Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 1 HP
MIRM-T2

Miller Edge Patriot 2 Photo Eye Monitored 30ft Non-Contact ** NLA

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
  • If the beam is blocked the control unit signals the door operator to stop and/or reverse.
  • It is also available in fail safe wiring configuration (MIRF-T2).
  • Kit includes: Sender Receiver Telescopic Leg Kit 15 Feet Coil Cord and Junction Box with Cover
19-50106M

Chain # 50x106 (5-1/2') with Master Link

  • Also known as: 350120 199023
  • 106 links
TRACKS-SET-3

3" Tracks Set with Wall Brackets *** By Quote Only

  • Custom order to customer's needs
CABLE-NR-316-SS

Cable No Roll 3/16" 19x7 Stainless Steel 500ft

  • 19X7 SS 3/16” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
  • A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
K72-12507

LiftMaster Clutch Shaft Kit (3/4 & 1HP)

  • Clutch Shaft Kit 3/4 & 1 HP Trolley operators
  • Complete with: Clutch Plate Clutch Shaft Bearing 3/4' I.D. Sprocket 41B10x3/4' 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
Installation manual
12-2125

LiftMaster Flanged Ball Bearing 1-1/4" Bore **to extent of inventory

  • Fits SW490GL swing gate
Z9205

Door Scale Arm

  • Counter balance lever arm and a common bathroom scale will allow you to weigh a door up to 1250lbs
  • Set door on shaft and multiply scale reading times 5 to give you the door weight
  • Bathroom scale not included
Drawing
MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

  • Provides LED visibility on both sides to 12 ft. arm.
25E10050

Truck Door Center Hinge Black E-coat finish for Todco Roll-Up Doors

  • Steel construction Black E-coat finish
G71-26438

LiftMaster Timer-to-Close Factory or Field Install

  • Compatible with models VSL595 BG770 and BG790
  • Provides an adjustable timer in the operator control circuit which will close the gate automatically after the preset adjustable time interval
  • May be factory or field installed
  • Same as 71-26438 G7126438
111420.001.S

Overhead Cut-Off Switch for RSX Operator

  • Interlock switch for Overhead model RSX
Replacement Instructions
CABLE-NR-18-SS

Cable No Roll 1/8" 19x7 Stainless Steel T302-04 500ft

  • 19X7 SS T302 1/8” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
  • A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
  • Minimum break strength of 1700lbs
M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 1" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

  • Activates two devices
  • Wire lead antenna
  • 12 and 24 Volt models
  • Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
  • The receiver can be activated by any of the Delta-3 format transmitters
  • Mounting bracket supplied
    • .......more details
Installation Manual
2KW

Rolling Steel 2" Curved Continuous Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
YSG115-LED

Devanco Stop and Go Light Yellow Housing 115V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
  • Made in Canada
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
.273-2-5/8-RH-C

Torsion Spring .273 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2-5/8" Length: 12 ft
.243-2-LH-C

Torsion Spring .243 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .243 ID: 2" Length: 12 ft
G5MC-B

Skylink 1-Button Universal Keychain Remote with Bracket Black ***Discontinued

  • Operates most national brand garage door openers up to 2010 (see compatibility chart).
  • Small enough for carrying in a pocket or purse.
  • Fits in any new car remote housing compartment.
  • Ideal for convertibles motorcycles and bicycles.
  • Operating range of 100 feet and more.
  • 12-volt alkaline battery included.
    • .......more details
Programming InstructionsCompatibility Chart
BK304

Jamb bracket J-04 #4 12 gauge

  • Sold by the piece
  • Height 3.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK303

Jamb bracket J-03 #3 12 gauge

  • Sold by the piece
  • Height 2.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
Z9200

Cable Snubbers Sold as a Pair

  • Prevents slack from forming in cables
  • Sold in pairs
Installation Instructions
37301R

Genie C-Channel Chain Extension Kit

  • The extension kit for C-channel chain drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door
RBH501L5-RH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 ***Use RBH751L5-RH***

