Devanco Canada - Get The Right Garage Door Opener‎ and Parts

768

Fasteners Lag Screw Hex Regular Profile 5/16" x 3" 100/Bag

7/16" head

785149

FAAC XP15B Photocells 15m Range 785103

Surface mounted security devices with 15 m range.
The kit contains: 1 transmitter and 1 receiver.
The photocell has a BUS system technology "2easy" for easy installation.

K72-12509

LiftMaster Output Shaft Kit (3/4 & 1 HP)

For commercial operator model T
Complete with: Output Shaft Bearing Roller Chain with Master Link Limit Chain Shim Washers Roll Pins Push Ring 3/4' and Sprockets (41B32 & 48B10)

TRACK-GUARD-48

Track Guard 48" Tall Safety Yellow With Base Sold as a Pair

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
1/4” foot plate drilled with slotted holes for three 1/2” anchors.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: 60-5094 (right) and 60-5095 (left) sides

.......more details

48"Track Guard Shop Drawing - Left 48"Track Guard Shop Drawing - Right

36051R

Genie Replacement Carrage Assembly

For Genie belt drive garage door opener model 2040L

FD165C

Electric Motor Only 1.5 HP 110V 1Ph 56C Flange

PPLK1PH-10

LiftMaster Passport Lite 1-Button Mini Proximity Remote with Sec+ 2.0 Technology 10/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure

CPS-UN4G

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4 Black

Waterproof photoeyes.
Monitored Thru Beam Photocell
For direct connect on HCT

.375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

K20-1100C-2LP

LiftMaster Electric Motor 1 HP 115/230V 1Ph Logic *** To Extent of Inventory

MP00087

Micanan Track and #41 Chain for 7' h Door *Actual length 114"*

For 3/4 & 1 HP Micanan trolley operators

02-103L

LiftMaster Push Button Station 3-btn Surface Mount O/C/S Nema 1 with Maintenance Alert LED

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Works with Liftmaster MH commercial operator
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

.......more details

.262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Red/Yellow

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

A one piece travel module replacement kit.
Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
Same as 041D7742-5

Q089

LiftMaster Trolley Body Assembly Kit K75-50147

For Liftmaster trolley operator HCT
Kit includes: trolley body cover trolley wheel shaft installation screws ring clip plastic plugs and lock with keys set

98EO626

Panic Bar for Pedestrian Door- Exit Only

Panic Bar for exit only

JY-10

Devanco Solvent & Degreaser 400g

General purpose solvent and degreaser
Contains natural citrus oils. Cleans oily greasy and dirty surfaces.
Dries quickly and leaves no residue.
Approved by CFIA.

Safety data sheet Fiche de données de sécurité

GAREX-EB-PLATE

Garex End Bearing Plate 3-3/8" Special Order

GD-STEND-21D

End Cap Steel 18G 21" Double 1-3/4"

OTBH-6232-APT-C

Manaras Trolley Operator 1/2 HP 208V 3 Ph Apartment Model with Contactor

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
30 cycles per hour up to 100 cycles per day
APT model incorporates pillow block bearings on input shaft
A 4L/A v-belt

.......more details

Installation manual Sell sheet

IRB-MON-RX

EMX Monitored Receiver Board Only

Receiver board only for IRB-MON

PULL-CHAIN-ASSY

Pull Chain Spring and Chain Assembly 13' & 14' Doors

Used with a hand chain for full vertical doors.
Eliminates the need for leaf bumpers
Chain can be adjusted for smaller doors

AOMRON

Omron Heavy-Duty Retro-Reflective Photo Eye 110VAC/24V 40ft Range

24-240 VAC/DC
35mA/125mA at 24VAC
20mA/60mA at 110VAC
UL listed to UL325 standards
NEMA 3 4 12 Outdoor Rating
40 ft. sensing distance

.......more details

7001-16-CHARCOL

Commercial Side & Top Weather-Strip 16' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

EHJ-383-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 208V-3Ph

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.

MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

Exterior Through-Beam Photocell
Sensing Distance 45 Feet
UL325/2010 Recognized Component
Comes with Sender Receiver and Brackets
NEMA 4 & 4X

Installation manual

60-7238

Wheel Chock Tie Back Chain 15 ft Long 3/16" Galvanized w/ Quick Links

One tie back chain only

SPRING-FILLER

Spring Filler for 5-1/4" and 6" Torsion Springs Sold with Pre-Cut Springs only Sold per Inch

Required when ordering pre-cut torsion assemblies with cones

TBKL-14X4

Turnbuckle Loop Ends 1/4 x 4" 500 lbs

Hot dipped galvanized drop forged with lock ends
Eye & Eye ends
Work Load Limit : 500 LBS

3-42-2B

Bottom Bracket with Removable Roller Carrier Commercial 2" & 3" 2-Hole BB-6 Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

Sold as a pair (1-left and 1-right)
13-guage
Dimensions: 4-9/16" W x 11" H
For 1-3/4" door

WD-309884

Wayne Dalton 3-Btn Transmitter 303 MHz 3910

Visor Style (comes with visor clip)
Green Indicator Light
Size: 2-1/4"" x 3-1/2"
Works with Wayne-Dalton Models: Classic Drive: 3012 3016 3512; Quantum: 3211 3212 3213 3313 3412 3413
Same as models: 3910 02-3047-3BUH 297132

Programming Instructions

71-90TS

LiftMaster Timer Kit for TS Wiring

Field mod. kit

ALUM-562

Aluminum 24" x 100' Spool Commercial Brown # 562

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 562
Reverse side is #431 Bright White

Colour chart

SAG-M

Siren Activated Gate Sensor Formally SOS Sensor

New and Improved Siren Operated Sensor SOS.
Allows Entry of Emergency Vehicles through Gates
The Siren Activates Gate Opener while all other sounds are rejected
Comes with a 4 x 5 Inch Reflective Sign
12-24VAC/DC
Emergency responders use the YELP signal to activate the gate

.......more details

CB116A0500

Cable 1/16" 7x7 500' Galvanized

Galvanized cable 1/16" 7x7 500ft spool.

NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

Used on old MJH

DM518-125

Cable Drum Standard Lift 18' D525-216-125 Pair Torque Force

18' standard Lift aluminum die cast alloy.
Pair includes: (1) LH and (1) RH.
Color coded: Red=LH and Black=RH
Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
Max. Cable Diameter: 3/16".
Mounting: 1-1/4" solid shaft with 1/4" keyway

.......more details

MB-02002

Micanan Electric Motor Only 3/4HP 110/220V 1PH TEFC

Base mount motor fits: TW TBW JW HW HHDW SDW

E5761-A27

Automatic Systems Arm Shaft Assembly for BL27

French description: Ensemble Axe de Lisse
For model BL27 gate operator

28020004-500

Cable Stainless 1/16" 1x19 500' Inox *** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

MEL-T315

Miller Edge MEL Transmitter 315 MHz 2nd Generation

MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices

98875

Marantec Shark Tooth Position Reference Tab Chain Rail

For chain rails.
This part is installed inside rail on the actual chain.
This part works with the reference switch to determine the open & close limits of the garage door.
Reference switch part # 104083

27-24301

Truck Door Single Torsion Spring Assembly 89.5/48 for Todco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 89.50" Spring Length: 48" Wire Size: .243
Right hand wound
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire

.......more details

9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

19-48ML-NP

Master Link #48 Nickel Plated

For #48 chain

19-5116

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door

For 3/4 & 1 HP trolley operators

19-5116-NP

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

An original Whiting assembly

.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

Service kit to connect new LED arm to existing barrier gate
Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply

MALED12

LiftMaster LED Barrier Arm 12 ft

The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
Ideal for use with the Mega Arm and Mega Arm Tower

MV00021

Swivel Type Pull Cord - SPST Nema 4

Data sheet

CP-SH-58-1038

Lynx Complete Limit Shaft Assembly for MCJH

5/8" x 10-3/8"
Same kit used for HDC except the HDC has 1 extra 5/8" space washer

CPT-210-50

Miller Edge Bulk Extrusion 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black
End plugs adhesive and mounting channel sold separately.
Sensing edge size: 1-5/8"H x 1-3/4"W
When combined with the ME123 mounting channel it can be installed on doors measuring 1-1/2" to 2" thick.

