Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Garage Door
SPECIALPANEL001

Manaras Complete C-Box Special Order

  • Includes limit system limit shaft.
21-7115-1

LiftMaster Transformer 115/230V 1Ph

745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

  • Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
  • Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
  • 4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC
20001

Doorlec Brake Spring

  • Fits LJ/LJH
OSH-6113-CONT-L

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation manualSell sheet
17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

  • Same as G172701
MD00044

Micanan Spur Gear 12B60

CONTACTOR003

Manaras Repl. Kit Reversing Contactor Allen Bradley 16A-24VAC

Drawing
104255

Allstar Clip only for 8833TC

  • Clip only
8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

  • An original Whiting assembly
ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

K72-33873

LiftMaster Output Shaft Kit MT / BMT

  • Complete kit includes output shaft bearings sprockets chain roll pin and turac
.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
PRO-H-FRAME

Micanan Frame for PRO-H

RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

  • Wireless for easy installation anywhere
  • Controls door open-close light on-off
  • Programmable pet opening (Opens to a pre-selected height of 6"-30")
  • Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
  • 10-second closing safety delay
  • Transmitter program button
    • .......more details
Programming InstructionsCompatibility chart
CP-LX740

Lynx 3-btn Transmitter 372 MHz for Commercial Op. with UL325 Board

  • UL325
  • Works on the new Lynx commercial operators
  • For 3 doors
  • Not compatible with the new 372HMz residential operators
Compatibility chart
LVB420-11

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
60-2728

AB 42GRU-9001 Retro-Reflective Photocell Exterior

  • Voltage: 12VDC/24VAC/DC
  • Sensing Distance: 30 Feet
  • Comes with Bracket and Reflector
  • NEMA 3 4 4X 6P 12 & 13
  • Allen Bradley
K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

  • Service kit to connect new LED arm to existing barrier gate
  • Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply
PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

  • Retro-Reflective
  • 24Vac 30' range
  • Includes 3" reflector
10-3209_GATE_BRKT

LiftMaster Gate Bracket

  • Fits SL580GL SL595GL and new IHSL24UL INSL24UL models
MALED12

LiftMaster LED Barrier Arm 12 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
MDT-4B

Linear 5-Channel Visor Transmitter MegaCode Block Coded 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
  • Sold in lots of 10
    • .......more details
Programming instructions
K72-33841

LiftMaster Shaft-Sprocket Assembly Clutch MH

  • Kit includes: Compression spring Cotter pins and Bearing
H105L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Left Hand W/Brake

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
H101L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Left Hand W/Brake ***No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
H101L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Right Hand W/Brake ***No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
.363-6-L

Cut-to-Length Torsion Spring .362 x 6" Left Hand Wound Green/White

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
GD-LITE-1224134

Lynx Thermo Window 12" x 24" x 1-3/4"

DXT-21

Linear 2-Btn 1-Channel Handheld Transmitter 315 MHz *** Discontinued

  • A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required
  • Powered by two 3-Volt #2032 lithium batteries included
    • .......more details
Installation Manual
SPF514-6

Spring Filler 12 ft Long No Fins

  • For use with 5-1/4" or 6" torsion springs
  • Accomodates both 1" and 1-1/4" shaft size
CPT210-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

  • Used on CPT-210 extrusion
D6375-164-125

Cable Drum High Lift 164" 1-1/4" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
BIG-METRO-1PKG

NICE Big-Metro Single Arm Kit

  • For swing gates with leaves up to 5 m
  • Underground installation.
  • BM5024 Motor: Irreversible 24 Vdc with magnetic encoder complete with connecting lever and mechanical stop for the closing manoeuvre.
  • Compatible with 2 foundation metro boxes externally chamfered with mechanical stop on opening: in stainless steel (BMBOXI) ideal for use in extreme conditions and with the new cataphoresis paint finish (BMBOX) highly resistant to corrosion.
  • Maximum freedom of choice: release from inside or outside two key or lever operated models freely combinable and easy to operate with just one hand.
  • Recommended control unit: Moonclever MC824H Features: Simple programming by means of a single key;
    • .......more details
PB-BE102BP

