Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 3 Garage Door Commercial Door & Gate Operator Accessories
50150

Doorlec Electro-Mechanical Safety Edge and Weatherstrip Sold per Foot

  • For the protection of vehicles doors and safety of people.
  • Any upward-acting door may be fitted at the leading edge with an electro-mechanical safety weatherstrip.
  • This mechanism consists of a formed galvanized steel section covered with vinyl impregnated rubber hinged along the full width of the leading door edge.
  • Can be adjusted to approximately 2½" (63.5mm) to form a tight weather seal.
  • The hinge linkage is arranged that minimum pressure is required to activate the electrical control switch causing door to reverse direction of travel to the fully open position.
  • Reverse switch is enclosed in a galvanized housing with a sliding plunger to assure positive actuation every time.
  • For doors up to 14 ft. wide one switch is required. Over 14 ft. two switches are required.
  • Switch sold separately part # 50346
  • Operating voltage: 24V or 120V A.C.
CPS

LiftMaster Commercial Protector System Eyes

  • Universal commercial photo-eye kit for indoor use
  • Interface box allows CPS to work with all operators
  • 24 volt AC/DC supply voltage
  • Mounting hardware included
  • Sensing distance of 30 feet
  • Receiving Eye - A: 001D6857-1 Sending Eye - A: 001D6857-2
    • .......more details
Installation Manual
CPS-U

LiftMaster Commercial Protector System Eyes

  • For LiftMaster Logic 2 3 4 & 5 commercial operators only
  • NOT for outdoor applications
  • Allows activation of the timer-to-close
  • Mounting hardware included
  • Sensing distance of 30 feet
  • CDO 2010 Ready
    • .......more details
Installation ManualManuel d'InstallationSell Sheet
MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: nominal 30msec.
    • .......more details
LMTBUL

LiftMaster Monitored Through Beam Photo Eye w/ Heater Nema 4X

  • Tested and evaluated by UL and meet UL 325 requirements.
  • Long Range powerful beam provides reliable performance.
  • Sensing distance up to 90 ft.
  • Anti-Fogging Lens
  • NEMA 4X rated
  • Wireless network mode eliminates the need to wire between operators in dual-gate applications.
    • .......more details
Installation manualManuel d'installationProduct guide
1A3982

LiftMaster Operator Splash-Proof Cover

  • For models: MH H HCT GH
  • For wall mounted operators 31" L x 19" W x 18" D assembly required.
Installation manual
E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-N4

  • Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
  • Easy to wire terminal strip
  • Plug-in replaceable outputs
  • Range: 40ft
  • Power: 24-240V AC/DC
  • The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.
    • .......more details
Wiring DiagramsSell sheet
306839

Bircher Hercules 2s Microwave Motion Sensor for Industrial Doors

  • Two completely independent programmable outputs for endless application scenarios
  • Highly flexible program settings utilizing both outputs are now easier to program
  • 23' (7 m) long cable for maximum installation flexibility
  • 6-wire cable using traditional wire colors & thicker wire gauge for easier installation
  • Pulse on exit feature
  • Differentiation between pedestrian and vehicle traffic
    • .......more details
Installation ManualSell SheetField Size
RP-3002

Rubber Plug

  • To plug end of 3002 gum hose
LC-36M

LiftMaster Light Curtain Monitored

  • The Monitored Light Curtain is a primary safety entrapment protection device that is compliant with UL 325.
  • IP67 Water-resistant housing anodized aluminum corrosion resistant
  • Operating Temperature: -40° F to +140° F (-40° C to +60° C)
  • Liftmaster Compatibility: LOGIC 5.0 Medium-Duty DDO8900W / LJ8900W / LJ8950W / ATSWVFOH HPH1 / HPH2 HCTDCUL Fire Door Egress
BEA-10-FALCON

BEA Falcon Motion Detector Mount over 11'5"

  • Motion sensor with microwave activationsolution for industrial indoor and outdoor use.
  • Ideal for automatic industrial doors vehicle gates and detection and loading docks.
  • Sensor also has the ability to differentiate between pedstrians and vehicles
  • Can be set vertically from 0 to 180 degrees
  • Mounting height between 11.5' and 23'
  • 12/24V AC/DC
    • .......more details
Installation manualManuel d'installationSell sheetCut sheet
3001-0

Signal Tube Treadle Hose Black Sold per foot

  • Applications: for gas stations and apartments
  • I.D. : 3/8"
  • Also known as Drive Over Hose.
LMWEKITU

LiftMaster Wireless Edge Kit Monitored

  • Meets 2016 UL 325 requirements
  • Innovative industry leading low-energy Bluetooth® transmission up to 130 ft. range
  • Integrated Diagnostics with Gate Operator Speed Installation
  • Protects up to 8 entrapment points
  • Receiver accepts up to 4 transmitters
  • Transmitter accepts up to 2 wired resistive edges
    • .......more details
Installation manualManuel d'installationInstruction manualManuel d'instructionsProduct GuideGuide de produit
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
LM21XPBB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
    • .......more details
Installation Manual
CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

  • Waterproof photoeyes.
  • for direct connect to operators with Logic boards. L3 L4 L5
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
  • These eyes will also work on the Micanan UL325 monitored operators
Installation ManualManuel d'InstallationSell Sheet
02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure part # XALD03H7
Sell sheet
LM21XP

LiftMaster Extended Performance Fire Door Release Device

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
    • .......more details
Installation manual
60-2828

Industrial AB Thru-Beam Infrared Sensor Nema4

  • Infrared Sensor
  • NEMA 4 Hooded Metal Enclosures
  • Distance: 200 Feet
  • 12 - 24 VAC/DC
  • UL 325 Compliant
BEA-10-FALCN-XL

BEA Falcon-XL Motion Detector Mount under 11'5"

  • Same features as the Falcon detector but made specifically for extra low mounting
  • Mounting height between 6.5' and 11.5'
  • Detection zone: 13'x6.5' at 8 1/5'
  • Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor.
  • Sensor also has the ability to differentiate between pedstrians and vehicles.
  • Available remote makes it easy to make adjustments to all key parameters of the sensor while at ground level.
    • .......more details
Installation manualManuel d'installationSell sheetCut sheet