Devanco Canada - Get The Right Garage Door Opener‎ and Parts

02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

Code on key is #301

LM21XPBB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting

.......more details

Installation Manual

36350

Doorlec Reversing Time Delay 1.5 sec. 24VAC

In closing cycle door will stop for 1.5 seconds and reverse to fully open

22405-KEYLOCK

Doorlec Weatherproof Pushbutton O/C/S Key Lock with On/Off Switch

PBTL-3-102

Key ONLY for PBTL-3 Z102 Sold per Key

Cut Key # Z102
Price for 1 key

PBTL-3-100

Key ONLY for PBTL-3 Z100 Sold per Key

Cut Key # Z100
Price for 1 key

RP-3002

Rubber Plug 1/2"

To plug end of 3002 gum hose

165-B

Fusible Link For Loads 1 to 10 lbs

Length is 1.4328" width is .563"
Distance between center is .938"
Priced per each
Fire rated at 165 degrees Fahrenheit

165-A

Fusible Link For Loads 1 to 30 lbs

Length is 2.625" width is .875"
Distance between centers is 1.75"
Priced per each
Fire rated at 165 degrees Fahrenheit

IS40P

BEA Presence Sensor

Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
Equipped with 9 pre-programmed pattern configurations for various industrial applications.
Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
Mounting height: 8-16'
Detection field: 10'x10' at max. mounting height of 16'

.......more details

Installation manual Sell sheet Cut sheet

BEA-10-FALCN-XL

BEA Falcon-XL Motion Detector Mount under 11'5"

Same features as the Falcon detector but made specifically for extra low mounting
Mounting height between 6.5' and 11.5'
Detection zone: 13'x6.5' at 8 1/5'
Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor.
Sensor also has the ability to differentiate between pedstrians and vehicles.
Available remote makes it easy to make adjustments to all key parameters of the sensor while at ground level.

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

3BXT

Control Station Exterior Surface Mount O/C/S N4 Non-Metallic

Double pole contacts
H=5-3/4" W=2-3/4" D=2-1/2"
UL Listed CSA Approved

AIRSWITCH009

Exterior Mosley Air Switch SPDT Plastic Housing

CPS-U

LiftMaster Commercial Protector System Eyes

For LiftMaster Logic 2 3 4 & 5 commercial operators only
NOT for outdoor applications
Allows activation of the timer-to-close
Mounting hardware included
Sensing distance of 30 feet
CDO 2010 Ready

.......more details

Installation Manual Manuel d'Installation Sell Sheet

DCWALLCTL

LiftMaster Floor Level Wall Controller with LCD Display

Compatible with LiftMaster MAXUM Commercial Door Operators.
4-line LCD display gives you access to more information at all times
Bringing programming troubleshooting and Diagnostics down to the floor level will save you time and money
Menu based user interface allows you to scroll through edit and save options and settings easily.
Dimensions: 3.586” W x 8.166” H x 1.732” D

MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
Output: N.O. N.C
Wire connections: Integral 18” wiring with #6 spade lugs
Antenna: Attached wire or F connector
LED Indicators: Power channel 1
Polycarbonate enclosure

.......more details

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

For 2-wire edges
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-NR-1

Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
Easy to wire terminal strip
Plug-in replaceable outputs
Range: 40ft
Power: 24-240V AC/DC
The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.

.......more details

Wiring Diagrams Sell sheet

306839

Bircher Hercules 2s Microwave Motion Sensor for Industrial Doors

Two completely independent programmable outputs for endless application scenarios
Highly flexible program settings utilizing both outputs are now easier to program
23' (7 m) long cable for maximum installation flexibility
6-wire cable using traditional wire colors & thicker wire gauge for easier installation
Pulse on exit feature
Differentiation between pedestrian and vehicle traffic

.......more details