Devanco Canada - Get The Right Garage Door Opener‎ and Parts

23-10916

LiftMaster Interlock Switch SPDT

Interlock switch for LM commercial door openers with hoist disconnects
15A 125/250VAC

02-103L

LiftMaster Push Button Station 3-btn Surface Mount O/C/S Nema 1 with Maintenance Alert LED

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Works with Liftmaster MH commercial operator
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

.......more details

LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Random Coded

Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
Can be used for larger vehicles with higher cabs as vans various trucks
20-25 foot detection zone
Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

LM21AFCB

LiftMaster Advance Fire Control Release Device

UL 864 Revision 9 compliant.
3 count obstruction cycling.
Selectable 10 20 30 or 60-second time delay on alarm.
Test key switch – Floor level testing.
Motor voltage sensing.
Form C relay output.

.......more details

LM21XPBB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting

.......more details

Installation Manual

OMNI-EXB

LiftMaster Relay Module

AFB120

LiftMaster Fire Access Box w/Micro Switch & Knox Key Switch Option

ll-in-one fire access box
Includes: access door with a hole for a standard or fire department padlock interior micro switch knock out for Knox key switch and standard cylinder lock
Two options for automatic gate access: 1) micro switch is activated when the padlock is removed and the front panel is opened or 2) via Knox key switch
NOTE: fire department padlock and Knox switch NOT provided

02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

Code on key is #301

LM21XP

LiftMaster Extended Performance Fire Door Release Device

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting

.......more details

Installation manual

02-101

LiftMaster Single Button Nema-1 Pushbutton Control Station

Surface mount

02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

Single Pull Switch Control
Hazardous Area Overhead Mt. (NEMA 7/9)
Die cast hazardous area enclosure
May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.

.......more details

02-411

LiftMaster Pull Switch Assembly Nema 4

May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).

02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

Swivel end
Nema 1
Same as Pull Cord

02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder is replaced with BEST cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

02-410

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

02-409B

LiftMaster Key Switch with Best Cylinder

Two Position Key Control Station
Outdoor Surface Mt. (NEMA 4/12)
Tamperproof
Die cast metal enclosure with BEST cylinder (construction core included)
OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
Dimiensions: 3" x 3.2" x 4.2"

.......more details

02-409

LiftMaster Key Switch 2-Position Nema 4/12

Two Position Key Control Station
Outdoor Surface Mt. (NEMA 4/12)
Tamperproof
Die cast metal enclosure with standard key cylinder
OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
Dimiensions: 3" x 3.2" x 4.2"

.......more details

02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

Two-position keyswitch. Key removable in either position.
Surface Mount
May be used on all operators
Die-cast metal enclosure non-tamperproof

SRDRKP

LiftMaster Keypad Smart Reader

LiftMaster Smart Readers offer a contemporary appearance and leading-edge feature set to add access control to any door or entrance in your building or community including mobile credentials capabilities.
Standard technologies include Proximity (125 KHz) Smart (1356 MHz) and Bluetooth so that customers can migrate to newer secure credentials.
BLE communication enables myQ Mobile Credentials within the myQ Community app and ecosystem.
OSDP Auto-Connect feature to switch from Wiegand to OSDP when connected to the OSDP port on the CAPXLV2.
Accelerometer - based tamper detection
Tri-State LED light bar for user feedback

.......more details

LMUNTG

LiftMaster Glass Mount Parking Pass Tag Sold Per Card

A security-enhanced RFID passive transmitter for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader.
Glass-mount means it can be affixed to either the windshield of a car or to the headlight housing of the vehicle
Aligns with the cone-shaped detection zone from LiftMaster RFID Reader and activates it to open gate barrier
Added security of single mount use: shuts off if removed after adhering to a surface
Use on trucks or other high-clearance larger vehicles; 20-25 ft detection range from reader
Tags are sold in batches of 50. Your location may have a facility code. Check with your maintenance department or administrator if needed

.......more details

Installation manual Manuel d'installation Sell sheet Brochure


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login