Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Bearings
OPH-6432-ECB

Manaras Opera-H 1/2HP 480V 3Ph with Electronic Circuit Board

Installation ManualSell Sheet
OPJ-6433-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 480V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
  • #50 roller chain and sprocket on final drive
  • Full overload protection
Installation ManualSell Sheet
SHAFT017

Manaras Spacer for Trolley Tracks

87-P-075

LiftMaster Turac 3/4" Push on Fastener

12-10331

Flanged Bearing 3/4" x 1-1/2" x 1/8"

K1D7545CC

LiftMaster Control Board Assembly for LA500 ** To Extent of Inventory

  • 014D1065G
27150A

Genie Chain Bullet

  • Compatible with: Genie – PMX60 PMX65 PMX80 PMX85 PMX300-IC/A & B IC250 IC250B PMX500-IC/A & IC/B ALC SERIES RCD SERIES
  • Overhead Door – 496 496CD (/A&B ) 696 (/A&B) 777 777CD
  • PASSPORT 286-386 286CD-386CD
  • Connects the two chain ends and also is the piece that the carriage engages
27175B

Genie Carriage Slide Only

  • Carriage NOT included. Carriage part number 20462R
  • Compatible with Genie GPS and PMX belt drive models
27220A

Genie Limit Switch Chain Drive

  • Compatible with the following operators: PMX700 GPS700-IC PMX1200 GPS1200-IC PMLD500 PMX500-IC/B PMX300-IC/B IC250/B PMX60-65-70-75-80-85-300IC-500IC-IC250 among others
  • For chain drive models with internal limits
75W-RS-BULB

Rough Service Bulb 75W ** Disc. to extent of inventory

9150000628

5/32" Stops ONLY 100/pkg

  • Stops only - 100 per pack
35616R

Genie Dual Frequancy Intellicode Receiver Board

  • For models: PCG500ML PCG700ML GCG350ML 2020L
  • Works on 315Mhz and 390Mhz
34516R

Genie Chain Glide Inner Slide ML Series with Magnet

  • For ML Series with Magnet: 350ML 500ML 700ML 800ML
34538R

Genie Up Limit Switch Assembly 66" Wire

  • For up direction on a ChainGlide System using magnetic limits
  • For models: 350ML 500ML 700ML 800ML and other ML Series ChainGlide door openers
  • Also for Overhead Door Python ChainGlide garage door openers
  • 66" inches of wire attatched
33950R

Genie Up Limit Switch Assembly 66 " Wire

  • For use on 7'6" rail assemblies.
  • For Genie Excelerator models and Overhead Overdrive models
  • Open / Up magnetic limit switch
375UT

LiftMaster Universal 2-btn Transmitter Next Generation

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • Visor clip and battery CR2032 included
Programming InstructionsInstructions de programmationSell Sheet
34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

  • For Chain Glide models
19792B

Genie Replacement Door Bracket Zinc

  • Universal door bracket to connect door to door arm
  • Same as 19792A04
797

Fasteners Clevis Pin 5/16" x 1" 100/Bag

MX00140-110-OLD

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Inside - Old Model

LA500HDTKITSTD

LiftMaster Torroid Transformer Kit

  • Powers gate from AC power-120V or 220V single phase.
  • Ideal for applications that prefer AC transformer run operator vs. battery run operator
  • Ideal for areas that experience temperatures below -4 F for extended periods
02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
    • .......more details
MA031

LiftMaster Adapter Collars 2/Pkg

  • For use with Mega-Arm padded arm
MD00327

Micanan Sprocket 50B15 x 1" 1/4" KW 2SS

CPE

Erone Proximity Card Standard

  • Hexadecimal number printed on each badge
  • 8mm thick
.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

  • 7/16" head
774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 2/Grade 5 depending on availability
23-2016

LiftMaster Limit Switch

  • Limit Switch for the VSL595
AELD

LiftMaster Elite Plug-In Loop Detector

  • For use with Omni Control board available on the Chamberlain commercial line.
Installation Manual
41A5389-1E

LiftMaster Receiver Logic Board

  • For low profile screw drive models with one light
  • Fits models 2110 2220
Replacement Instructions
5X10SC50

Devanco Loop 5' x 10' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

  • AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
  • There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
  • The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
  • Battery is included # CR2032
Installation ManualSell Sheet
SSZP7-6

Solid Shaft 1" Keyed Zinc Plated 7'-6"

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

  • Chain pack only
19-5812

LiftMaster Trolley Chain Pack #48 for 12ft Door

  • Chain pack only
K72-12506

LiftMaster Clutch Shaft Kit (1/3 & 1/2HP)

  • For 1/3 and 1/2 HP models - L5
K72-10047

LiftMaster Limit Shaft Kit

  • For models T APT SD & GH 1/2 HP - 2 HP models L5
K75-10387

LiftMaster Slider Assembly for APT

K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

  • Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.
Installation Manual
CH505L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
  • Comes with 02-403P NEMA 4 push button
Installation ManualManuel d'InstallationSell sheetBrochure
CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
H505L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
H751L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by the RBH751-LH

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
H751L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by the RBH751-RH

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

  • 230/460V PRIMARY 24V SECONDARY 20VA
K001C8103-1

LiftMaster L5 Antenna

K72-14130-1

LiftMaster Limit Shaft Kit

  • For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
  • Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.
LC2D129B7

Contactor Telemecanique 24V ** Discontinued

26-14625

Truck Door Top Panel (15" x 98") for Todco DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
26-94623

Truck Door Top Panel (13" x 98") for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
71B575G

LiftMaster Brake Kit 575V with Solenoid Field Install SL585 and SL595

  • Kit comes complete with: Brake hub kit brake release lever brake disk spring cup studs compression springs brake solenoid solenoid cover spacers mounting plate pressure plate feather key and conduit.
Instruction Manual
MOTOR254-WIRED

Manaras Electric Motor 1/2HP 120/240V 1PH Wired (MOD025A04)

  • Continuous-duty base mount 60Hz
  • This item is compatible with BRAKE011
IS-3

Interlock Switch for Rolling Steel Doors / Grills

  • Prevents the control of the operator when the door is locked.
  • The switch is a normally closed contact which is connected to the operator interlock terminal.
1104-12FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 12' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-9FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 9' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 8' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
12-000I-KEY

Spare Key for American Access Keypad

  • Spare key only for model 12-000I
1104-12FT-GREY

Residential Side & Top PVC Weather-Strip with cap 12' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-16FT-GREY

Residential Side & Top PVC Weather-Strip with cap 16' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1005-2-12'

Aluminum Bottom Retainer U-Shaped 12' Long***Actual Length 12'2"***

  • For door thickness 2"
PULLEY014

Manaras Motor Pulley Standard 2" x 5/8" 5L/B

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

  • Up to 100 000 individual codes
  • Mounts to wall or gooseneck post
  • Incl. 6-volt alkaline battery
  • Illuminated stainless steel faceplate and keypad
  • Tamper-resistant case and "low battery" indicator
  • Requires 412HMC receiver
    • .......more details
Installation ManualSell Sheet
G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

  • Increases one number each time current is applied
  • Connects to the 24 volts of contactor coil
  • Simple 2-wire connection
  • Same as 50-12862
7FT-BELT-LDO

Linear 7ft Belt Drive Rail for LD050/LS050/LDCO (HBT7C)

  • 7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
K20-1075B-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1PH L3 L4 *** NLA Replaced by H24

  • Standard 3/4HP 115V Logic 3 or L4 model T J HJ SD & H
UCF-1

Self-Aligning Cast Flange Bearing 1" Bore UCF205-16

  • Grey cast iron painted.
  • Comes with 2x set-screws 1/4-28
  • Square 4 bolt
EL25S

LiftMaster Telephone Entry System Silver

  • Capable of accepting up to 2000 codes
  • 4 assignable and programmable built-in relays
  • Mounting versatility and available in 3 colors: Gray Nickel or Silver
Installation ManualSell Sheet
DF086.1

Whiting Dry Freight Door 3/4" with Track Balancer Standard Hardware and Side Seals

  • Includes side seal upgrade
41A5624-8

LiftMaster DC Passpoint Assembly

  • Travel Module for 3850
BK000-B

Residential Top Roller Bracket Adjustable 2-Bolt Sold per Piece

  • Sold per piece - not sold as a pair
  • Meant for 2" hardware
OES-SD16

LiftMaster Optical Edge System 16ft

  • Sectional door edge kit 16ft (4.9M)
Installation ManualManuel d'InstallationSell Sheet
MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1000000 codes
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
    • .......more details
Programming Instructions
1005-1-3/4-12

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
029-98290

W-Style Replacement Door White Stainless Steel Package 029-98290

  • Replacement door size between 96-1/4" - 98" wide x 72-90" high
  • Painted white
  • Stainless steel package
M18

LiftMaster Remote Control Tester ** NLA

Z9405

Coupler 1-1/4" Bore Non-Adjustable

  • Malleable iron for strength
  • Set screws and jamb nuts installed
  • 1-1/4" Bore with 1/4" keyway
  • Length: 3.9"
OMNI-EXB

LiftMaster Relay Module

MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

  • Makes any garage door operator compatible with MegaCode transmitters
  • Simple plug-in design
  • Easy to install - one connection using two-conductor wire
  • Memory: storage for up to 10 MegaCode transmitters
  • Normally open contact activates for 0.5 seconds
  • Power: 110 VAC +/- 10% 60 Hz
    • .......more details
41A7756

LiftMaster End Panel with Light Socket for 8557

41A7619-4

LiftMaster Cover for 8557

333LMC

LiftMaster 3-btn O/C/S Transmitter 315MHz *** To Extent of Inventory

  • 315MHz dip switch technology
  • Green Yellow and Red buttons for easy identification of open close and stop.
Programming InstructionsInstructions de programmation
PRO-TB-5011-R

Micanan 1/2HP 115V 1P Trolley Operator with Brake - Contactor

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
1A3982

LiftMaster Operator Splash-Proof Cover

  • For models: MH H HCT GH
  • For wall mounted operators 31" L x 19" W x 18" D assembly required.
Installation manual
RESET003

Manaras Resettable Overload Fuse 6A 1 Phase

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts
10-10355

LiftMaster Solenoid Link

34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

  • Deluxe Wall Console for Genie Intellicode Series II only
  • 3 function console: operates door opener controls lights and security lock out switch
  • Compatible with Code Dodger
  • Same as previous part number: GPWC-2WLB
883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

  • Controls garage door operation and opener lights
  • Easy and fast programming
  • Compatible with Security+ 2.0 and MyQ remotes and accessories
Installation ManualManuel d'Installation
.218-258-R

Cut-to-Length Torsion Spring .218 x 2-5/8" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

  • Reflector (ER4) not included
Installation Manual
.283-134-R

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.218-134-R

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

  • Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation