Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

RELAY021

Manaras Socket Base for Loop Detectors ZPD11

  • 11-Pin base
LA400PKGUL

LiftMaster Residential 24V DC Swing Gate Operator All-In-One UL325

  • LED DIAGNOSTIC DISPLAY Simplifies installation and troubleshooting.
  • WIRELESS DUAL-GATE COMMUNICATION Eliminates expensive conduit costs and unsightly driveway scars.
  • BI-PART DELAY Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
  • SYNCHRONIZED CLOSE Simultaneously closes gates. WITH OPTIONAL EXPANSION BOARD
  • PROGRAMMABLE AUXILIARY RELAYS Easily add additional features such as warning lights/alarms.
  • ANTI-TAILGATE Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up gate will continue to close.
  • .......more details
LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

  • Secondary Arm Only for LA400
  • All new arms are backwards compatible with the previous model but the LiftMaster branding is different
BGARM12

LiftMaster TECHNA Barrier Gate Arm 12 ft without LED

  • 3” Aluminum arm with integrated LED lights channel designed exclusively TECHNA barrier gate operators
  • Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
  • Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
  • The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle. Additionally it is compatible with the S50L a wireless edge safety device.
  • (Optional) LEDs are easily installed by sliding them into the arm's center channel and securing them with the included press-in clip
  • IP68 rated waterproof LED lights
  • .......more details
K76-38732

LiftMaster Electric Motor 24VDC for HCT UL325

Q003

LiftMaster Chain Tensioner Bolt w/2 nuts K07-50637

  • This replacement kit is most commonly used to tighten the attached chain on the sliding gate
VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
  • .......more details
K1D6597-1CC

LiftMaster Control Board with Heat Sink CSL24V & CSL24VH

  • Control board for CSL24V and CSL24VH gate operators
  • 014D1058M
F310

Linear GTO Digital Keypad (Wired or Wireless)

  • As a wired keypad it can operate garage door openers and gate openers that require 24 volts or less and accept normally open contacts.
  • As a wireless keypad it can be used with any gate or garage door opener that receives a 318 MHz RF signal.
  • The keypad must be used in conjunction with the GTO garage door receiver kit (part # RB709) on any other garage door.
  • You may program up to 25 different personal entry codes allowing you to give different entry codes to different users
  • After entering a valid code pressing any key while the gate is opening will stop the gate; pressing any key while the gate is stopped and the gate will reverse direction.
  • The keypad will not affect the auto-close setting of your gate opener system.
  • .......more details
K1D8389-1CC

LiftMaster Main Board DC Pad Mount for UL325

  • This replacement board is compatible with the following models: CSW24U CSL24U RSW12U and RSL12U
  • Also compatible with HCTDCU and HCTDCUL Overhead Gate Operator
  • Same as 001D9039-1CC
K94-37236

LiftMaster Universal Solar Harness Kit

  • For 7 Ah and 33 Ah batteries
K10-34758-2

LiftMaster Battery Tray CSL24U

  • For use with CSL24U
  • Also known as: K75-34986-2
A123300SGLPK

LiftMaster Battery w/ Harness Single 33AH 12V

SP20W12V

LiftMaster Solar Panel Kit 12V 20 Watt

  • Includes mounting bracket and hardware with 10' cable
K20-3050M-5

LiftMaster Electric Motor 1/2 HP 575V 3Ph BM/CF

  • Also known as: K20-3050M5 20-3050M-5
  • For use with various LiftMaster® 3-Phase 575V Gate Operators and Perimeter Access Solutions
MA001

LiftMaster MA & MAT Control Board (K79-60166)

  • Electronic board for barrier gate operator
  • Same as K79-60166
  • Can be used in various Autogate Operators
Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

  • Compatible with various LiftMaster® Swing Gate Perimeter Access Systems
Q104

LiftMaster Standard Arm Assembly CSW24U/RSW12U (75-50293)

  • Also known as: Q038 75-50293 K09-50104 Q040
KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
  • .......more details
G71-26438

LiftMaster Timer-to-Close Factory or Field Install

  • Compatible with models VSL595 BG770 and BG790
  • Provides an adjustable timer in the operator control circuit which will close the gate automatically after the preset adjustable time interval
  • May be factory or field installed
  • Same as 71-26438 G7126438