  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Brake standard on all RBH operators
  • #48 chain #50 output sprocket chain
  • Box does not include spreader
    • .......more details
Installation ManualManuel d'InstallationSell sheet
71B575G

LiftMaster Brake Kit 575V with Solenoid Field Install SL585 and SL595

  • Kit comes complete with: Brake hub kit brake release lever brake disk spring cup studs compression springs brake solenoid solenoid cover spacers mounting plate pressure plate feather key and conduit.
Instruction Manual
LA500-SLR-PKG

LiftMaster Solar Package for LA500 Gate Operator

  • Solar package includes: 2 - 33AH batteries 2 - solar panels (SOLPNL20W12V) battery harness (LA500SLRHARN) and the battery tray (K10-36183).
  • Must be used with the LA500-1PKG-XLM
  • Solar option NOT compatible with LiftMaster Internet Gateway
  • Solar option not recommended in certain areas - please call before ordering
Installation manualManuel d'installationSell sheetBrochure
AUXCARD

LiftMaster Auxiliary Relay Option Board

  • Provides additional contacts for and control of auxiliary devices such as external heaters security devices or warning devices
  • 5V to 240VAC
Programming Instructions
BEA-REMOTE

BEA Falcon/LZR Programming Remote

  • Makes it easy to set up and make adjustments to all key parameters of the Falcon motion detector while at ground level
Programming instructions
TH827-12V

Erone 7-Day Timer 12V

  • 12V AC/DC input voltage with battery back-up
  • Form 'C' relay
  • Easy to read LCD Display
  • Manual override button
  • Ideal to keep a gate open during the day
Programming InstructionsInstructions de programmationWireless System Chart
PED42

Pedestal Post 42" Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with 6 in. center radius giving a tight professional look
  • Same as G559
25605R

Genie Inner Slide Kit for Chain Drive Models

  • The innerslide attaches to the chain and connects the carriage to the chain
  • Works on the following Genie and Overhead Door models:
  • IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
  • SP99 – SP SERIES LD100-500-100A-550A LAD125-555
  • CM6000-6000A-60-70-80-60S
  • OHD-696 696CD + Others
    • .......more details
MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

  • Makes any garage door operator compatible with MegaCode transmitters
  • Simple plug-in design
  • Easy to install - one connection using two-conductor wire
  • Memory: storage for up to 10 MegaCode transmitters
  • Normally open contact activates for 0.5 seconds
  • Power: 110 VAC +/- 10% 60 Hz
    • .......more details
1086090001.S

Overhead Drive Gear for Overhead 556

  • White plastic gear only for Overhead model 556
GM3T-BX

Genie Universal Master 3-Button Remote - 37344R

  • Three Button Master™ Visor Remote
  • This 3 button remote can be used with 3 Intellicode openers
  • Replaces all Intellicode Series I And Series ll remotes
  • Replaces 9 switch and 12 switch 390MHz Genie remotes
  • Works with all Genie model Gated Community Receivers
  • This remote will not work with 315MHz Canada 12 switches openers
    • .......more details
Programming InstructionsInstructions de programmation
41A7562

LiftMaster Light Lens for 8360 8550 8355

  • Replacement light lens
892LT

LiftMaster 2-btn Sec+ 2.0 Learning Transmitter

Programming InstructionsInstructions de programmationSell Sheet
L0172-092

Low Temperature Grease 10oz Tube

  • Lubriplate multi-purpose low temperature grease.
  • Excellent cold operating characteristics
111010.0001

Overhead Door Serpentine VBelt 27" (6EPJ683)

  • Serpentine belt 27" long
  • Fits Genie GCL-T Trolley operator
  • Some Overhead drawbar models: JST RSX RMX
CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

  • Waterproof photoeyes.
  • for direct connect to operators with Logic boards. L3 L4 L5
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
  • These eyes will also work on the Micanan UL325 monitored operators
Installation ManualManuel d'InstallationSell Sheet
71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

  • Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
  • Works on LiftMaster trolley garage door openers
Instruction Manual
71-B120H

LiftMaster Interior Brake Kit with Cable 115V (Logic 3 4 and Models)

  • Interior mount brake kit for operation with chain hoist
  • Works on mechanical operators as well as logic 2 3 4 and early logic 5 motors.
Instruction Manual
16-5L304

LiftMaster Cogged Vbelt 5L 30.4"

T-931-M

FL-Allstar 1-btn Mini Transmitter 109391-311 MHz

  • This single channel miniature transmitter controls one door.
  • It has a nine switches encoder with three positions: + 0 and -.
  • Manufacturer's model number: 9931MT (190-109301)
  • Dimensions: 1 3/8'' x 2 3/4'' x 1/2''
19-48HL

Half Link #48

  • Half link for #48 chain (#410)
RA-LYNX-RCVR

Lynx External Receiver

  • Add to most operator systems
  • Use with either residential or commercial applications
  • Unlimited transmitter capacity
Programming instructionsCompatibility chart
T1B-DS

Lynx 1-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Use with receiver (RA-LYNX-RCVR) for open/close on commercial operators
  • Same as model 2211-L (TX)
    • .......more details
Compatibility chart
SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse latched or timed relay output
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Instruction ManualSell SheetWireless System Chart
BOARD065

Manaras Replacement Circuit Board (No Monitoring)

  • Replacement kit that includes BOARD060 (control board) & BOARD066R (power board)
  • For all Manaras operators built before October 2010
  • For newer models built after October 2010 use BOARD070 or replacement kit BOARD075
Installation ManualManuel d'installationReplacement ChartGuide de remplacement
DOORARM001

Manaras Door Lifting Arm Assembly

  • Complete door arm assembly for all Manaras trolley operators.
108210

Linear 1-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close mini remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

  • Three channels - three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
HAE00014

Linear Pulley and Bracket - Chain (HCT)

4005-16FT

Aluminum Retainer only for Heavy Brush 16' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
24-HWB-PAIR

Winding Bars Hex 24" Set of 2

  • Cold rolled hardened steel.
  • Hex shape keeps the bar from rolling away.
  • Machined to 1/2" at one end with a 5/8" outside dia. on the other end
  • Sold as a pair.
Z9955

Spring Gauge

  • Ruler style spring gauge
  • Stainless steel
  • Confirms spring ID & wire size
  • Place formed end between 2 coils count 20 coils to obtain wire size
HD8460-200

T-Handle Cable Lock System 2"

  • Complete cable locking system for a 2" door.
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
DM413

Cable Drum Standard Lift 12' 400-12 Pair

  • 12 ft Standard lift cable drum. Aluminum die cast alloy.
  • Max. door height: 12'-1".
  • Rated lift per drum: 375 lbs.
  • Max. cable diameter: 5/32".
  • Mounting: 1" tube or solid shaft with 1/4" keyway.
  • Cross references: D400-144 DNS 4-13 OMI 2100. 3/8"-16 x 2" hardened cup point set screws installed with red heads. Color coded (red=LH black=RH)
    • .......more details
H11G02

Hinge #2 x 11 gauge

  • 11 gauge # 2 hinge - 0.69 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
25-10001

Truck Door End Hinge for Todco Roll-Up Doors

  • Zinc plated steel construction
  • Four-knuckled to ensure smooth door operation
  • Cross Reference: T #69035 W #4007 220000
WSL-1

Devanco WeatherStrip Lubricant 275g aerosol

  • Lubricates and protects Weather strip on garage doors doors and windows
  • Helps prevents sticking during extreme hot and extreme cold conditions
  • Same as LS-300
  • 12 cans per case
Safety data sheetFiche de données de sécurité
81600

