Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Cream
703-004

Eclipse Gel Connectors Red 20-26 AWG 100/Pkg

TLS1CARD

LiftMaster Option Board for L4 L5

  • Works in conjunction with Logic 4 & Logic 5 to provide seven field-selectable modifications
  • Including six door traffic control options
  • A means to connect External Open & Close limits by using a selectable DIP switch
  • Controls both 24V & 110V traffic lights
  • Formally known as RDGRNCARD
Installation Manual
28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

  • Galvanized steel 14 gauge construction
  • Holes drilled to allow for faster plug weld installation to frame
  • For use with 1" rollers
7470.093

Whiting Side Seal for Insulated Doors 93" Long

  • Fits Coldsaver and Tempguard
MWRTA12

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

  • For 2-wire edges
  • Was previously MWRTA02A now has a new board making installation easier
  • Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
  • This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
  • The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.
Installation ManualSell Sheet
BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
ACT-31B

Linear 1-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz (ACP00879)

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
    • .......more details
Programming Instructions
AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
  • Ambient temperature range: -49F to 180F
    • .......more details
Instructions ManualSell Sheet
195LM

LiftMaster Ceiling Mount ***Discontinued***

  • Designed to fit most standard garages
  • Black powder-coated finish hides wires and cords for a cleaner look
  • Mounts parallel or perpendicular to rail
  • Adjustable height to fit most ceilings
  • Hangs 6.5 to 24 inches down from ceiling
Installation ManualManuel d'InstallationSell SheetBrochure
CPS-RPEN4

LiftMaster Monitored Retro-Reflective Photo Eye with Nema 4 Enclosure for Commercial Door Applications

Installation ManualManuel d'InstallationSell Sheet
C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF175
855LM

LiftMaster HomeLink Repeater Kit

  • This kit contains a repeater and a transmitter
  • The HomeLink repeater is only compatible with HomeLink equipped vehicles
Programming Instructions
NX21

Allen Bradley 24V Reversing Contactor

  • Allen Bradley no. 104-C16KJH22-X6
  • Cat no. 100-C16*10
PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

  • Suitable for exterior applications NEMA 4
  • Multi-supply voltage 12-240VDC 24-240VAC
  • LED indication for power supply and target detected
  • Not recommended for carwash applications
  • Operating temperature -25 to +55 C
  • Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3
    • .......more details
Installation Manual
41A5021-9G-315

LiftMaster Circuit Board Assembly

  • Board: Security+ 315 MHz
  • Aeesmbly includes: circuit board and end panel
  • Also includes 1 Multi-Function wall ctrl panel - 2 wire
  • For ATS2113X model
  • For older ATS operators use replacement board 41A5021-1ATS
398LMC*

LiftMaster Smart Control Panel - DISCONTINUED

  • LCD screen displays the time and temperature along with other short messages regarding the status of the garage door opener system
  • Locks out all remote control radio signals while you are away
  • Motion detecting capability that automatically turns on the light when it detects movement
  • Compatiable with all 315 Mhz LiftMaster / Chamberlain garage door openers with Security+ radio
  • Discontinued 12/31/13 - Replacement options 78LMC or 889LM
Installation manualManuel d'installation
881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

  • Push button for garage door operation
  • Motion-detector automatically turns on the light when movement is detected
  • 150 degree sensing angle for motion sensor
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
  • Light run-time is 4 1/2 minutes with adjustable light timer option
    • .......more details
.295_2-5/8"-LH

Torsion Spring .295 x 2-5/8" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
41A5483C

LiftMaster Circuit Board Assembly *** To extent of Inventory

  • Assembly includes: Circuit board end panel and light socket
  • For chain drive units with two lights
  • Fits 2265 2565 7420 PD610 PV612C & PD612K
  • Last letter of the part # indicates revision date
  • Also known as 41A5483 41A5483B
16-5L304

LiftMaster Cogged Vbelt 5L 30.4"

FL-KEYPAD

FL-Allstar Wireless Keypad 110927-311 MHz

  • This wireless keypad controls up to four doors.
  • Manufacturer's model number: (190-110927)
  • Dimensions: 6" x 2 3/8" x 1 1/4".
Programming Instructions
41DJ001

LiftMaster Circuit Board with Plate for 3800 3900 41DJ001B

  • Board: Security+ 315 MHz
  • For jackshaft models; 3800 3800P 3800PLD & 3900
  • Also known as 41DB001-2
Programming InstructionsInstructions de programmation
PRO-LH-5011U-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

  • Brake shoes for all Lynx operators
  • Assembly includes the shoes
  • release spring and bolt included
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) ** No Longer Available

  • Proline / Lynx 455 Plus trolley slide assembly
  • For operators built from 2000 +
SEA433

Erone Tuned Antenna 433MHz

  • Increase reception and/or range
  • 11.5ft (3.5m) coaxial cable (RG 58) included
  • L-Shaped bracket for wall-mounting
RADIO-EM103MD

Manaras 3-btn transmitter configured as 3x single-btn Multiple Doors Rolling Code 390 MHz

  • Open/Close remote for 3 doors
  • LED indicator CR2032 battery and visor clip included
  • Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
Installation Instructions
STATION078

Manaras 3-btn Push-Button Control Station Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
Sell sheet
8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

  • Open/Close remote for 9 doors
  • Compatible Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door trio to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
1336.7

Whiting Stainless Steel Curbside Top Closure Bracket for 8" radius

1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

  • 5" yellow vinyl insert 150ft spool.
PULL-CHAIN

Pull Chain Spring

  • Used with a hand chain for full vertical doors.
  • Eliminates the need for leaf bumpers
1104-14FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 14' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
25-42-80

Extension Spring 7' Door - 80 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 80 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
Z9955

Spring Gauge

  • Ruler style spring gauge
  • Stainless steel
  • Confirms spring ID & wire size
  • Place formed end between 2 coils count 20 coils to obtain wire size
SF200

Spring Fitting 2" Pair

  • Unviversal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding and (1) stationary.
  • Maximum wire size diameter: .3065".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft
  • Winding bar hole 1/2"
    • .......more details
Z9900

Leaf Bumper Spring with bracket Sold as a Pair

  • Leaf spring with bracket and safety strap.
CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

  • Stainless Steel Shaft no bearing design
  • Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
  • Rated for 200 000 cycles
  • Pound Load: 145 lbs
CABLE_364SS-250

Cable 3/64" 7x7 250' Stainless Steel

  • Not for use in aircraft applications
  • Type: T304
SOFT_EDGE-ENDCAP

Devanco Canada Soft Edge End Caps Sold Individually

MP-00039

Micanan High Cycle Mod. for PRO-TTB

  • Modification only
  • For installations that exceed 100 door cycles per day
  • Includes cast iron flanged precision bearings on all shaft and delay on reverse circuit
  • Supplied with #41 chain
BRACKET112

Manaras Wall Mount Stud Bracket

  • This Wall Mount Bracket can be used with all Manaras Wall Mount commercial operators except the MRGH and MGH models
  • Will not work will Trolley Operators
.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
PMT20I

Carlo Gavazzi Through Beam Emitter Side Only

  • PMT series features include immune to ambient light precise detection through narrow beam LED-indication and output function switch selectable.
GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PL-A26-LENS

Lynx Front Light Lens LPL 455+

15-50B32QGH

Sprocket 50B32 1.25 Bore 1/4" w/SS

  • 71-1550B32QGH is a 32 Tooth Sprocket Kit 1-1/4" Bore x 1/4" keyway (50B32-114)
  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
LPEXP

LiftMaster CAPXL Loop Detector Input Board

  • Automatically trigger a phone call to a guard or office when a guest arrives
  • Mounts inside of CAPXL
  • Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
  • Operating Temperature -20°F to 130°F (-29°C to 54°C)
  • Dimensions: 2.8” x 2.3”
15-50B32LGH

Sprocket 50B32 1" shaft 1/4" KW

  • 71-1550B32LGH is a 32 Tooth Sprocket Kit 1" Bore x 1/4" keyway (50B32).
  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

  • 9' Square Arm
  • PVC
  • Red & White Retro-Reflectorized DOT Tape
  • Hardware NOT included
XF600VAC7

LiftMaster 600V Transformer Kit 700

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
TDC7-8

Liftmaster Commercial 8FT Trolley Angle set (10-5808-P) and #48 chain pack (TDC48-08) ***Actual length 131*

  • Double Angle Rails for doors up to 8'6" high
  • Includes #48 chain pack
IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

  • Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
  • Thru beam configuration
  • UL325 compliant
  • Four (4) monitoring interfaces
  • 115 ft. operating range
  • Easy installation and set-up
    • .......more details
6200-2-7-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

  • 2" diameter white nylon tire
  • 6200 sealed precision bearing
  • Zinc plated 7.04" Overall Length 5.96" stem
  • Rating: 100lb; 100000 cycles of a 12′ door
GALV-331-258-144-R

Torsion Spring .331 x 2-5/8" x 12ft RH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
PCBA-PD3.3

Dyna Hoist/Pulse Replacement Drive Board for DC500-100

K07-8007

LiftMaster Arm Hub for BG770/790

  • Also known as: G078007 07-8007 078007
AFB120

LiftMaster Fire Access Box w/Micro Switch & Knox Key Switch Option

  • ll-in-one fire access box
  • Includes: access door with a hole for a standard or fire department padlock interior micro switch knock out for Knox key switch and standard cylinder lock
  • Two options for automatic gate access: 1) micro switch is activated when the padlock is removed and the front panel is opened or 2) via Knox key switch
  • NOTE: fire department padlock and Knox switch NOT provided
RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
  • Includes PHOTO-070
    • .......more details
HA-300

SkyLink Wireless Long Range Alert System Base Unit with 2 Motion Sensors

  • Range of up to 800 feet in an open area
  • 2 in 1 Alert & Alarm Modes
  • Motion sensor detection range of 40 feet
  • Program up to 16 sensors 4 in each zone
  • Expandable system add on various other sensors such as Door/Window sensors Garage Door sensors and Water Alert sensors
  • Kit includes: Receiver (HA-434RL) and 2 Motion Sensors (HA-434TL)
    • .......more details
210-0053

TNR Doors CurtainLok Ass'y Kit UHMW-PE 5/pr per Kit (10pcs) ** Price by Quote Only

  • 5 complete curtainlok's with fasteners
  • Curtain Lok™ for 1/4” thick Rubber Doors
CP-TRF-110-24-20VA

Lynx Transformer 110/24V-20VA

  • Will work with old 455 Automatic Doorman opener
K20-1100B-2LP-H24

LiftMaster Electric Motor 1 HP 115/208-230V 1Ph Logic 5

  • For use with various LiftMaster® Logic 5.0 1-Phase Industrial-Duty Commercial Door Operators
  • Includes wiring harness
41014

Doorlec Emergency Release Spring

  • Attaches to the wall disconnect leverto put the operator in manual mode in case of power failure
VSA-5

Electrical Vehicle Treadle Switch 24VAC 5ft Long Black/Yellow

  • Exterior Electrical Vehicle Treadle Switch
  • 5 Ft Length
  • Device activates bells lights and other devices by exerting force on top
  • In protective housing with ramped edges
  • 24VAC
  • Yellow/Black in colour
    • .......more details
RESET-12A-32V

Doorlec Reset 12A 32V

CHI-FS-7522

CHI Fire Shutter 7522 ** pricing by quote only

  • Door meets 45-minute 90-minute and 3-hour UL ratings with full compliance to NFPA-80 standards.
  • Standard curtain provides a 1 ½” pre-painted hot dipped galvanized steel slats.
  • Smooth quiet drop testing thanks to a durable viscous governor.
  • Simple drop-testing and ability to reset the door which makes for quick operational readiness.
  • Standard bottom bar slide bolt locks with an optional cylinder lock.
  • Slat Thickness: 22 gauge Flat slats
    • .......more details
LRS-LC

EMX Logic Controller

  • For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
  • Connects two stand-alone sensors to expand the detection area
  • Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
  • Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
  • Provides six (6) selectable logic functions and two (2) separate relay outputs
  • A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors
    • .......more details
MH00002

Micanan Mild Steel Bushing 9/32" ID x 13/32" OD x 1-1/16" (Brake Option) *** No Longer Available

K19-4853

LiftMaster Chain #48 x 53 No Master Links

  • Fits the SL595UL gate operators
813LMX

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0

  • Encrypted DIP style three-button remote control with Security+2.0 technology
  • Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
  • Easy to code 12-position DIP switch offers up to 4096 codes
  • May also be programmed for Open/Close/Stop functionality
  • Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
  • Compatible only with Security+ 2.0™ commercial receivers and operators
    • .......more details
Programming instructionsInstructions de programmationProduct Guide
EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

  • The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
  • The cable connects to the antenna base on one end and the receivers F connector on the other.
  • If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
  • Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
    • .......more details
Installation manual
ALUM-554

Aluminum 24" x 100' Spool Chestnut Brown / Brun Marron # 554

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 554
  • Reverse side is #431 Bright White
Colour chart
PC-3

EMX Infrared Modulated Photoeye Thru Beam

  • Thru beam configuration
  • LED alignment indicator simplifies installation
  • No calibration or sensitivity adjustments needed
  • Wide sensing angle for increased reliability
  • 30 ft. operating range
  • Housing: Black PVC * Not water tight
    • .......more details
K94-37694-2

LiftMaster Electric Motor 1 HP for SL585U(L)

  • Replacement motor for SL585101U
ALUM-322

Aluminum 24" x 100' Spool Red # 322

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 322
  • Reverse side is #431 Bright White
Colour chart
CP-BR-ASSY-115V

Lynx Brake Kit with 115V Solenoid CDJH

  • Complete brake kit with solenoid
FLOX2R/A

NICE Wireless Universal Digital Receiver 2-Channel 433 Mhz

  • Features step-by-step timer and anti-burglar functions.
  • Works with all standard gate operators.
  • Management of multi-user system through the unique personal code.
  • Uses BM250 memory which holds 255 codes.
  • Reception frequency : 433.92 MHz
  • Power input : 24V or 12V ac/dc ± 10%
    • .......more details
MA020

LiftMaster Mega Arm Replacement Cover

  • MA-020 is a Mega Arm Replacement Cover.
  • Compatible with LiftMaster® Mega Series (MA/MAS) Commercial Gate Operators ONLY
85503

LiftMaster Belt Drive DC Battery Backup Wi-Fi W/Camera

  • Integrated Camera. Camera manually adjust 360 degrees to see everything that happens in the garage
  • HD-Quality Video. Glare-resistant night vision lens auto-adjusts to light levels in the garage to capture everything and anything that passes through the garage
  • Live Streaming and Video Storage. View a live-stream of your garage for free. 7-day and 30-day video storage options are available via a monthly subscription.
  • 2-Way Audio. Communicate in real time between your garage and your smartphone
  • MyQ Technology now with Wi-Fi® enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
  • DC Motor Belt System delivers powerful ultra-quiet performance.
    • .......more details
K20-3075B-4P-H24

LiftMaster Electric Motor 3/4 HP 230/240V 3P L5

  • This is a replacement Motor Kit (3/4 HP 230/460V 3PH L5).
  • Compatible with various LiftMaster® Logic 5.0 Standard-Duty Belt Commercial Door Operators
77

Whiting Steel Outside Cam Lock Black Standard

LMPC2-ST

LiftMaster HID ProxCard II 1326 26 Bit Clamshell Card Price Per Card

  • HID 26 Bit Format
  • 125 kHz
  • Sold in Lots of 100 - Price Shown is Price per Card
  • Only compatible with PPLX in stand-alone mode
  • Please supply Start # and Facility Code # when ordering
  • Dimensions: 2.135" x 3.385" x 0.075" MAX. (5.4 x 8.6 x 0.19 cm)
    • .......more details
DDO8900W

LiftMaster Light Duty Commercial Dock Door Jackshaft Op.

  • Ideal for commercial applications that require full vertical lift sectional doors with light-duty cycle requirements
  • Works with myQ® Business™ Facility to analyze and optimize productivity with intuitive control and monitoring capabilities.
  • LMi5 Interface monitors up to 5 external sensors enabling the DOCK DOOR SESSIONS feature in myQ business facility and visualization of productivity at the dock.
  • MyQ® Technology enables monitoring and control of the facility operators through a mobile app.
  • Built-In Wi-Fi® for simple operator internet connection.
  • Opens 50% faster in the up direction.
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
IS40-XL

BEA Industrial Sensor Low Mount Dual Technology Presence Detection BEA-10IS40XL

  • Dual technology sensor combining presence and motion detection in industrial applications.
  • Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
  • Up to 7 minimum object targets
  • Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
  • Mounting height: 6.5ft - 11.5ft
  • NEMA 4
    • .......more details
Installation manualSell sheetCut sheet
WGEC24-75WR

Anixter Outdoor Horn/Strobe 24VDC Fixed 75 Candela Wall Mount

  • This is a non-cancellable & non-returnable product
  • Features superslide bracket ease of supervision testing
  • Checkmate instant voltage verification
  • Prewire entire system: install mounting bracket then install signal
  • Switch selection for High or Low dBA
  • Switch for mechanical & 2400Hz tone
    • .......more details
CPT-223-K5

Miller Edge Non-Monitored End Plug Kit

  • For use with the CPT-223-50 bulk extrusion
  • Kit includes: 5 wired 5 Non-Monitored end plugs and 5 1/8oz tube of vinyl adhesive
  • One kit is enough to make 5 non-monitored edges
RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

  • For Commercial/Industrial Garage Door Applications
  • Wall Mount
  • DIP Switch and Rolling Code Technology
  • Sixteen (16) Fixed Codes / Receiver
  • 313 MHz & 390MHz Radio Frequency
  • Controls One (1) Door
    • .......more details
Programming instructions
CAP378

Capacitor 110/125VAC 378-454MFD

  • 378-454 mF 125 VAC 50/60 Hz
  • Used on 1/2 HP LiftMaster operators
3055

End Stile Keyed L-Handle With Locking Cylinder and 7-1/2" Latch Mechanism

CP-PU-DRV-58-8

Lynx Drive Pulley 5/8" x 8" 4L MR TC3 Open/Spoke Style for Trolley Ops

ST101-BTM-WHITE

Lynx Bottom Panel White 10x24

  • Includes bottom PVC
TTC-1

Timer to Close Module 14-Pin

  • Works on LYNX-6000 board
MA012

LiftMaster Cam Arm with Magnet

  • Cam Arm for Liftmaster Mega Arm gate op.
SL595101UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 115/208/230V 1 Phase - Heater NOT Incl. Reflective photocell LMRRUL included

  • Power: 115/208/230 VAC. Single Phase.
  • Accessory power: 24VAC 500mA max.
  • Monitored safety inputs: 3 Main Board 3 Expansion Board.
  • Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
  • Gate travel speed: 12 in. per second.
  • Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).
    • .......more details
Installation manualManuel d'installationFirst step for installationPremière étape pour l'installationSell sheetWiring diagramWiring diagram 575V
SL595203UL

LiftMaster Dual Voltage Slide Gate Op.2 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325

  • UL 325 compliant system.
  • Power: 208/230/460/575 VAC. 3 Phase.
  • Accessory power: 24VAC 500mA max.
  • Monitored safety inputs: 3 Main Board 3 Expansion Board.
  • Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
  • Gate travel speed: 12 in. per second.
    • .......more details
Installation manualManuel d'installationFirst step for installationPremière étape pour l'installationSell sheetWiring diagramWiring diagram 575V