Installation Manual Sell Sheet

1013-1-1/4-10

Rigid Vinyl Bottom Retainer L-Shaped 10' Long

For door thickness: 1-1/4"

PRO-HBH-7511R-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Left Hand (PRO HHDR)

3/4 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Electro-Mechanical Control Circuit (non-circuit board model)
3-btn open/stop/close (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation

.......more details

TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

DXR-701

Linear 1-Channel Digital Receiver 315 MHz

A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
The relay has four optional output configurations.
32 transmitter capacity
RF activity indicator
Quick-learn programming

.......more details

Installation Manual

1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

Prevents the 1104 from buckling in the hot sun

CABLE-NR-18-SS

Cable No Roll 1/8" 19x7 Stainless Steel T302-04 500ft

19X7 SS T302 1/8” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
Minimum break strength of 1700lbs

MK-00004

Micanan Travel Limit Switch

IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

1 ft L x 2" H x 3" W

1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

Double Angle Rails for doors up to 16' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 18' 11"

41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

21-10340

Transformer 115-24V AC 20VA

120V Primary 24V Secondary 20VA

MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

.......more details

Installation Manual Sell Sheet

4JW-RIGHT

Rolling Steel 3" Curved Cast Windlock 273004 RH

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

OEB-1

Super Sneaky Operator Extension Bracket

Improves installation safety
Extends operator rail travel length. Use a 7′ rail for 7’6" – 8′ tall doors
Saves extra 2" of headroom required by draw bar type operators
Pulls door clear of opening
Eliminates garage door overhang
Greatly increased installation ease & safety

.......more details

SLT-TT

Rolling Steel Thermotite Slat Foam Injected

GH753-L5

LiftMaster Gearhead with Brake 3/4HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

.192-2-RH-C

Torsion Spring 192 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .192 ID: 2" Length: 12 ft

RN0039-SS

Roller 3" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 100000 cycles of a 12' door
Stem Length - 8.312" Overall Length - 9.25"

41A5434-13

LiftMaster Full Belt Assembly for 8ft Door

For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D

71-EB1PH

LiftMaster Field Install Brake Kit 115/230V 1PH for L5 Operators Ext. Mount *** To extent of inventory

For operators already in the field without a brake
No longer available but drum brake upgrade available #K71-D1PH

Installation Manual

MX00147-OLD

Micanan Complete Clutch Kit for PRO-TB Old Style Frame

Before 2006
9" Diameter

MGR20-Y-2U-05

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

Installation Manual Sell Sheet

OGH-6112-ECB

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OPH-6432-ECB

Manaras Opera-H 1/2HP 480V 3Ph with Electronic Circuit Board

Installation Manual Sell Sheet

SHAFT017

Manaras Spacer for Trolley Tracks

T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

OPJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

K1D7545CC

LiftMaster Control Board Assembly for LA500 ** To Extent of Inventory

014D1065G

1005-1-3/4-8'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

Z9200

Cable Snubbers Sold as a Pair

Prevents slack from forming in cables
Sold in pairs

Installation Instructions

MTAW22B-R

Miller Edge MT22 Air Wave Black Right Hand Sold by the Foot

Installation Manual Sell Sheet

C-600-INSTALLED

Cones 6" Factory Installed (Pair)

For do-it-yourself installation use part no. SF600

RBH501L5-RH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Brake standard on all RBH operators
#48 chain #50 output sprocket chain
Box does not include spreader

.......more details

Installation Manual Manuel d'Installation Sell sheet

RBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

APT501L5

LiftMaster 1/2HP 120/230V 1Phase Commercial Trolley Operator Logic 5 *** No Longer Availble

APT-style operators employ an auto-reconnect trolley with nylon inserts and a resilient-mount motor for quiet operation.
Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
APT operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details