Devanco Canada - Get The Right Garage Door Opener‎ and Parts

K1D8052-1CC

LiftMaster Control Board for LA500DC LA400 LA412

014D1270D

SN1600341-K

LiftMaster Sentex Bypass PCB for TAC1 EL25

BY PASS Board for 1150051
Same as KSN1600341B

K72-33872-1

LiftMaster Limit Switch Shaft Kit

For models MT BMT MJ MH and MHS logic control
Kit includes: limit shaft limit nuts limit bearings limit sprocket washers compression ring roll pin and e-ring

4J

Rolling Steel 3" Curved Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

17J

Rolling Steel 2" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

2KW

Rolling Steel 2" Curved Continuous Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

7097

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Roadside (LH)

A Whiting original
Cable drum and bearing

SLT14-18P

Rolling Steel 3" Flat Slat 18-ga Primed

12-10715

LiftMaster Flanged Bearing 1" Keyed

GH755-L5

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

PL-B11-ARM-STR

Lynx Straight Arm for Proline Operator

Used on Proline residential garage door openers

.306-2-5/8-RH-C

Torsion Spring .306 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 2-5/8" Length: 12 ft

CF-101-8

Commercial Side & Top Weather-Strip 8' Long Aluminum / Vinyl

Same as Garaga CF101

IRB-SP

EMX Industries Liquid Tight Strain Relief Connectors Sold as a Pair

36605A

Genie Pulley Assembly Belt Drive *** NLA

Genie 36605A PULLEY
For Belt Drive Models
For Chain lift Belt Lift ReliaG 600 & 800 1022 1024 1042 2022 2024 2042
Also for Overhead Door Models Legacy 800 & Standard Drive Belt

MR00007

Micanan Brake Disconnect Cable 1/16" x 12"L c/w Cable Stop

2 Required per operator

19-5816-NP

LiftMaster Trolley Chain Pack #48 for 16ft Door Nickel Plated

Chain pack only

BSG12-24LED

Devanco Stop and Go Light Black Housing 12-24V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied

.......more details

Installation Instructions Instructions d'installation Sell Sheet

OPH-6214-ECB

Manaras Opera-H 1 HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

OPJ-6234-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 208V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

BOARD070ER

Manaras Replacement Control Board (No Monitoring)

On-board 390MHz radio receiver accepts 50 remote controls

Replacement Chart Guide de remplacement

T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

VBELT_5L345

Doorlec VBelt 5L 34.5" *** Replaced by VBELT_5L350

Same as part number #19052

MI00002

Micanan Pulley 8" OD c/w Bushing 3/4" ID

Z9200

Cable Snubbers Sold as a Pair

Prevents slack from forming in cables
Sold in pairs

Installation Instructions

APOW3

LiftMaster Transformer 120V input 34VDC output

Plug-in AC/DC converter
Used as a replacement transformer for all LA400 models

767

Fasteners Lag Screw Hex Washer Regular Profile 1/4" x 1" 1000/Box ***NLA

7/16" head

784

Fasteners Serrated Flange Nut 1/4-20 1000/Box

Serrated flange face to provide locking

37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)

APT501L5

LiftMaster 1/2HP 120/230V 1Phase Commercial Trolley Operator Logic 5 *** No Longer Availble

APT-style operators employ an auto-reconnect trolley with nylon inserts and a resilient-mount motor for quiet operation.
Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
APT operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

MT22-YELLOW-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

RBH753L5-LH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

36-RWB-PAIR

Winding Bars Round 36" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

H755L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 575 VAC 3 Ph Logic 5 Right Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

230/460V PRIMARY 24V SECONDARY 20VA

GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

Thermoplastic resin weatherseal co-extruded.
For Commercial / Residential applications
Screws directly to the top of door no retainer required

D111904

Mitto B RCB02 2-Channel Transmitter

Compatible with Lux 2B gate operator

1104-12FT-GREY

Residential Side & Top PVC Weather-Strip with cap 12' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

MU22-2WIRE-RH-B

Miller Edge MU22 2-Wire Right Hand Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

Fits 3265 PD612C
Replaces 41AC150-2 (board only - need to install on exisiting panel)
Also known as 41AC050 41AC050-2M

CPS-OPEN4

LiftMaster Monitored Dual-Sided Photo Eyes

For use with sectional or rolling doors.
May be installed in areas exposed to rain or moisture
Rubberized for more durability
Will work on LiftMaster residential operators

Installation Manual Manuel d'Installation Sell Sheet

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

For 2-wire edges
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz

.......more details

Installation Manual

VBELTB29

Manaras VBelt 5L 29" Type B (5L320)

For models OPJ OHJ OPH & OSH
Same as 5L320

50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

.234-134-L

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MV00077

Interlock Switch for Sectional Doors

Mounts on the door track to prevent the use of the operator when the door is locked

7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

I-Beam Chain Drive Rail for model 3595

CPS

LiftMaster Commercial Protector System Eyes

Universal commercial photo-eye kit for indoor use
Interface box allows CPS to work with all operators
24 volt AC/DC supply voltage
Mounting hardware included
Sensing distance of 30 feet
Receiving Eye - A: 001D6857-1 Sending Eye - A: 001D6857-2

.......more details

Installation Manual

K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

Compatible with wireless keypad model number 377LMC
Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
This transmitter is replaced by 894LT

AA

Battery AA Alkaline Duracell Procell Sold Individually

Sold Individually

41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

For models: 3800 3800P & 3800PLD
Also known as 002D1622

03-8024-K

Reversing Contactor 3-Pole

Reversing contactor with 24 VOLT coil
Dimensions: 3.5" long x 2.25" wide x 2.25" high
Telemecanique part # LC 2K09 107B7

R-831-P

FL-Allstar 1-Door O/C/S Receiver 107480-311 MHz***NLA

This receiver comes in a metal enclosure.
It has three isolated contacts to open close or stop the door. If your operator can be controlled by three button station then our R-831-P receiver and commercial remote controls will work with your operator.
Manufacturer's model number: 190-107480
Dimensions: 9 1/4" x 6 7/8" x 1 1/4".

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

CAM004

Manaras Limit Cam

Limit cam for Mountshaft009A 018C 018D
2 cam's required per shaft

41A6102

LiftMaster Power Door Lock

For Jackshaft models

.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft

17335

Doorlec DC-3100T 4-btn O/C/S Compact Transmitter 301 MHz

3 buttons for O/C/S and 1 button for turning lights ON/OFF
Includes 12V battery
Dimensions: 3-1/4" l x 1.5" w x 1/2" thick

PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

New version board works on operators with a red cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built June 2008 or later (date code 0806 or newer)
This board does not have a transformer.

TRANSF142

Manaras Transformer 575-24V 40VA

Transformer 575V Primary 24V Secondary 40VA

BRAKEPART018

Manaras Brake Shoe Assembly Kit

Kit includes SHOE001 & SHOE002 for old brake system.
Fits all Manaras operators except gear head made prior to 1999.

Drawing

298601

Linear Wireless Multi-Code Keypad 310 MHz

Compatible with 310 MHz Stanley and Multi-Code receivers
4-digit access code
Backlit keys
Easy access to battery
Power: 9-volt battery
Codes: 1024 (set by dip switches)

.......more details

Installation Manual

308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 1 door
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

Activates three 318 MHz MegaCode receivers
Test/operate LED
Visor mounting clip supplied
Two CR2032 batteries included
Codes: 1000000+ (MegaCode format)
Dimensions: 3" W x 1.875" H x .625" D

.......more details

Programming Instructions

15.1

Whiting Truck Door Stainless Steel Center Hinge

200BL

2" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1703

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-1/2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

For door thickness 2"

DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
8-dip switch 64 selectable codes
Same as: DNT00027B or DT4A
310 MHz frequency

Programming Instructions

371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz

Visor clip and 3V lithium button cell (CR2032) battery included.

371LMC Manual

1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.
DIE # ES18009

1104-8FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-18FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

1104-18FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 18' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond
Full case quantity only (12).

1104-16FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 16' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

1001-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

Aluminum retainer with black dual-fin vinyl

25-42-80

Extension Spring 7' Door - 80 lbs Gold

Double - Loop
25" long 42" stretch 80 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

95-00114

Truck Door Rivet 1" Stainless Steel

Stainless steel construction
Round head design
Cross Reference: T #89217-0032

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

25E10002

Truck Door End Hinge & Roller Cover Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Removable cover allows roller change without hinge removal
Cross Reference: W #1209 T #70162
Box quantity: 50

R5115

Bearing 1" Commercial with Flanged Retainer Football Style

1" Commercial bearing pressed in a Flanged Retainer Football Style
Type: Steel Bore: 1"
Inner Race Offest: 13/64"
Rated Load Cycles: 250 lb @ 10000 cycles (8')

Z9004

Shaft Key Bent 3" x 1/4"

3" Bent Key
Zinc Plated Steel

Z9404

Coupler 1-1/4" Bore Adjustable

Malleable iron for strength
With 2 jam nuts
1-1/4" Bore with 1/4" keyway

DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads. -
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".

.......more details

H11G01

Hinge #1 x 11 gauge

11 gauge hinge #1 - 0.61 lbs
Bright zinc-plated
For use with 7/16" stem rollers
Item code # 224185

CBC18

Thimble 1/8" - 100 per pkg

25-10501

Truck Door Max Strength Steel Lock (only) for Todco Roll-Up Doors

Superior strength heavy-duty cast grade 30 steel Zinc plated finish
Pins are mechanically fastened in place for optimum strength
Extra thick padlock provision designed for greater security
Trapped handle cannot pull out to bypass keeper resulting in tamper-proof lock
Spring assisted lock eliminates door bounce
Cross Reference: T #69571 280000

.......more details

41A5034

LiftMaster Snappy Beam Sensors ** DISCONTINUED USE 041-0136

Will work on all LiftMaster residential openers equipped with safety beams
For newer models 1999-current will fit on existing brackets
For older models 1993-1999 new brackets #41A5266-1 are required or use old style safety beams #41A4373A
New Gen ( 2021+) operators will have new snappy beam sensors part number 041-0136
Not compatible with the New Gen (2021+) 041-0155 snappy beam brackets

25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

Unplated shaft 10 roller ball design
Shaft Length: 6.5" Overall Length: 7.5"
Long stem roller has a staked collar design versus machined collar on others.

6X12PO50

Devanco Loop 6' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X15PO50

Devanco Loop 6' x 15' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep