Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Garage Door Commercial Door & Gate Operator Accessories Misc Garage Door Dock & Gate
RP-3002

Rubber Plug 1/2"

  • To plug end of 3002 gum hose
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

  • Nema 4
  • 3-wire air switch; 1-NO and 1-NC contact
  • Mosley
  • NO contact on Yellow and Green
165-A

Fusible Link For Loads 1 to 30 lbs

  • Length is 2.625" width is .875"
  • Distance between centers is 1.75"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
HA-3001

Hose Anchor for Treadle Hose

  • Made of cast iron
50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

  • 3- wire 18-gauge
  • Also called Reel Cord
REEL-20

Devanco Take-Up Reel 2-Wire Metal 18-ga 20ft Black

  • 18-gauge
  • 20 ft extended
  • Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
  • Also called Reel cord
  • Comes with reset button for CSA conformity
QUICK_CLOSE

Commercial Quick Close Device / Universal Timer V8

  • This device will automatically close the door as soon as the vehicle passes through the safety beams.
Wiring InstructionsMonitored connectionNon-monitored connection
Z9964

Maxum HD J2200 Operator Mounting Bracket

  • Compatible with 2200lb capacity Liftmaster® Maxum operator only
  • Accommodates torsion shafts from 1" to 1 5/8"
  • No spreader bar required
  • Comes with: (1) An Operator Bracket (2) Support bearing plates fasteners (2) 1 1/4” ID Football Bearing
Z9961

Maxum Operator Mounting Bracket 700-1200lb Ops

  • Compatible with MAXUM® Jackshaft operators
  • Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
  • Precise chain tension adjustments through the adjustment bolt
  • Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
  • Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
  • Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation
    • .......more details
Installation Manual
Z9962

Standard L5 Operator Mounting Bracket

  • Standard Jackshaft and Hoist Operator Bracket
  • Compatible with most Liftmaster® Logic 5 Genie and Overhead Door Brand Jackshaft and Hoist operators
  • Accommodates torsion shafts from 1" to 1 1/4"
PBT-3

Exterior 3-Btn O/C/S Control Station Nema 4 Metal Enclosure

  • Surface mount
  • Metal enclosure
  • Not CSA approved
  • Dimensions: 6" H x 2-3/4" W x 3-1/2" D
02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red Part # XALD03H7

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure part # XALD03H7
Sell sheet
P-50H

End Plug for 1/2" ID Rubber Air Hose w/ Center Hole Qty 1

  • Sold per plug
C184-24B

Coil Cord 4 Wire 18-Gauge Black Extends 24ft

P-75

End Plug for 3/4" ID Rubber Hose

  • Sold per plug
WPS-1H-110V

Wall Pull Switch with 110V Heater

  • Wall Pull Switch Nema 4 Momentary Contact
  • Made of Aluminum DieCast
  • Equipped with a bronze sleeve bearing which provides smooth pull down actuation.
  • Cast Aluminum rotating cam allows for 360 degrees rotation and pivots downward 30 degrees off vertical from any direction.
  • Designed for industrial doors and fast moving lift truck operators.
  • Two 3/8" plugged holes on top for ceiling mount ( remove plugs for ceiling mount)
    • .......more details
NTE5326

Bridge Rectifier 25A 600V

  • Bridge Rectifier Converts AC to DC voltage
  • For powering DC accessories when AC transformer present
  • Small size with convenient mounting hole in center
  • Same as MCCM2506-RH
Characteristics
G3243

GDI Battery Backup Option G3243

  • BBU option if AC power is lost
3EBX

Explosion Proof 3-Btn Pushbutton Control Station

  • Not rated for division or class
  • Three button O/C/S Nema-7/9
  • Surface mount
  • Dimensions: H=6-1/8" x W=3" x D=4-3/8"
Specification Sheet