LiftMaster 81600MC DC Chain Drive Wi-Fi Bluetooth ***Discontinued***

  • Safeguards garage access by sending a new code with every click.
  • PosiLock® electronically protects against forced openings.
  • Alert-2-Close signals when a door is being closed by MyQ®.
  • The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
  • Customized DC Motor is purposefully designed and built to last.
  • Chain Drive system for steady performance and industrial strength.
    • .......more details
Product guideGuide de produit81600 Installation Manual81600 Manuel Installation
20113R

Genie Limit Switch Screw Drive

  • For use on Genie screw-drive openers.
  • Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
  • Replaces either the UP or the DOWN limit switch
  • Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
  • Not compatible with excelerator models
28103

Pillow Block Bearing Cast Iron 1" Bore

12-12004

LiftMaster 1" Ball Bearing

  • For use with various LiftMaster® Heavy Industrial-Duty Commercial Door Operators
  • Drive shaft bearing used on RBH
  • Same as K12-12004
8FT-I-BEAM

LiftMaster 8' I-Beam Rail 3708CH / CD1008

  • I-Beam Chain Drive Rail for model 3595
KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
    • .......more details
Installation instructionsManuel d'installationSell sheetBrochureWiring instructionsInstructions de cablage
.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
NIR-50

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5250-2)

  • Extended range for better performance in rain and snow
  • Compact design mounting hardware and indicators make it easy to install
  • Lower current draw of only 28mA makes it an excellent choice for solar and low voltage applications
  • Watertight package and optional protective hood offers protection for the NIR-50 from the elements and vandalism
  • Flexible voltage 12 – 240 Volts DC 24 – 240 Volts AC
  • Watertight package for reliable outdoor installation
    • .......more details
15-50B32LGH

Sprocket 50B32 1" shaft 1/4" KW

  • 71-1550B32LGH is a 32 Tooth Sprocket Kit 1" Bore x 1/4" keyway (50B32).
  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
39142R

Genie Aladdin Connect

  • Aladdin Connect™ controls and monitors your garage door opener with your smartphone
  • Compatible with smartphone iPad(R) & tablet devices
  • Easy installation & setup
  • Operates up to 3 doors with 1 system
  • Able to program timed closed functions
  • Wi-Fi communication Retro-fit capable Works with all brands
    • .......more details
Quick set-up guideGuide d'installation rapide
XT2564-00-W

Xcluder Rodent Block 4" Black 75' Reel

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
PDC300-1-125-40-20-CH

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PRO-GHW-5053U-R

Micanan 1/2HP 575V 3P Gearhead Op w/Carwas Mod N4 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
LEDSTRIP003

LED Light Strip (1 Unit) Red/Green/Blue 46" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
BGARM12ART84

LiftMaster TECHNA Barrier Gate Arm 12 ft w/84" Clearance without LED

  • 12’ Functional length arm with an 84” articulated clearance height from the base of the arm
  • All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
  • Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
  • Operating Temperature: -13°F (-25°C) to 140°F (60°C)
  • Requires TECHNA PARKING operator.
2120-493

Linear Gate Arm Assy Weld Style for Swing Gate

3257

Whiting General Purpose Bottom Seal #80841

  • Quote required prior to sale to ensure correct fit
LA400XL20W

LiftMaster Single Arm Solar Package for LA400 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA400DC)

  • Kit Includes: LA400DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
  • For dual gates order extra LA400DCS secondary arm
  • Updated unit complies with new UL325 code revised Jan 2016
210339

Skylink Belt Gear with Holder LQ-803

041-0400-000

LiftMaster Door Shaft Collar

  • Fits with LiftMaster model #98032
DWI-LOCK

Doorway Impact Monitored Slide Slock V2

  • Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
  • Connects to an Air/Impact switch to mechanically and electrically lock the door.
210346

Skylink Tube Rail Belt 7ft Door

  • Replacement belt only
34202

Doorlec V-belt Pulley MA15 1-1/2" x 5/8" bore

TRANSF168

Manaras Transformer 480X600-240V 60HZ 1500VA Leads Rapido

  • 480X600-240V 60HZ 1500VA LEADS
LEDSTRIP006

LED Light Strip (1 Unit) Red/Green/Blue 120" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
Installation Manual
LA400CONTUL

LiftMaster Standard 24VDC Control Box for Single and Dual Gate Applications Batteries Incl. UL325

  • Complete control box for new LA400U 2018 UL325 compliant
  • Includes box control board and batteries.
AFB120

LiftMaster Fire Access Box w/Micro Switch & Knox Key Switch Option

  • ll-in-one fire access box
  • Includes: access door with a hole for a standard or fire department padlock interior micro switch knock out for Knox key switch and standard cylinder lock
  • Two options for automatic gate access: 1) micro switch is activated when the padlock is removed and the front panel is opened or 2) via Knox key switch
  • NOTE: fire department padlock and Knox switch NOT provided
CAP-390-468

Capacitor 390-468 MFD 3/4HP *** To Extent of Inventory

  • Same as CP-CAP-COM-450-540
  • Motor start capacitor
DS100-SHEET-DOOR

Wayne Dalton Roll-Up Sheet Door Light Commercial ** Price by Quote Only

  • Sheet Door Made to Order
  • Round panel profile continuous curtains constructed of 26-gauge hot-dipped galvanized steel with a silicone polyester paint finish
  • Automatic door stop prevents the curtain from rolling up past the header
  • Heavy-duty steel axle supports door curtain and counterbalance system
  • Oil-tempered steel springs are engineered to counterbalance the doors providing for smooth easy operation and cycle performance
8-9069

Serco Latch Bar ** Price by Quote Only

  • For Serco loading docks
210-0053

TNR Doors CurtainLok Ass'y Kit UHMW-PE 5/pr per Kit (10pcs) ** Price by Quote Only

  • 5 complete curtainlok's with fasteners
  • Curtain Lok™ for 1/4” thick Rubber Doors
39902R

Genie Wireless Wall Console GWWC-P

  • Completely Wireless Installation – No need to have an additional wired wall console -absolutely no wiring required for operation!
  • Works with all Genie Intellicode® openers since 2013. (Not compatible with Models 1022 1024 1042 2022 2024 2027 2042.)
  • Large buttons and attractive blue LED light makes the console easy to see in the dark.
  • The pulsating light has two optional speeds or can be turned off for maximum battery life.
  • Backlighting will turn red to notify the user of low battery.
  • Turn only the garage door opener light itself on at any time for steady light in the garage.
    • .......more details
PRO-GH-30053U-LH

Micanan 3 HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Universal Right or Left Hand mount
    • .......more details
BOARD105AGF

Goff Replacement Control Board Non Monitored for Manaras Op

  • Same as 32042
  • Not available from Manaras
K75-37556

LiftMaster Drive Shaft Kit SL595UL

  • Idler shaft sprocket chain and chain links
821LMC-S

LiftMaster Smart Garage Control White

  • Smartphone control: Control secure and monitor your garage door from anywhere.
  • Universal: Works with all major brands of garage door openers manufactured after 1993.
  • New design: Compact modern design with a white finish that blends in with ceilings walls and garage doors. New mounting plate simplifies install.
  • Improved setup: Bluetooth Low Energy (BLE) integration makes setup easier than ever.
  • Download the myQ® App and follow the in-app instructions to get set up in minutes.
Installation manualManuel d'installationProduct guideGuide de produit
041-0155-000

LiftMaster Safety Sensor Brackets 2021-Present

  • IMPORTANT NOTE: The new safety reversing sensor brackets are only compatible with the new safety reversing sensors (041-0136) and are NOT compatible with older style safety reversing sensors.
  • For safety reversing sensor brackets compatible with models pre-2021 refer to 041A5266-3.
F210

NICE Adjustable Synchronised Photocells Thru Beam Includes Metal Housing (F210/ FA1)

  • The beam of the Nice F210 photocells has a horizontal scope of 210° thereby increasing the safety level of the system and simplifying installation: the gate or garage door to be automated quite often slide flush with the wall making it very difficult to position the photocell.
  • The F210 photocells are available with relay output