Devanco Canada - Get The Right Garage Door Opener‎ and Parts

P294-K

Heddolf 4-Wire Single Channel Receiver with F-Connector 318 MHz

Controls one gate or garage door.
318MHz
12 or 24VAC or VDC
9 three position dipswitches (+/0/-) •Switchable relay for pulse to continuous
5 wires: 2 for power 3 for relay contacts
Coax antenna not included. Please see MK-00719 86LM.

CR-2154

Raynor Replacement Photocells *** Discontinued

The original PEC-R3 Sensors manufactured by Raynor are no longer available.
The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
Includes both the Emitter and Receiver sensors
Includes new sensor mounting brackets. Wires are not included.
These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
The new CR-2154 Sensors require new mounting brackets (included) to be installed

.......more details

SAG-M

Siren Activated Gate Sensor Formally SOS Sensor

New and Improved Siren Operated Sensor SOS.
Allows Entry of Emergency Vehicles through Gates
The Siren Activates Gate Opener while all other sounds are rejected
Comes with a 4 x 5 Inch Reflective Sign
12-24VAC/DC
Emergency responders use the YELP signal to activate the gate

.......more details

Z9965

Bearing Blaster

Fast and easy way to remove and re-seat bearings into bearing plates
Works for both 1" and 1-1/4" bearings
Instructions included

Instructions

49563

Stanley Chain Drive Traveler Assembly

Compatible with all Stanley chain drive units from 1982-present
Not compatible with C-Channel models
Assembly includes Traveler 49564 and slider 24851

891LM

LiftMaster 1-btn Transmitter Sec+ 2.0

Controls a single garage door opener or gate operator or MyQ® enabled light accessory
Equipped with Security+2.0™ rolling code technology that virtually eliminates radio wave interference
3V lithium battery included
Compatible only with Security+2.0™ LiftMaster® garage door openers or gate operators
Equivalent to Chamberlain's 950ESTD

Programming Instructions Instructions de programmation

828LM

LiftMaster Internet Gateway Sec+ 2.0

Monitor and control your garage door opener from anywhere in the world right from your smartphone or computer
Easy and fast installation through your in home router.
Only works with new MyQ compatible Garage door openers
Controls up to 16 garage doors gate operators or MyQ-Enabled devices.

Programming Instructions Instructions de programmation Sell Sheet Brochure

STATION079

Manaras 3-btn Push-Button Control Station with Key Lock-Out Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.
Schneider Elect. part no. XALD04H7

Connection instructions

DR

Linear 1-Ch DR3A Delta3 Receiver 310 MHz

310 MHz frequency 8 dip switches for coding 256 possible codes
24V AC/DC input power 3 terminal connection
Activates one device
Dimensions: 5.5" W x 4" H x 1.25" D
Same as: DNR00001

Installation Manual

1016

Storm Shield Sold per Foot with 1 caulk tube of adhesive per 20ft

Installed underneath garage door to prevent water from flowing into garage.
Can be driven over with vehicle
Color: Black
Width: 3-3/16" Thickness: 0.5" (highest point)
Comes with 6 x 10.3oz caulk tubes per 100'

Installation Instructions

7001-18-WHITE

Commercial Side & Top Weather-Strip 18' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

TDC12S1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 20 Cycles/Hr 1200LB

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

TDC_Installation-manual TDC_Manuel-installation Data sheet Fiche technique Quick connect guide Guide de connexion rapide Ordering guide

CHAINTENSDC

LiftMaster Chain Tensioner MAXUM DC

For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.

AUXREL

LiftMaster Auxiliary Relay Board MAXUM TDC

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

CGH205L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

GALV-207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Galvanized Brown Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

OPH-6112-M-N1-LH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

ZAP-8825-3

Zap 8825 Series-3 1HP 115V Medium Duty Jackshaft Op

Compatible door sizes: Up to 240 sq. ft./1200 lbs.
Contains the motor two pulleys & one belt
Requires 7” side clearance & 3 ½” clearance above center spring shaft
Features include auto close timer cycle counter and service due reminder
Auxiliary capabilities include interior/exterior lighting wall controls swipe card devices dock equipment motion sensors alarm systems & more
Simple installation of motor assembly to spring shaft

.......more details

GH-353-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 575V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

Z9963

Donkey Cone Torsion Spring Winding Tool

Converts a standard 4 hole (90°option) winding cone to an 8 hole (45° option) which is especially helpful in low headroom situations
Donkey Cone is a two-piece coupler that securely attaches to a standard 1-3/4” or 2” cone with two fasteners
Made from 60/61 heavy duty aluminum

RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

Installation manual Spec sheet

35800

Doorlec Rubber C.I Packing 1/16" x 10" Wide Sold per Foot

Low temperature rubber
Replaces existing worn or cracked MRSB rubber
10" wide to suit most applications
Sold per foot

S505AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 5ft

Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
Fast easy to install mounts vertically or horizontally
Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs

Installation manual

SL585101UL

LiftMaster Industrial Slide Gate Op. 1 HP 115/230/208V 1 Ph Heater NOT Incl.

SL585UL features a heavy- duty industrial lockable metal cover.
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
Manual Disconnect when unlocked allows gate to be operated manually.
Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
Automatic Solenoid Brake prevents the gate from being back driven.

.......more details

Installation Manual Manuel installation Brochure Sell sheet

TRACK-1458-SS

Track Bolt Stainless Steel 1/4" x 5/8"

MSC330V53-BULK

Motor Start Capacitor 330V 53-64MF

MX00034-575V

Micanan Brake Assembly for PRO-HHD with 575V Solenoid (MX00206-575)

Complete brake assembly including 575V solenoid - solenoid cover sold separately part #MM00011

ANGLE-13G-2X2

Perforated Angle 2" x 2" x 10 ft 13 g

All holes No slots
Hole size: 7/16"

CF-101-14

Commercial Side & Top Weather-Strip 14' Long Aluminum / Vinyl

Same as Garaga CF101

K72-12509

LiftMaster Output Shaft Kit (3/4 & 1 HP)

For commercial operator model T
Complete with: Output Shaft Bearing Roller Chain with Master Link Limit Chain Shim Washers Roll Pins Push Ring 3/4' and Sprockets (41B32 & 48B10)

02-103L

LiftMaster Push Button Station 3-btn Surface Mount O/C/S Nema 1 with Maintenance Alert LED

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Works with Liftmaster MH commercial operator
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

.......more details

SPRING-SQUARE-W

Torsion Spring Square Wire Custom Order

Custom spring made to order

CR-2

Battery CR2 3V Photo Lithium Battery

Camelion brand

757-325

Fasteners Lag Screw Hex Washer Regular Profile 5/16" x 1-5/8" 325/Bag KH

7/16" head
Ideal for fastening tracks to the wall

TS150

Wayne Dalton Thermospan 150 Steel Panel

Polyurethane insulation R-Value*=14.16
Max Width 26’2”
1-3/8” Section Thickness
Patented roll-formed integral struts for rigidity
Stucco embossed exterior with pinstriping

CSW24UL

LiftMaster 24VDC High Traffic Commercial Swing Operator

24VDC swing gate operator with battery backup
Heater NOT included. Heater sold separately # HTR
Continuous-duty motor with soft start/stop
Receiver holds up to 50 remotes
Power: 115V or 220V Single Phase
Built-in surge protection

.......more details

Installation Manual Sell sheet Brochure Site plan

K001D8395

LiftMaster Logic 5 Board Kit - all voltages L5

The K001D8395 is a 1 Phase and 3 Phase L5 logic board replacement kit.
This kit is compatible with LiftMaster® 3 Phase Commercial Door Operators manufactured after April 2016 only.
This L5 logic board is Current Sense compatible.
All 3 Phase operators made after April 2016 will require this board.
For 3 Phase operators that require the Current Sense Harness use part number K21-38158

Product bulletin

WINDOW-21X13

Garaga Clear Thermo 21 x 13 White Frame 1-3/4" **** USE CODE G-21x13-134-W

4690-040

Plate Mount Isolator

Vibration and noise isolator
Failsafe design prevents the bolt from falling should the rubber break
Reduces noise transfer from opener to building
Universal design allows for easy installation
Accepts 3/8” bolt

Specifications

BOARD066R

Manaras Replacement Power Board

Used on all Manaras circuit board type operators

Installation Manual Manuel d'installation Replacement Chart Guide de remplacement

CHAINKEEPER001

Manaras Chain Keeper for Hand Chain

OSH-6534-ECB

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

41A6388

LiftMaster Split Coupling (41B6299 / 41D8615)

Same as # 41B6299 and 41D8615
Compatible with all Liftmaster 3800 3900 & 8500 Residential and Commercial Jackshaft Operators.
Door shaft collar RJO

RBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

RBH753L5-RH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

41D7742-7

LiftMaster Travel Module

Fits models 8165 8355 & 8155W

190LM

LiftMaster Adjustable Door Bracket 30/box ** No Longer Available **

This versatile product is designed to help lift garage doors in a wide range of sizes and is available to order in bulk packaging.
With 30 brackets in one low-priced box this product offers a cost-effective solution for dealers who want all their garage door solutions in one single order.
Bulk case of 30 brackets
Adjustable for 18" - 24" door sections
Painted finish - white powder

CPS

LiftMaster Commercial Protector System Eyes

Universal commercial photo-eye kit for indoor use
Interface box allows CPS to work with all operators
24 volt AC/DC supply voltage
Mounting hardware included
Sensing distance of 30 feet
Receiving Eye - A: 001D6857-1 Sending Eye - A: 001D6857-2

.......more details

Installation Manual

02-103

Push Button Station 3-btn Surface Mount Metal Housing

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

Commercial Open/Stop/Close receiver for one door.
If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
It is easy to set with its learn feature (no coding switch).
This receiver can accept up to 8 different operational codes.
Manufacturer's model number: 190-110554
Dimensions: 6 1/4" x 3 5/8" x 1 3/4"

.......more details

Programming Instructions

A01

Lynx Proline Drive Shaft Assembly with Helical Gear

Assembly includes the output shaft and nylon gear

LYNX-RCVR-OCS

Lynx O/C/S Receiver

For use with Lynx o/c/s transmitter # T3B-OCS

Compatibility chart

R5110

Bearing 1" Commercial

1" inside diameter 2" outside diameter
1" steel bearing allows the shaft to rotate securely on a garage door assembly
Same as part number 235
C16-32F*4

971LMC

LiftMaster 1-btn Security+ Transmitter 390MHz

390 MHz Security+ single button visor remote
Compatible with Security+ systems with Amber learn button including Chamberlain Sears Craftsman and Raynor code rolling residential openers (Safety Signal) manuifactured 1997-2005
Visor clip and Lithium battery included (part #CR2032)
Same as 971LM 91LM 950CB 950CD

Programming Instructions

37030A

Genie Motor Assembly DC

Works with Genie ReliaG 800 2022 2024 and 2042
Replacement powerhead motor assembly

837LM

LiftMaster MyQ Smart LED Garage Light Sec+ 2.0

1000 Lumens of LED illumination provide a bright maintenance-free glow.
Unique compact design allows for placement where you need it.
Easy to Install. Conveniently plugs into a standard outlet and mounts on the wall or ceiling.
Control and schedule your LED light from anywhere with the myQ app. Requires a LiftMaster® or Chamberlain® garage door opener with myQ technology Smart Garage® Control or myQ Internet Gateway.
Acts as a garage door opener light (works with Alert-to-Close and Motion Control) when paired to your garage door opener.
Turn lights on and off with the myQ App or your garage remote.

.......more details

2200-294

Linear Plate Sprocket 41A36 1" Bore

811LMX

LiftMaster 1-btn Dip-Style Transmitter Sec+ 2.0 Backward Compatible

LiftMaster Programmable DIP single-button remote control.
Programmable to be: Encrypted DIP Security+2.0 (811LM) - Default 315 MHz DIP (361LM) 390 MHz DIP (61LM)
Ideal for applications such as gated communities or commercial applications requiring a large number of remote controls for a common entrance.
Compatible for cloning with 892LT & 894LT Learning Remote Controls.
Easy to program to previous technology.
Battery: CR2032 •

.......more details

Programming instructions Instructions de programmation Product guide

STD-SS-MINI

Janus Mini Storage Latch Stainless Steel

Standard Stainless Steel latch

K94-37694-3

LiftMaster Electric Motor SL585U 1.5 HP

Replacement motor for SL585151U

BK438/PR-USA

End Bearing Plate Flanged 11-GA 4-3/8" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing
EBF438- USA Style

Z9003-QUIET

Pusher Spring - 27" w/Sleeve 3" Tip Sold as a Pair

Quiet pusher spring 27" long with a large 3" tip and PVC sleeve over tube
11lbs of initial pushing strength per spring+ 3lbs per inch per spring
Sold as a pair. Pair includes 1 LH 226841 and 1 RH 226842

RADIO-RE901

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver

For Commercial/Industrial Garage Door Applications
Wall Mount
DIP Switch and Rolling Code Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz Radio Frequency
Controls One (1) Door

.......more details

Programming instructions Sell sheet

ACP00942

Linear Control Board for Telephone Entry System AE-100

Board only for AE-100 telephone entry system

WS-BOT-PVC2-09

PVC Bottom L-Retainer and 3" Rubber 9ft Long

Black PVC

MLC-K72

Miller Edge Light Curtain Monitored 6ft Pulsed

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing
Operating temperature: -40F to 140F

.......more details

Installation manual Sell sheet

883LMW

LiftMaster Door Control Bell Button Wi-Fi

Controls garage door operation and garage door opener lights
On-board programming capability makes it easy to program remote controls and MyQ® enabled accessories
Compatible only with Security+2.0™ LiftMaster® garage door openers enabled by MyQ® technology
Note: If your door control has an image of a light bulb above the light button with 3 wavy lines above it the door control is capable of placing a Wi-Fi Garage Door Opener into Wi-Fi Learn mode.

827LM

LiftMaster MyQ Remote LED Light Sec+ 2.0 *** To Extent of Inventory

Easily mounts on ceiling or wall within 6 feet of a 120V electrical outlet.
Can be programmed to turn on and off at certain times through the MyQ App.
LED bulbs require no maintenance.
1500 lumens – about 50% brighter than many standard LED lights ensures the garage is always bright.
Programmable to work with any MyQ – connected garage door opener Security+ 2.0® garage door remote control/control panel or smartphone.
Compatible with remote models: 374UT 375UT 892LT 894LT 891LM 893LM 890MAX and 893MAX

.......more details

25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
Vehicle is now ready for roll-up door installation
Corner post has added lip length to allow easier weld during installation
Steel construction .125 thick
Each bulk kit includes two (2) corner posts and one (1) header
Plain finish

.......more details

PRO-APTB-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

TOP-BK-PCG

Powdercoated Commercial Top Bracket Adjustable 1-Bolt Grey

Powdercoated Grey
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

F310

Linear GTO Digital Keypad (Wired or Wireless)

As a wired keypad it can operate garage door openers and gate openers that require 24 volts or less and accept normally open contacts.
As a wireless keypad it can be used with any gate or garage door opener that receives a 318 MHz RF signal.
The keypad must be used in conjunction with the GTO garage door receiver kit (part # RB709) on any other garage door.
You may program up to 25 different personal entry codes allowing you to give different entry codes to different users
After entering a valid code pressing any key while the gate is opening will stop the gate; pressing any key while the gate is stopped and the gate will reverse direction.
The keypad will not affect the auto-close setting of your gate opener system.

.......more details

BEA-10-FALCN-XL

BEA Falcon-XL Motion Detector Mount under 11'5"

Same features as the Falcon detector but made specifically for extra low mounting
Mounting height between 6.5' and 11.5'
Detection zone: 13'x6.5' at 8 1/5'
Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor.
Sensor also has the ability to differentiate between pedstrians and vehicles.
Available remote makes it easy to make adjustments to all key parameters of the sensor while at ground level.

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

838

Skylink Transmitter / Receiver Set Rolling Code ***NLA

Generates new code each time you push the button these codes never to be repeated.
99.99% works with most brands of garage door openers.
Ideal replacement for older or obsolete models.
Electronic scanners "code grabber" cannot duplicate the operating code.
Easy to install & program.
Works as a secondary receiver (both original existing receiver and 838 receiver will work simultaneously).

.......more details

8355W

LiftMaster Premium 1/2HP AC Belt Drive Wi-Fi

Free MyQ® Mobile App so users know their home is secure.
Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitors and Controls the opener from anywhere using mobile devices.
Belt Drive system for quiet maintenance-free performance.
Motor Vibration Isolation System (MVIS®) provides quiet reliable operation.

.......more details

Installation manual Sell sheet Brochure

CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** NLA

Replaces the 4 wire AO Smith electric motor

GL-24-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 24-3/8" long Sold Individually

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
24 LEDs per guide light

.......more details

IRB-RX

EMX Industries Receiver Board Only for IRB-4X

CPS3CARD

LiftMaster Option Card Only (41K0811)

Works with all commercial Logic versions L2 L3 L4 L5
Use with CPS-U to add a second set of eyes to the operator
Allows activation of Timer-To-Close without CPS-U
Simply plugs into Logic board
Cut resistors on JU1 & R16 to activate timer feature
Same as 041K0811

.......more details

PS324

Nice Battery Backup

Kit of 24 V batteries complete with battery charger for powering automations for automatic gates and doors in the event of a mains power failure
Ambient Operating Temperature: from - 20 to + 55°C (battery efficiency is reduced in proportion to a decrease in temperature at -10°C efficiency is 30%; the battery lifetime decreases on an increase in temperature; at 40°C lifetime may be reduced to 2 years)

DXT-21

Linear 2-Btn 1-Channel Handheld Transmitter 315 MHz *** Discontinued

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

Installation Manual

G71-26438

LiftMaster Timer-to-Close Factory or Field Install

Compatible with models VSL595 BG770 and BG790
Provides an adjustable timer in the operator control circuit which will close the gate automatically after the preset adjustable time interval
May be factory or field installed
Same as 71-26438 G7126438

JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

Jack Shaft Mounting plastic guide 4.5:1 reduction
Gear drive
Fits 3-3/8" minimum offset
Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
1 chain keeper
2 shaft collars

.......more details

Sell sheet

RBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

MB-02001

Micanan Electric Motor Only 3/4HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

K22-36899

LiftMaster Single Phase Brake Solenoid L5

4-wire connector for single phase
120 volts on terminals 1 & 2 (closest to the plunger)
240 volts on terminals 3 & 4 (farthest from the plunger)

Wiring diagram

Z9200

Cable Snubbers Sold as a Pair

Prevents slack from forming in cables
Sold in pairs

Installation Instructions

HSC-600-JAWS

Replacement Jaws for Hand Swager

Can be used as replacement jaws for both the HSC-600 hand model and the HSC-600-B bench model

VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

Installation Manual Sell Sheet

PED42

Pedestal Post 42" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look
Same as G559

MATDCBB3

LiftMaster Commercial DC Barrier Gate Operator Mega Arm Tower with Batteries ***Must include (2) x 29-NP712 battery***

24VDC barrier gate operator with battery backup
Continuous-duty motor with soft start/stop
Exceptional starting torque and continuous operation
Heavy-duty motor supports 6000 cycles per day
Operator speed of 2.5 seconds to open or close
Aluminum alloy chassis

.......more details

Installation Manual Sell Sheet

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

QUICK_CLOSE

Commercial Quick Close Device / Universal Timer V7

This device will automatically close the door as soon as the vehicle passes through the safety beams.

Wiring Instructions Monitored connection Non-monitored connection

PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

Monitored NEMA 4X enclosure through-beam type photocell
4-Wire
Suited for industrial environments
Range: 45 ft
Supplied with 3ft of wire

Installation Manual

8FT-RAIL-BELT

LiftMaster 8' belt drive rail 2778BD - colour code: White

Price reflects cost if purchased with an opener

NIR

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5200-2)

Watertight packaging
Detection range: 30 feet
6 foot cord
Reflector Bracket and mounting hardware Included
2 LED indicators
Sensitivity adjustment

.......more details

Installation Manual Sell Sheet

41A5021-I

LiftMaster Electronic Circuit Board Assembly ** To Extent of Inventory

Assembly includes: Logic board end panel and light socket
For chain drive models with 2-lights
Fits 1265 Security + 390MHz
Also known as; 41A5021 41A5021-B 41A5021-C 41A5021-D 41A5021-E 41A5021-F 41A5021-G 41A5021-H