Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Garage Door Opener Parts
24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

  • For Stanley Chain/Cable Openers Only
  • Not for Stanley Full Chain Openers
  • Replaces Part #920-0147
041000

Surge Protector1080 Joules UL Listed (041008)

  • Woods surge protector
  • Full 3 line protection
  • Electrical rating – 15 A 120 VAC 1800 W
  • Voltage protection – L-N: 400V L-G: 500V N-G: 400V
  • 900-1500 Joules surge protection
  • Max Surge protection – 6000 V
    • .......more details
CR-2154

Raynor Replacement Photocells *** Discontinued

  • The original PEC-R3 Sensors manufactured by Raynor are no longer available.
  • The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
  • Includes both the Emitter and Receiver sensors
  • Includes new sensor mounting brackets. Wires are not included.
  • These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
  • The new CR-2154 Sensors require new mounting brackets (included) to be installed
    • .......more details
95358

Marantec Front Idler Assembly

  • Complete Roller holder assembly for ML-Series rails
  • Used for belt and chain drive opener rails
  • Same as # 8030432
41176R

Genie Shaft Assembly Kit 6070/6170

27091A

Genie Limit Worm Gear for PMX500

  • Limit worm gear sits in the Limit switch plate and works with the Limit Worm Drive to activate the limit wheel
  • Works With Genie Models PMX 500-IC/B IC250/B
36045A

Genie Helical Gear 2040L

  • Helical gear assembly for the Genie #2040L garage door opener.
  • Same as: 36045AS 36045. 36045A 36045S
  • Includes: Helical and limit gear screws clips and small tube of grease.
27222A

Genie Sprocket Bushing *** To extent of Inventory

  • For Genie Chain Drive or Belt Drive Channel Rails.
  • Fits the following models: PMX700 PMX1200 GPS00-IC GPS1200-IC
  • Available to extent of inventory
39153R.S

Genie Optical Encoder AC Screw Drive Models

  • Compatible with models; 2562 2564 2568 PowerLift® GPower 900
  • Also called the RPM sensor it is used to resolve the issue of short travel problems or drifting limits on the garage door opener.
  • Single & Dual encoder
20449R

Genie Chain Glide Rear Housing Cover

  • Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
  • Contains gear housing cover only
38877R.S

Genie Non-Configured Circuit Board

  • Replaces the following models: 38001R1.S 38001R2.S 38001R3.S 38001R4.S 38513R.S 38514R.S 37470R1.S 37470R2.S 37470R3.S 37470R4.S 38334R1.S 38334R2.S 38334R3.S 38334R4.S
  • Compatible with Series II Controls and comes with only the circuit board
  • In order for this kit to function properly it is important that customers know the model of their opener.
  • If unsure as to what resistor needs to be remove refer to the instructions that came with the unit
38123A

Genie Powerhead Mounting Flange

  • Mounting bracket connects the powerhead to the rail assembly.
  • A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
  • Fits TriloG PowerLift GPower and PowerMax Operators
37561S.S

Genie Belt and Bullet Assembly 8ft

  • For use on 8 ft doors
  • Compatible with the following:
  • SilentMax 1200 (Model 4042) 1000 (Model 3042) 750 (Model 3055) 550 (Model 2055)
  • ReliaG 650 (Model 1028) 850 (Model 2028)
  • IntelliG 1000 (Model 3024)
33223A

Genie Bushing

  • Drive shaft bushing on PMX500 Chain Glide
27089A

Genie Washer

  • Drive shaft washer for PMX500
38415A

Genie Chain Drive Sprocket

  • For Genie & Overhead Door Models
  • This is a 8-tooth sprocket with a hex drive bore
  • Genie Brand Models: Relia-G 600 Relia-G 800 1024 2024 QuietLift-600 QuiteLift-800 1042 2042 ChainLift-800 ChainLift-600
  • Overhead Door Brand Models With CHAIN DRIVE: Legacy 800 2026 Standard Drive 1026
36773S

Genie Carriage Assembly for 8' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
36773R

Genie Carriage Assembly for 7' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
30257T

Genie Coupler Screw Drive Units

  • Used for attaching the screw of Genie screw drive rail to the motor head.
  • This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
  • If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
  • To check and replace that part remove the two screws holding the rail to the main power head
  • Mounts on rear of opener rail and fits in motor head.
36051R

Genie Replacement Carrage Assembly

  • For Genie belt drive garage door opener model 2040L