Contact Block N/C Contact Plastic Enclosure

  • Base mount
BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • 02-102 Open/Close Push Button Included
Installation ManualSell Sheet
RS10295

Roller 2" Steel 9-1/2" stem 10 ball Hurricane Roller

  • High strength steel roller designed for hurricane applications
  • Wheel Diameter: 2"
  • Steel tire Stem made from alloy steel
  • Rated: 15000 cycles for a 12'h door
  • Load rating: 75 lb
  • Box qty: 100 Box weight: 62 lbs (2-9-1/2-10 steel)
    • .......more details
PRO-HHD-7511R-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Left Hand (PRO HHDR)

  • 3/4 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation manualSpecification sheet
157370

Decorative Lift Handle Yorktown Style 8-3/4" Stamped Steel Sold per piece

  • Black Stamped Steel
  • Also known as Spade Style
  • Mounting hardware sold separately
  • Priced per each
26-40410

Truck Door T-Style Standard Side Seal 116"

  • Extruded from long lasting rubber
  • Seal protects cargo area from dirt and moisture
  • Used with standard J channel vertical angle with 1" track
  • Length: 116"
  • Cross reference: T #69840 W #4019 620200
41A5021-1M-315

LiftMaster Receiver Logic Board with Purple Learn Button *** Discontinued

  • For LiftMaster models: 1345 1346 1355 and 1356
  • For Chamberlain models: CG40D & CG42D
  • Replaces Reciever Logic Boards: 41A5021-1H-315 41A5021-4M-315 41A6135-1A 41A6148-1 and 41A6148-1A
OPH-6112-CONT-L

Manaras Opera-H 1/2HP 120V 1Ph with Mechanical Contactor Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
14-1004

PVC Roll 8" x .080 Standard Clear Smooth 300' for Replacement Strip Curtain

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

  • Galvanized cable 1/8" 7x7 500ft spool.
  • A higher quality cable than the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
.295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.295-134-R

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
DXR-701

Linear 1-Channel Digital Receiver 315 MHz

  • A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
  • When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
  • The relay has four optional output configurations.
  • 32 transmitter capacity
  • RF activity indicator
  • Quick-learn programming
    • .......more details
Installation Manual
105104

Linear Gate Safety Edge Transmitter

  • 105104 is for adding obstacle sensing for motorized gates or barrier arms.
  • Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
  • The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
  • Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
  • Activates receiver for stop or reverse entrapment
  • No cables or coiled wires
    • .......more details
Installation Manual
29-ABC-15

LiftMaster Fuse 15A

  • For VSL595 gate operator
1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

  • Prevents the 1104 from buckling in the hot sun
1104-ASFT-24FT

Elton Aluminum Stiffener for 1104 24ft

  • Prevents the 1104 from buckling in the hot sun
MV-00024

Micanan 4-Door O/C/S Transmitter CT-4 313 MHz ** Discontinued

Programming Instructions
HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
Sell Sheet
2376.162_18.750

Whiting Torsion assembly .162 wire size 18" spring length 75" shaft

MD-00030

Roller Chain #40 10' per Pack

22-460

Brake Solenoid 440-460V

  • Used on all brands of commercial door and gate operators
  • same as MK-00028
CAPACITOR008R

Manaras Capacitor 440-648uf incl. Bleeder Resistor

  • Used for 3/4 HP 120/230VAC 1 ph motor255 374 & 258
  • Also for 1 HP 120/230V 1 ph motor350
MK00108

Micanan Telemecanique Contactor 24V for Logic Board with Contactor Interface

  • LC2K1210B7 mini contactor
MO00001

Micanan Cam Plate Compression Spring (.178 ID)

  • 2 required per operator
  • .178 ID x 032G x 55L)
MH00009

Micanan Flange Bearing 1" ID x 2" OD

  • 2 required per operator
K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

  • Secondary Arm Only for LA400
  • All new arms are backwards compatible with the previous model but the LiftMaster branding is different
Installation ManualManuel d'InstallationSell Sheet
50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

  • Five feet long.
  • OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
  • The weight of the vehicle compresses an electric switch which sends an open signal to the door.
  • Requires a 2-wire connection to the operator but does not require power to function
PEDALU42-HOOD

Aluminum Hood Only No Post for PEDALU42

  • Hood only No post
  • High quality aluminum
  • Boitier pied estau seulement en aluminum
Shop drawing
M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 1" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
MK-00004

Micanan Travel Limit Switch

GH4416-03-L

Green Hinge #3 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-04-R

Green Hinge #4 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
K001A6039

LiftMaster Control Board for LA400

  • Replaces P/N 127A0071C PN 127A0071F
Installation Manual
DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
156871

Decorative Hinge Yorktown Style 16" Stamped Steel sold per piece

  • 16" hinge strap only
  • Black stamped steel
  • Mounting hardware sold separately
  • Sold per piece
Z9965

Bearing Blaster

  • Fast and easy way to remove and re-seat bearings into bearing plates
  • Works for both 1" and 1-1/4" bearings
  • Instructions included
Instructions
H12G02-SS

Hinge #2 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
DWGK11

Bircher Air-Wave Switch DW40 with N4 Enclosure

  • Bircher pressure wave switch with connection terminals
  • 6.3mm plug tab in impact-resistant plastic housing
  • For pressure wave switch series D1 grey housing bottom.
  • A pressure wave generated by pressing the sensing edge reaches the pressure wave switch.
  • The membrane deflects and the electric contact switches.
  • The electric contact remains switched as long as the input pressure is above the response pressure.
    • .......more details
Manual
16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

  • Double Angle Rails for doors up to 16' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 18' 11"
K20-1100C-2TLP

LiftMaster Electric Motor 1 HP 115/230V 1Ph TEFC Logic

EP2989

Exhaust Port 5" with latch long barrel ** Discontinued **

  • 5" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
BRAKE013

Manaras Band Brake Assembly Kit OSH

Installation Manual
8030196

Marantec Belt Connector Kit

  • Works for all Marantec Belt Drive Openers
  • For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
  • Includes two connector pieces and four screws
  • Not for use on the heavy duty rails used by Q7900 & M4900e
9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 17' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
SL532-ZP-COPPER

Zinc Plated Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST532COP. Stops are not zinc plated
5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

  • Activates two devices
  • Wire lead antenna
  • 12 and 24 Volt models
  • Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
  • The receiver can be activated by any of the Delta-3 format transmitters
  • Mounting bracket supplied
    • .......more details
Installation Manual
1224-1-3/4"-WHT

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
1224-1-3/4"-BLK

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 Black Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
11-10987

LiftMaster Clutch Shaft for MH

K72-12493

LiftMaster Limit Switch Kit

  • Complete kit with limit nut retainer switch plates backup plate depress plate limit switches (3) standoffs screws and locknuts
  • For logic control MT BMT MJ MH MHS
41D7924-1

LiftMaster Extra Door Sensor for 821LM First Generation **to extent of inventory

  • Liftmaster Chamberlain 041D7924-1
  • Required to add a second garage door opener to your 821LM MyQ Garage.
  • Works on the Liftmaster 821LM and Chamberlain MYQ-G0201
  • Compatible with:
  • Green Learn Button (Billion Code 390MHZ)
  • Models: 1245 12551270 1280
    • .......more details
PRO-LH-5021U-RH

Micanan 1/2HP 230V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (PRO LHE)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

  • Jack Shaft Mounting plastic guide 4.5:1 reduction
  • Gear drive
  • Fits 3-3/8" minimum offset
  • Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
  • 1 chain keeper
  • 2 shaft collars
    • .......more details
Sell sheet
17K

Rolling Steel 2" Flat Continuous Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
2JW-D064

Rolling Steel 2" Curved Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
AC9

Felco C9 Cable Cutter 1/4" Capacity

  • Tool length: 13"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 9mm / 0.35in
    • .......more details
Data sheet
340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer to specify exact length
6X10PO50-RIGID

Devanco Loop 6' x 10' Rigid PVC pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles