Devanco Canada - Get The Right Garage Door Opener‎ and Parts

H101L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Right Hand W/Brake ***No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee. Safety and Security
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'installation Sell sheet Brochure

MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

18-11379

LiftMaster Compression Spring

MOUNTSHAFT010

Manaras Hoist Shaft Kit for MJH (pre-1998)

Drawing

.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

32-34792

LiftMaster Gear Reducer Nema 56C 30:1

Compatible with LiftMaster® Model SL585 Slide Gate Operators
Same as K32-34792

7FT-BELT-SKYLNK

SkyLink 7 ft Rail Belt

4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

26-945255

Truck Door Intermediate Panel (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
Compatible with DJ J operators

CP-LX225

Lynx Enhanced Relay Board

.250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

DXT-21

Linear 2-Btn 1-Channel Handheld Transmitter 315 MHz *** Discontinued

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

Installation Manual

K20-1050B-2P

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for BG770 BG790
Same as 20-1050B-2

SPF514-6

Spring Filler 12 ft Long No Fins

For use with 5-1/4" or 6" torsion springs
Accomodates both 1" and 1-1/4" shaft size

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

Maximum hi-lift: 164"
Capacity: 800 lbs per drum
Cable length: Floor to shaft center 181" minus amount of Hi-Lift
Cross reference: DNS 410-164 OMI 164HL M162-4165

PB-BE102BP

Contact Block N/C Contact Plastic Enclosure *** No Longer Available No Replacement

Base mount

BG790-50-11

LiftMaster Industrial-Duty Wishbone Barrier Gate Operator 1/2 HP 115V Arm & Weight Included ***Must include Arm G651208R***

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
Standard Features: Control inputs and Adjustable limit settings
Includes a 24' arm

Installation Manual Sell Sheet

7001-WG-8-MO

Residential Wood Grain Side & Top W/S Medium Oak 8' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-10-DO

Residential Wood Grain Side & Top W/S Dark Oak 10' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

K75-34790

LiftMaster Disconnect Kit for SL585

Kit includes: Release lever bracket cable compression spring washer screws clevis pin bushings roll pin bolts nuts & handle

Installation Manual

3BLM-BC

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose and Best Cylinder

Open-Close-Stop
Dimensions: 7" h x 2-3/4" w x 3-1/2" d
Exterior surface mount

3BLM-BC

157370

Decorative Lift Handle Yorktown Style 8-3/4" Stamped Steel Sold per piece

Black Stamped Steel
Also known as Spade Style
Mounting hardware sold separately
Priced per each

TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

TC134-10

Top Cap 1-3/4" 10 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

14-1004

PVC Roll 8" x .080 Standard Clear Smooth 300' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs
A higher quality cable compared to the Chinese cable
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

29-17A3CO

LiftMaster Safety-Pack for N7 Operators

Intrinsically safe control circuit
K160-0192 is a Safety Relay Service Kit for various LM commercial ops

UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

.295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.295-134-R

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MD-00003

Sprocket 41B36 x 1" Bore 1/4" Keyway

2 set screw 5/16

029-98090

T-Style UDI Replacement Door White Stainless Steel Pkg 029-98090

For openings within 98" w x 90" h
Hardware attached balancer assembly not included
Manufactured to exact size

T112

Manaras Trolley Track 12ft for 3/4HP & All APT models *Actual length 174"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

25-4003-K

LiftMaster 2.6-3.7 Amp Overload Fuse

For models: SL595-200-53

SGP-353-2-575/3

Doorlec Gate Master 2 HP 575V/3P with TEFC Motor

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater included

EL1-SS

LiftMaster Telephone Entry System Stainless *** No Longer Available

A Telephone Intercom and Access Control System which provides wired telephone intercom communication and secure access control at the gate or door.
Connects directly to the existing residential home phone line so no additional monthly expenses are incurred.
Stainless steel faceplate with black powder coated housing is attractive and tough.
200 (4-digit) unique programmable entry codes provide convenient assigned access.
Optional power supply transformer not included: K002B0821-1

Programming Instructions Instructions de programmation Sell Sheet

HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

For use with D-TEK detectors (most commonly used)
Hourglass shaped

HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

Co-extruded using rigid PVC backing with flexible PVC seal.
To be used with the offset U-channel retainer only (26-40037 or 26-40039)

26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40045

LIMIT025A

Manaras Single Snap-Action Limit Switch with 'S' Lever

For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

CAPACITOR008R

Manaras Capacitor 440-648uf incl. Bleeder Resistor

Used for 3/4 HP 120/230VAC 1 ph motor255 374 & 258
Also for 1 HP 120/230V 1 ph motor350

VBELT_4L370

Manaras VBelt 4L 37"

Used on MJH models from 1980 - 2000

MA117

LiftMaster Counterweight for Arms 15ft & Up

MA116

LiftMaster 17 ft Aluminum Arm Round Yellow/Black Stripes ***NLA Repl. by MA116RDOT

Used on Mega Arm gate operators
Requires counterweight model MA117 - sold separately.
Size: 17 feet long x 3" round
Arm opening area: 14ft (end of cabinet to arm tip)
Replaced by MA116RDOT

BK022/PR

Commercial 3" Aluminum Bottom Bracket with Cable Adjustment Sold as a Pair

Rating: 2200 lbs max per door
Use with: 3" straight track
Aluminum bracket with zinc plated hardware
Sold as a pair (includes one left and one right).

50150

Doorlec Electro-Mechanical Safety Edge Sold per Foot *** Quote Required

For the protection of vehicles doors and safety of people.
Any upward-acting door may be fitted at the leading edge with an electro-mechanical safety weatherstrip.
This mechanism consists of a formed galvanized steel section covered with vinyl impregnated rubber hinged along the full width of the leading door edge.
Can be adjusted to approximately 2½" (63.5mm) to form a tight weather seal.
The hinge linkage is arranged that minimum pressure is required to activate the electrical control switch causing door to reverse direction of travel to the fully open position.
Reverse switch is enclosed in a galvanized housing with a sliding plunger to assure positive actuation every time.

.......more details

27-20114

Truck Door W-Style Spring Assembly Curbside RHW 35" Long

Wire thickness: .187
Assembled Spring length: 35 inches long
Inside diameter: 2 3/16"
Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.

27-20115

Truck Door W-Style Spring Assembly Roadside LHW 35" Long

Wire thickness: .187
Assembled Spring length: 35 inches long
Inside diameter: 2 3/16"
Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.

CABLE-NR-18-SS

Cable No Roll 1/8" 19x7 Stainless Steel T302-04 500ft

19X7 SS T302 1/8” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
Minimum break strength of 1700lbs

MK00737

Micanan Feature Circuit Board with Contactor Interface Non-Monitored 575V **use MK00642-NM

For all HP - 575V all voltages 1.5 2 3 & 5HP
Non-Monitored

Instructions Manual

10-1000-BAR

Strip Curtain Universal Mounting Bar Pre-Studded Angle Sold per foot

Includes: 1 cinch plate and 2 wing nuts which covers 6 of the pre-studded bolts at one time making installation and maintenance easy.

97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

97-75005

DOT-C2 Reflective Tape 150 ft x 2" W All White

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

IS40P

BEA Presence Sensor

Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
Equipped with 9 pre-programmed pattern configurations for various industrial applications.
Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
Mounting height: 8-16'
Detection field: 10'x10' at max. mounting height of 16'

.......more details

Installation manual Sell sheet Cut sheet

GH4416-09-L

Green Hinge #9 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-08-L

Green Hinge #8 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-05-L

Green Hinge #5 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-06-R

Green Hinge #6 12-ga Right Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-04-L

Green Hinge #4 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-03-R

Green Hinge #3 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-01-L

Green Hinge #1 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

S142ARNN924

Carlo Gavazzi Amplifier 24V

Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
11-pin circular plug for easy connection.
8A SPDT relay output NPN/ PNP transistor output or alarm output.
Diagnostics for sensor test during operation.
Alignment help via LED or alternation of alarm output.
Level indication for dirt accumulation.

.......more details

Installation Manual

K-LA400

LiftMaster Primary Replacement Arm Service Kit for LA400 Original Silver Arm

Replacement arm only - no stripes old style

IG2-P1

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

Flexible spring loaded pedestal stand
30 degree of flex
27" high from bottom base to photoeye

RS10311

Roller 3" Steel 11" stem 10 ball

Steel Roller Wheel diameter: 3"

MA013

LiftMaster Shear Pin #6 (Standard)

For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear

MB-02102

Micanan Electric Motor Only 3/4HP 230/460V 3PH

Base mount motor fits: T TB APT J EJ H EHJ HHD SD

DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

500 users (proximity badges and/or codes)
3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C door relay output (3A/125V)

.......more details

Programming Instructions Instructions de programmation Sell Sheet Wireless System Chart

9382054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones RHW

41.25" long = 160 coils

100MAPS

LiftMaster External Power Supply 110VAC Input 12VDC 2000mA

Provides enough power to operate two LC-36A light curtains.
Includes 38' cable leads

K75-51048

LiftMaster Cover with Crank Housing for SL3000 **DISCONTINUED

HD polyethylene cover

41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

With end-panel
Also known as 41A5507 41A5507B

27-48-400

Extension Spring 8' Door - 400 lbs Tan

Single - Loop
27" long 48" stretch 400 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G03-SS

Hinge #3 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

Double Angle Rails for doors up to 16' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 18' 11"

Z9967

Roller Chain Puller *** To Extent of Inventory

Allows chain to be pulled together for attachment of the master link
For 35 thru 60 chain

KSWG-0623

LiftMaster Rear Connector with Pin for LA500DC

EP2986

Exhaust Port 5" non latching long barrel

5" inside diameter 2" sleeve - non latching.
Includes fasteners & gaskets.
Polished aluminum finish.

ME120-C

Miller Edge Aluminum Mounting Channel Sold per Foot

1-1/16" Wide 9/16" High

MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

For 1/3 HP and 1/2 HP operators only

MP00018

Micanan Up-Charge Track and #41 chain for 18' h Door *Actual length 246"*

For 3/4 HP and 1 HP operators only

MP00014

Micanan Up-Charge Track and #41 chain for 14' h Door *Actual length 198"*

For 3/4 HP and 1 HP operators only

9003-9FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 9' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

41DS002-2

LiftMaster Electronic Circuit Board Screw Drive Models 3840 *Discontinued*

Logic Control Board 315 MHz
Compatible with 3840 Screw Drive Purple Learn Button

SL18-ZP-COPPER

Zinc Plated Copper Sleeve 1/8" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST18COP. Stops are not zinc plated

PRO-HB5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Includes solenoid brake

Installation manual Specification sheet

6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

6X18SC50

Devanco Loop 6' x 18' Saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

PD180CBT30Q

Carlo Gavazzi Photoelectric Through-Beam Receiver 30M

Receiver only. If emitter is required order PD180CBT30MU
For Industrial doors and Gates
Range: 30M
Relay output
Supply voltage receiver: 12-24VAC/DC
Dimensions: 180m x 51 x 49m

.......more details

Installation Manual

PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

Emitter only. If receiver is required order PD180CBT30Q
For Industrial doors and Gates
Range: 30M
Relay output
Supply voltage emitter: 2 x 3.6VDC lithium batteries
Dimensions: 180m x 51 x 49m

.......more details

Installation Manual

17330

Doorlec DC-3100R 3-Channel O/C/S Receiver 301 MHz

Range of approx. 175ft (53.34m)
8 dip-switches for programming
24/120V selectable
Made from polycarbonate plastic for rugged and weatherproof use
Includes a built-in antenna to eliminate interference and provide continuous reception
A plug-in wiring harness is provided to facilitate interconnection between power supply of operator and receiver

.......more details

DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** No Longer Available

Activates two devices
Wire lead antenna
12 and 24 Volt models
Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
The receiver can be activated by any of the Delta-3 format transmitters
Mounting bracket supplied

.......more details

Installation Manual