instructions de cablage

MX00002-110V

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Outside - Old Style

Replaces MX00140-110V

CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

Same as Garaga CF101

760130

FAAC Capacitor 115V 25 MFD

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

MK-00660

Micanan 1 Channel Hand Held Transmitter (for APT applications) Sold Individually

Sold in packs of 10. Priced per transmitter

37502

Doorlec DC-2000 Electronic Circuit Board for Constant Pressure Close

Works in all Doorlec model openers except R-99
Input power to board is 120V
24V DC available on terminals 9 & 11
Accessory power on terminals 1 & 11
Programmed to work with constant pressure to close

.312-6-L

Cut-to-Length Torsion Spring .312 x 6" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

41C5141-1

LiftMaster Square Rail Trolley Kit Chain Drive

Same as: 062313 41C5141 41C5141-1
Compatible with all Chamberlain and Craftsman square rail chain drive models

PW-110

Devanco Power Wipes Heavy Duty Dual Sided Cleaning Towels 110/Bucket

These towels have an abrasive side for tough scrubbing and a smooth side for delicate surfaces.
They are loaded with commercial grade cleaning power and won't dry out like the competition
110 double-sided 12" x 8" towels Citrus scent
Safer than harsh thinners or gasoline
Use on nonporous/nonabsorbent surfaces to include: all metal surfaces sealed wood equipment vinyl and ceramic tile.
We recommend testing on plastics rubber and latex paint in inconspicuous areas before use.

.......more details

Safety data sheet Fiche de données de sécurité

MCJH-12-115-ECB

Lynx MCJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325 ** Replaced by CDJH

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

Shaft Mounted Junior Hoist
4:1 Reduced Drive
Sprocket: 41B36. Bore size: 1-1/4" diameter
Cross Reference: OMI 4020
Requires minimum 3/8" center line offset.
Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

.......more details

Sell sheet

ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 559
Reverse side is #431 Bright White

Colour chart

757-325

Fasteners Lag Screw Hex Washer Regular Profile 5/16" x 1-5/8" 325/Bag KH

7/16" head
Ideal for fastening tracks to the wall

MJ5011U

LiftMaster Medium-Duty Jackshaft Op 1/2HP 115V

The MJ door operator is designed for use on vertical lift sectional doors or small rolling doors and grilles.
Maximum recommended duty cycle: 12 cycles per hour
Floor level disconnect
Adjustable friction clutch
Heavy-duty solenoid actuated brake
Easily field converted for right or left mounting

.......more details

Installation manual Sell sheet

CR2025

3V Lithium Button Cell

21701

Doorlec Limit Switch Single ATM 15 AMP

50030

Doorlec Key Switch with Spring Return in Waterproof Housing

Weatherproof start key switch
Nema 4 enclosure.
Cast aluminum base with tamperproof aluminum cover
Rating: 10 amps 124VAC
Contacts: Single pole silver alloy momentary contact
Two keys supplied with each switch

.......more details

JANUS-DOOR

Janus Insulated Mini Storage Door Special Order

Price varies depending on colour size and model

2704.192_340

Whiting Roadside Torsion Spring 2-3/16" ID 34" Long

Torsion spring wire only
.192 wire size

Q248

LiftMaster Gear Reducer 40:1 HCT Post 2/99 (K32-50251)

Same as K32-50251

41DJ001A-390

LiftMaster Receiver Logic Board with Plate 390MHz *** No Longer Available

109441.0002

Overhead Complete Limit Switch Assembly JST

Replaces part number 109441.0001
Replacement has 3 limit switches

072017.0001.S

Overhead Travel Nut for RCH

Teflon travel nut

MALED12

LiftMaster LED Barrier Arm 12 ft

The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
Ideal for use with the Mega Arm and Mega Arm Tower

12-10882

LiftMaster Copper Bushing

3/4" x 1" x 5/8"

RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

G71-26438

LiftMaster Timer-to-Close Factory or Field Install

Compatible with models VSL595 BG770 and BG790
Provides an adjustable timer in the operator control circuit which will close the gate automatically after the preset adjustable time interval
May be factory or field installed
Same as 71-26438 G7126438

PRO-HHD-7511R-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Left Hand (PRO HHDR)

3/4 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Electro-Mechanical Control Circuit (non-circuit board model)
3-btn open/stop/close (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation

.......more details

Installation manual Specification sheet

ZT35081029

Firestar Fire Door No. 2 Slat 22-GA White

G658056

LiftMaster Counterweight for BG790 Arm

For 17' gate arm and up
For use with various LiftMaster® Barrier Arm Gate Operators (BG790) and Perimeter Access Solutions.
Also known as: 108056 088056 10-8056 G658056 G088056 10-8056M

S2TR2641E1

Erone 1-Channel Mini Transmitter 433MHz

Open/Close remote for 1 door
Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
Learn button programming
Ergonomic stylish design Rugged & durable
Light grey base with yellow buttons
unobstructed range: 820 ft (250m)

.......more details

Sell Sheet Brochure

29-ABC-15

LiftMaster Fuse 15A

For VSL595 gate operator

LD7LP

LiftMaster 10-30VAC/DC Low Power Loop Detector (50-DSP7LP)

10-30 VAC/DC low power fail-safe loop detector
<2mA stand-by current draw
Compact design - ideal for linear actuator control boxes
Automatic sensitivity and frequency adjustments
Ideal for solar or battery powered gate applications

1104-ASFT-10FT

Elton Aluminum Stiffener for 1104 10ft

Prevents the 1104 from buckling in the hot sun

SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

22 gauge
Max size: 18'4" max std. width 20'4" max std. height
Slate type: Curved
Finishes: Gray White Tan Brown or Galvanized
RAL Powder coat option in 188 colors

CAPACITOR008R

Manaras Capacitor 440-648uf incl. Bleeder Resistor

Used for 3/4 HP 120/230VAC 1 ph motor255 374 & 258
Also for 1 HP 120/230V 1 ph motor350

50150

Doorlec Electro-Mechanical Safety Edge and Weatherstrip Sold per Foot

For the protection of vehicles doors and safety of people.
Any upward-acting door may be fitted at the leading edge with an electro-mechanical safety weatherstrip.
This mechanism consists of a formed galvanized steel section covered with vinyl impregnated rubber hinged along the full width of the leading door edge.
Can be adjusted to approximately 2½" (63.5mm) to form a tight weather seal.
The hinge linkage is arranged that minimum pressure is required to activate the electrical control switch causing door to reverse direction of travel to the fully open position.
Reverse switch is enclosed in a galvanized housing with a sliding plunger to assure positive actuation every time.

.......more details

M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 1" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

For 1/3 HP and 1/2 HP operators only

D525-216-1

Cable Drum Standard Lift 18' 3-SS Torque Force Pair

18' standard Lift aluminum die cast alloy with 3 set screws.
Pair includes: (1) LH and (1) RH.
Color coded: Red=LH and Black=RH
Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
Max. Cable Diameter: 3/16". Mounting: 1" solid shaft with 1/4" keyway
Cross Reference: DM518 DNS 5-18 OMI 2200

.......more details

Q222

LiftMaster Control Board for MIR-1 (K001A5868) ** NLA

For Miracle-One single operator - one arm
Same as K001A5868

BSG12-24LED

Devanco Stop and Go Light Black Housing 12-24V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied

.......more details

Installation Instructions Instructions d'installation Sell Sheet

OGH-6112-ECB

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OHJ-6113-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OPH-6534-ECB

Manaras Opera-H 1 HP 600V 3 Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

SHAFT017

Manaras Spacer for Trolley Tracks

21002

Doorlec Hoist Interlock Switch

780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

3/8" bolt has 9/16" head
Max torque = 22
Full thread
Grade 5

LA500DCS

LiftMaster Secondary 24VDC Actuator Arm for Dual Swing Gate Applications New Model

Includes 40ft cable and junction box

Installation Manual Manuel d'installation Sell Sheet

GH105-L5

LiftMaster Gearhead with Brake 1 HP 575V 3-Phase Logic 5

GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
GH operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

37408

Doorlec Reversing Contactor BF9 120VAC

MWR12

Miller Edge 1-Channel Receiver RF 318 MHz

��The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
Power requirements: 10 to 40 VDC 10-30 VAC
Output: dry relay contact N/O and N/C 1A @60VAC
Operating temperature: -40C to 60C
Maximum operating distance: 100ft
Electrical configuration: optional N/O or N/C

.......more details

Installation Manual Sell Sheet

761

Fasteners Flat Head Carriage Bolt 1/4-20 x 1-7/8" 1000/Box

Full length thread
Max torque = 6

RBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

RBH753L5-LH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

MA021

LiftMaster Nylon Arm Nuts 50/Pkg

For barrier gate models MADCBB MATDCBB MASDCBB & MASTDCBB

MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

Replacement reflector for the CPS-RPEN4 photo-eyes

49563

Stanley Chain Drive Traveler Assembly

Compatible with all Stanley chain drive units from 1982-present
Not compatible with C-Channel models
Assembly includes Traveler 49564 and slider 24851

1010-PER-FOOT

Replacement Sweep for One-Piece Door Grey Vinyl

Fits into the bottom of one-piece 'Stanley' doors.
Sold per foot
2" wide

3001-0

Signal Tube Treadle Hose Black Sold per foot

Applications: for gas stations and apartments
I.D. : 3/8"
Also known as Drive Over Hose.

25-10301

Truck Door Heavy-Duty Cable Anchor Bracket Black for Whiting Roll-Up Doors

Steel construction
Allows proper rotation of cable head
Cross ref: Whiting 5803

11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

Used on slide gate operators using #50 chain.
Also referred to as adjuster bolts

MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

1/2 HP 120 volt 1 phase medium-duty logic trolley operator
Medium-duty logic board with integral 315 MHz radio receiver
CPSU commercial photoeyes included
4L V-Belt #48 drive chain adjustable friction clutch
Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
2 year warranty

.......more details

Installation manual Manuel d'installation Product guide Guide de produit

78LMC

LiftMaster Wall Control Panel

Wired multi-function control panel
Push-button is illuminated for convenience
Includes an adjustable light timer
For use with opener built January 1995+
Has a lock feature to cancel all radio control signals
Also known as: 945CB 41A6318 041A5273‑2 012381463183 41A5273‑14 041A6318

.......more details

Installation Manual Manuel d'Installation

02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

Code on key is #301

VBELTB29

Manaras VBelt 5L 29" Type B (5L320)

For models OPJ OHJ OPH & OSH
Same as 5L320

821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

Enables smartphone control of most major brands of garage door opener with photoeyes.
Includes Wi-Fi hub and door sensor

Installation Manual Manuel d'Installation Sell Sheet Brochure

195LM

LiftMaster Ceiling Mount ***Discontinued***

Designed to fit most standard garages
Black powder-coated finish hides wires and cords for a cleaner look
Mounts parallel or perpendicular to rail
Adjustable height to fit most ceilings
Hangs 6.5 to 24 inches down from ceiling

Installation Manual Manuel d'Installation Sell Sheet Brochure

41B7611

LiftMaster Filter Board w/Screws **to extent of inventory

For model: 8550

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

120/208/240/480V PRIMARY 24V SECONDARY

485LMC

LiftMaster Battery for Integrated BBU Units

For use in Liftmaster 8550 8500W 3850 and 8360 models
12V 4.5 AMP
Same as Part # 41A6357-1 41A5948
Battery back-up good for 20 cycles

Installation Manual Manuel d'Installation

398LMC*

LiftMaster Smart Control Panel - DISCONTINUED

LCD screen displays the time and temperature along with other short messages regarding the status of the garage door opener system
Locks out all remote control radio signals while you are away
Motion detecting capability that automatically turns on the light when it detects movement
Compatiable with all 315 Mhz LiftMaster / Chamberlain garage door openers with Security+ radio
Discontinued 12/31/13 - Replacement options 78LMC or 889LM

Installation manual Manuel d'installation

12562

Doorlec Lower Brake Shoe - Left

Fits on all Doorlec operators equipped with brake shoes
Use with drum #12561

H14G02

Hinge #2 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#2 position
Use between sections 2 and 3
Same as part number 242

.......more details

LIMIT021

Manaras Single Limit Switch with Flat Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

Limit Switch Chart

DOORARM001

Manaras Door Lifting Arm Assembly

Complete door arm assembly for all Manaras trolley operators.

RADIO-27

Manaras MT-1000 1-btn transmitter 313 MHz ** Replaced by RADIO-EM901 or RADIO-EM903

Open/Close remote for 1 door
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
Alternate part number: MN-100TI-A

Programming Instructions

7145.96

Whiting Bottom Seal For Coldsaver 96" long

Aluminum retainer sold separately

2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide
Includes Lock and keeper

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 19683 (set by nine trinary dip switches)
RF frequency: 318 MHz
Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787

.......more details

Programming Instructions

1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4" • DIE # ES18191

25-42-200

Extension Spring 7' Door - 200 lbs Tan

Double - Loop
25" long 42" stretch 200 lb load
Sold individually
Rated for 10000 cycles
Same as part number 120

Spec Sheet

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

Z9003

Pusher Spring - 27" Sold as a Pair

Pusher spring 27" long with 15" travel. Sold as a pair

4X8SC50

Devanco Loop 4' x 8' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels are routed and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.

.......more details

65-7WIRE-L

LiftMaster 7 Conductor Control Wire 500ft

20 AWG
Ideal for wiring CPS-RPEN4 photocells

RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.

Installation Instructions

6X12PO50

Devanco Loop 6' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep