Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Commercial Door & Gate Operator Accessories
LM21XP

LiftMaster Extended Performance Fire Door Release Device

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
    • .......more details
Installation manual
STATION080

Manaras 3-btn Push-Button Control Station with Key Lock-Out and Pilot Light Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
  • Schneider Elect. part no. XALD04H7
AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

AIRSWITCH007

Manaras Exterior Adjustable Air Switch SPDT

  • To be used with metal case part # AIRSWITCH008
CP-LX600

Lynx Thru Beam Photocell N1 - Replaced by FR-1000 Fraba

  • Used on the UL325 operators
WD-309961

Wayne Dalton Wired Wall Station 372Mhz 3976

  • 2 Buttons
  • Color: Cream
  • Dimensions: 2-1/4"" x 4""
  • Works with Wayne-Dalton Models: Classic Drive: 3014 3018 3018DLX 3514 3522 3522DLX; Quantum: 3214 3314 3316 3414; Prodrive: 3220C 3221C 3222C 3224C 3320B 3322B 3324B
RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

  • The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation manualSpec sheet
4X16PO50

Devanco Loop 4' x 16' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
4X20PO50

Devanco Loop 4' x 20' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation instructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
CPS-EI

LiftMaster 4-Wire Sensing Edge Interface

  • Designed to provide advanced safety and security to the door system in commercial environments.
  • This device is intended for use with LiftMaster Logic Commercial door operators and compatible with 4-wire monitored sensing edges.
  • This is a stand-alone reversing system and is not intend to be used in conjunction with any additional entrapment protection devices.
  • A junction box not provided is recommend to protect exposed wiring.
  • Compatible with Logic 5.0 Logic 4.0 Medium Duty Operators and Fire Door Operators.
DW-3S-200

Fraba Air Wave Switch Small Housing NOC

  • Fraba DW3S-200 air switch
  • Normally Open Contact (NOC)
  • Small Housing does not come with copper end
  • Screw Type Connector
  • Housing dimensions: 101x48.5x48 mm (3.97x1.91x1.89 '')
  • Housing: ABS Switch: PA6V0
    • .......more details
Operating Instructions
WPS-1H-110V

Wall Pull Switch with 110V Heater

  • Wall Pull Switch Nema 4 Momentary Contact
  • Made of Aluminum DieCast
  • Equipped with a bronze sleeve bearing which provides smooth pull down actuation.
  • Cast Aluminum rotating cam allows for 360 degrees rotation and pivots downward 30 degrees off vertical from any direction.
  • Designed for industrial doors and fast moving lift truck operators.
  • Two 3/8" plugged holes on top for ceiling mount ( remove plugs for ceiling mount)
    • .......more details
RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

  • Replacement reflector for the CPS-RPEN4 photo-eyes
1A3982

LiftMaster Operator Splash-Proof Cover

  • For models: MH H HCT GH
  • For wall mounted operators 31" L x 19" W x 18" D assembly required.
Installation manual
02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

  • Two-position keyswitch. Key removable in either position.
  • Surface Mount
  • May be used on all operators
  • Die-cast metal enclosure non-tamperproof
MIRCU-02

Miller Edge Universal Non-Monitored Interface

  • Converts a monitored pulsed signal to a non-monitored normally open signal
  • Creates a Fail Safe signal; reports a fault when power is lost
  • Ideal for use with pre-2010 commercial door operators
Installation instructionsSell sheet
MK-00060

Micanan Timer Plug-In Type 0-10min 24V 8-Pin

Programming InstructionsAdding a timer
MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
2X6PO50

Devanco Loop 2 x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
K41-0083-000

LiftMaster Bridge Rectifier HD Gates

  • For use with various LiftMaster® Heavy Duty Commercial Slide and Swing Gate Operators (HDSL24UL & HDSW24UL)