Devanco Canada - Get The Right Garage Door Opener‎ and Parts

34516R

Genie Chain Glide Inner Slide ML Series with Magnet

For ML Series with Magnet: 350ML 500ML 700ML 800ML

733

Fasteners Flat Washer 5/16" Zinc 1000/Box

MD00017

Micanan Drive Sprocket 50B23 x 1" Bore 1/4" KW

RBH753L5-LH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

K72-12506

LiftMaster Clutch Shaft Kit (1/3 & 1/2HP)

For 1/3 and 1/2 HP models - L5

K001D8072-1

LiftMaster Single Phase Relay/Power Board (K001D8396-1)

For Logic 5 commercial operators
Same as K001D8396-1
014D1276E

71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Instruction Manual

MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

719323

FAAC Steel Rack for Model 844 Operator

3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

Self-Contained Keypad System for Door and Gated Entrances
500 Code capacity
Grained stainless steel Surface Mount
Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
Same as SN7000255
Sentex Keypad

.......more details

Installation Instructions Programming Instructions Sell sheet

PED42

Pedestal Post 42" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look
Same as G559

36163R

Genie Dual Frequency Intellicode Receiver 315 MHz & 390 MHz

For Genie Intellicode Rolling Code remotes Or Overhead Door Code Dodger remotes using the 315 or 390MHz frequency.
24-Volt 3-Wire Connection For Garage Door Opener And Gate Openers.
Accepts Up To 8 Genie Intellicode Or Overhead Door Code Dodger remotes on 315 or 390MHz Frequency. Note: Will not work with the older code switch type of remotes.

CR-2000

EMX Keypad/Card Reader Waterproof 5401-1

Back-lit keys for nighttime operation
2000 users (card or passcode)
Rugged waterproof design and vandal resistant
9-24 VDC
Tamper alarm
Door call button

.......more details

Instruction Manual Spec Sheet

821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

Enables smartphone control of most major brands of garage door opener with photoeyes.
Includes Wi-Fi hub and door sensor

Installation Manual Manuel d'Installation Sell Sheet Brochure

MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

Pro-H requires 3 of these bearings

41C0279

LiftMaster Light Socket for Sec+ 2.0

New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
Compatible with LiftMaster garage door openers manufactured from 1993 to present.
New "insulated" design eliminates interference from CFL bulbs therefore better remote control range

50-104-1

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO

.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-134-L

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

891LM

LiftMaster 1-btn Transmitter Sec+ 2.0

Controls a single garage door opener or gate operator or MyQ® enabled light accessory
Equipped with Security+2.0™ rolling code technology that virtually eliminates radio wave interference
3V lithium battery included
Compatible only with Security+2.0™ LiftMaster® garage door openers or gate operators
Equivalent to Chamberlain's 950ESTD

Programming Instructions Instructions de programmation

STRIP_CURTAIN

Complete PVC Strip Curtains Made to Order

Please call us for price and delivery we can supply complete doors and replacement PVC strips for existing installations. Many different sizes and colors are available

T-639

FL-Allstar 3-btn 9-Door O/C/S Transmitter 107476-311 MHz

This remote can control (open-close-stop) up to nine doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 639T (190-107476)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8".

Programming Instructions

T-931-M

FL-Allstar 1-btn Mini Transmitter 109391-311 MHz

This single channel miniature transmitter controls one door.
It has a nine switches encoder with three positions: + 0 and -.
Manufacturer's model number: 9931MT (190-109301)
Dimensions: 1 3/8'' x 2 3/4'' x 1/2''

41C4398A

LiftMaster RPM Sensor Kit

RPM sensor assembly 1986 - present

Installation Manual_bilingual

.250_3-3/4"-RH

Torsion Spring .250 x 3-3/4" x 12ft RH Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft

13-10024

LiftMaster Limit Nut

Limit nut / cam for commercial door and gate operators

RP-SW-LIMIT

Lynx Limit Switch for old model 455

Limit switch for old Lynx 455 with metal cover

H14G04

Hinge #4 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#4 position
Use between sections 4 and 5
Same as part number 244

.......more details

RADIO-22

Manaras MT3-1000 3-btn transmitter 313 MHz

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
To extent of inventory replaced by RADIO-EM903

Programming Instructions

STATION079

Manaras 3-btn Push-Button Control Station with Key Lock-Out Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.
Schneider Elect. part no. XALD04H7

Connection instructions

7470.115

Whiting Side Seal for insulated doors 115" Long

Fits Coldsaver and Tempguard

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

HAE00004

Linear Limit Switch Assembly

For LSO LDO LCO

1006-1-3/8-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

25-42-120

Extension Spring 7' Door - 120 lbs Green

Double - Loop
25" long 42" stretch 120 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-50

Extension Spring 7' Door - 50 lbs Red

Double - Loop
25" long 42" stretch 50 lb load
Sold individually
Rated for 10000 cycles
Same as part number 105

Spec Sheet

26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

Seal molded from long lasting rubber
Cross Reference: T #69718 630300

26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Maximum Door Height: 32'-1".
Rated Lift per Drum: 1000 lbs.
Max Cable Diameter: 1/4".

.......more details

DM413

Cable Drum Standard Lift 12' 400-12 Pair

12 ft Standard lift cable drum. Aluminum die cast alloy.
Max. door height: 12'-1".
Rated lift per drum: 375 lbs.
Max. cable diameter: 5/32".
Mounting: 1" tube or solid shaft with 1/4" keyway.
Cross references: D400-144 DNS 4-13 OMI 2100. 3/8"-16 x 2" hardened cup point set screws installed with red heads. Color coded (red=LH black=RH)

.......more details

25-10200

Truck Door Top Bracket Assembly for Todco Roll-Up Doors

Steel construction Zinc plated
Heavy-duty design
Assembly includes: Base Slide Bolt & Washer
Cross Reference: T #69433 W #4039

25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #2996 T #70224

4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

Fraba DW3S-300 air switch 10008797-2
Normally Open Contact (NOC)
Screw Type Connector
Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
Housing: ABS Switch: PA6V0 Nema4
Normally Closed Contact achieved by adjusting the sensitivity screw

.......more details

Operating Instructions

LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

Replacement for LIMIT003
2x SPDT - Unimax
Same as Doorlec # 21702

Limit Switch Chart

1003-1-5/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

CB18B0500

Cable 1/8" 7x19 500' Galvanized

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs

Comparison charts

BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

Replaces BRAKEPART017
To use on brake drums with edges (DRUM004)
New part number is BRAKEPART019KIT

Installation Manual

SLT2-22

Rolling Steel 2" Crowned Slat 22-ga Galvanized

.331-514-R

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

LB910-36

Laminated Bumper Standard Black 10" x 36" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

.273-3-3/4-LH-C

Torsion Spring .273 x 3-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .273 ID: 3-3/4" Length: 12 ft

233817

Operator Reinforced Bracket 18-24" Adjustable with Hinge Kit Galvanized

Also known as ARB or ORB brackets
Kit includes: 5/16" Clevis Pin Hitch Pin 1/4-20x5/8" Carriage Bolt 1/4-20 Serrated Flange Nut
Hinge : Male Hinge 13 GA WIDE SD (MATERIAL STEEL 13 GA)

S3HD-2

Coaxial Splitter 2-Way Female to Female Type F

A practical and efficient solution for dividing a signal from a coaxial source into two separate channels
Its careful design helps minimize signal losses thus ensuring optimal quality on each output
Frequency: 5 - 3000 MHz
Special order item price may vary depending on availability.

31373-114

Doorlec Sprocket 60B36 1-1/4" Bore

RSH-6814-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

AUXREL

LiftMaster Auxiliary Relay Board MAXUM TDC

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

XF208VAC7

LiftMaster 208V Transformer Kit 700

SEF2420

Erone Adjustable Infrared Photocell

Adjustable lens 180° right to left and 40° Top-Bottom
Range 20M (66ft) in all conditions
Adjustable Sensitivity
Power supply 12/24 Vac/dc
Operating temperature -20/+55 °C
Dimension: 90 x 60 x 60mm (3.5 x 2.4 x 2.4 inches)

.......more details

BCSI-PM504

Pivin Drapeau Limit Shaft Kit BCSI Gate Operator ** Price by Quote Only

Includes: Switch Shaft Bearing Plate

HSLG-111

Linear Commercial Slide Gate Operator 1 HP 115V 1 Ph - Heater not Included

Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
Integrated warning beeper during gate movement
15 diagnostic LEDs on board for ease of setup and troubleshooting
Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
On-board APeX Controller three-button control station

.......more details

OPH-6112-M-N1-LH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

689-LCN

LCN Door Closer 4040-XP

Cast iron cylinder with full-complement bearing
3/4" diameter piston
Double-heat treated steel pinion journal
All-weather Liquid X fluid
LCN Patented Green Dial spring force indicator
Universal non-handed

.......more details

GDI-LG930

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

4041-LCN

LCN Door Closer

VKP1-LM

Special ends 2023-11-30

LiftMaster MyQ Video Keypad

Create unique PIN codes and schedule access for family guests and service providers
Visual Confirmation: Get peace of mind by seeing that loved ones have arrived home safe and sound
Receive real-time notifications and view history of when the garage has been accessed by members of the household
Easy Installation: Enjoy wireless setup with a rechargeable battery and integrated Bluetooth® for fast Wi-Fi® provisioning
Call Button: Unexpected visitors can initiate 2-way audio communication with the myQ account owner to request access
Compatible with LiftMaster Chamberlain Craftsman AccessMaster and Raynor garage door openers made after 1993

.......more details

ETBH-353-1

Doorlec 1 HP 575V-3Ph Trolley OP

GHW-353-1.5-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1.5 HP 575V 3P with Nema4 modification

With DC2000 logic board
Worm-Gear Jackshaft type Industrial operator NEMA 4/12

1440-1-3/8"-WHT

Elton Residential Window for Flush Doors 1-3/8" thick 1440 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 42 5/16” x 14 1/4"
Cut-out size: 41 11/16” x 13 11/16”
Vision area: 39 11/16” x 11 5/8”
Different glass options and frame colours are available upon request

.......more details

18T

Skylink 2-Button Keychain Remote Rolling Code

Compact-size dual button transmitter can operate two garage doors with 18R Garage Door Receiver
Alkaline battery included. FCC/IC approved.

K41-0346-000

LiftMaster Transformer for INSL24UL

Transformer Replacement Kit. Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators

84602

LiftMaster Chain Drive DC Dual LED Residential Opener

Integrated Dual LED Lighting System Reliable Chain Drive®
Motor: 12V DC 53 RPM automatic thermal protection
Power: 120V AC 60 Hz voltage 6A current rating UL Listed 4' power cord (3-prong)
Speed: 7.2" per second upward 7.2" per second downward
Lighting: Dual light lens LED - 1500 lumens
Included is the 893LM (3-btn remote) 882LMW (Multi-Function Wall Control Panel) The Protector System® Safety Reversing Sensors

.......more details

312964

ODCC Adjusting Wheel 8" OD 1" Bore

CT753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 with Carwash Mod

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
This operator comes with the carwash modification already installed

.......more details

VSA-5

Electrical Vehicle Treadle Switch 24VAC 5ft Long Black/Yellow

Exterior Electrical Vehicle Treadle Switch
5 Ft Length
Device activates bells lights and other devices by exerting force on top
In protective housing with ramped edges
24VAC
Yellow/Black in colour

.......more details

7-6135

Richard-Wilcox 1x#31 Rail Support

Used with #461-0004 track

OSH-6213-CONT-LH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

GH-383-1

Doorlec Industrial Gearhead Door Operator 1 HP 208V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

K75-37556

LiftMaster Drive Shaft Kit SL595UL

Idler shaft sprocket chain and chain links

2200-294

Linear Plate Sprocket 41A36 1" Bore

RCB-60100

Roller Chain Break #60 thru #100

N4GH751L5-RH

LiftMaster Gearhead N4 w/Watertight/Oiltight Mod. and Brake 3/4HP 115/230V 1P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

2100-258-UPS

Linear Tension Bolt UPS 1/2 Chain

Used on various Linear Gate operators

6070H

Genie Residential Wall Mount Jackshaft Opener

New wall mount style clears up headroom by eliminating rail & powerhead from ceiling.
Patent-pending slack cable detection technology helps insure safe door travel.
15-Year Limited Motor Warranty
Bright LED light fixture provides ample glowing light with flexibility to place fixture wherever desired in the garage.
Includes door lock
Pre-programmed remote is ready to use out-of-the-box. (Simple steps to change programming if desired.)

.......more details