Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 2 HP
MWR12

Miller Edge 1-Channel Receiver RF 318 MHz *** To Extent of Inventory

  • The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
  • Power requirements: 10 to 40 VDC 10-30 VAC
  • Output: dry relay contact N/O and N/C 1A @60VAC
  • Operating temperature: -40C to 60C
  • Maximum operating distance: 100ft
  • Electrical configuration: optional N/O or N/C
  • System response time: transmitter input to receiver
  • Two year warranty
  • For 2 wire edges
  • Replaces the MWR02A
Installation ManualSell Sheet
DR-312

Linear 1-Channel Delta3 Receiver 312 MHz - DISCONTINUED

  • 312 MHz frequency 8 dip switches for coding 256 possible codes
  • 24V AC/DC input power 3 terminal connection
  • Activates one device
  • Dimensions: 5.5" W x 4" H x 1.25" D
  • Same as: DNR00001
Programming Instructions
MOFT20-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Transmitter

  • Maximum sensing distance is 20 meters
  • 11-pin
  • Waterproof for harsh environment i.e. water dust steam etc.
  • To be used with amplifier series S142.
  • Supplied with 15 m of shielded cable.
  • For receiver unit order part no. MOFR-M14-8.
    • .......more details
Installation Manual
19-48047M

LiftMaster Roller Chain #48x47

  • #48 x 47 pitch with master link
  • Internal reduction chain
  • Length is 24"
PEDALU42

Aluminum Pedestal Post 42"

  • Pedestal post with hood
  • High quality aluminum
  • 42 inches
  • Dual face-plate allows for easy wire connections
Spec SheetShop drawing
GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts
829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

  • This innovative monitor lets you check and close the garage door or gate from any room in the house.
  • Green and Red LED lights indicate whether the garage door or gate is open or closed.
  • Volume controlled audible alert lets you know when the garage door or gate is being opened.
  • Able to monitor and close up to four garage doors or gates.
  • Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.
Programming InstructionsInstructions de programmation
T-53-S

FL-Allstar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

  • This remote can control (open-close-stop) up to 27 doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 535T (190-107475)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8"
Programming Instructions
MK00488

Micanan Electronic Circuit Board Monitored

  • Replacement board for PRO-LH (50-11)
  • Board has terminals P1 & P2
  • Up to 20 transmitters can be programmed
Instructions Manual
RADIO-29

Manaras Commercial Receiver Antenna

  • Commercial receiver coaxil antenna
DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

  • 1-Channel Gate Receiver
  • High-sensitivity short-range radio receiver
  • Operates in conjunction with the 9-inch local antenna (supplied).
  • Designed for use with automatic gate operators or systems where a remote antenna is needed.
  • Same as: DNR00013P
Installation Manual
BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .3750 - .4305
1104-18FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 18' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
  • Full case quantity only (12).
H11G03

Hinge #3 x 11 gauge

  • 11 gauge # 3 hinge - 0.72 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

  • 6" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
41A2817

LiftMaster Drive Gear and Worm Kit (No Sprocket)

  • Also known as: 081B0045 062216 081C0179 81B45 2612159
Installation ManualManuel d'Installation
19-50106M

Chain # 50x106 (5-1/2') with Master Link

  • Also known as: 350120 199023
  • 106 links
37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

  • For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)
KPW5

LiftMaster New Wireless Commercial Keypad 5-Code Sec.+2.0

  • Designed to work exclusively with Security+ 2.0
  • 5 permanent PINs and 10 unique temporary PINs ideal for residential and small commercial applications; unique temporary PINs can be set for 1 to 9 uses
  • Allows for removal of a single PIN while maintaining full access for other users
  • High-impact polycarbonate front cover; perfect for rugged outdoor environment
  • Blue backlit metal keypad makes it easy to use under low-light conditions
  • Electronics are fully sealed and meet NEMA 4X water protection requirements
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochureCompatibility chart
BSG115-LED

Devanco Stop and Go Light Black Housing 115V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
  • Made in Canada
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
MCT-11

Linear 1-btn MegaCode Transmitter 318 MHz

  • Activates one 318 MHz MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
28412

Doorlec Flange Bearing 5/8" Bore Oilite Bushing

  • Works on GH/GHX
HTR120NC

LiftMaster Heater Kit for Maxum

  • Allows for operation in extreme cold environments effective for ambient temperatures down to -31°F (-35°C)
  • 120volt input power. standard 120V outlet required
  • Can be added easily in the field
  • Not for damp/wet environments
BEA-35-1555

BEA 50' of Cable Only for LZR Widescan

  • Optional 50 ft cable for use with the LZR-WIDESCAN
P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
TSTL

EMX Test Loop

  • Electrical diagnostic tool for loop and vehicle detectors
  • Two-wire: red and black
  • Dimensions: 1.25 inches (H) x 1.25inches (W) x .75inches (D)
  • Compatible with most brands of loop detectors
HSLG-111

Linear Commercial Slide Gate Operator 1 HP 115V 1 Ph - Heater not Included

  • Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • Integrated warning beeper during gate movement
  • 15 diagnostic LEDs on board for ease of setup and troubleshooting
  • Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
  • On-board APeX Controller three-button control station
    • .......more details
PCBA-PD3.3

Dyna Hoist/Pulse Replacement Drive Board for DC500-100

PHOTO-060

Manaras Non-Monitored Photoelectric Cells N4/12 & IP67 Retro-Reflective 39' Range incl 3" Reflector

  • Retro-Reflective photo cell
MV-00025-NEW

Micanan 32-Door O/C/S Transmitter CT-32 313 MHz New Style with Flat Buttons

  • Commercial / Industrial transmitter
751-CDN

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) Canadian Steel - 1000/Bag

  • 7/16" Head
  • Indented hex washer head
  • Max RPM = 2000
  • Made in Canada with Canadian Steel
OE-LHR-SET

Low Headroom Quick Close Device 2" track Sold as a Pair

  • Includes 1 RH & 1 LH bracket
  • Steel with zinc plated finish
  • Set includes: 1 x fastener bag 1 x stop lip bracket (L&R) 1 x LHR roller holder (L&R) and instructions
  • Used on torsion or extension spring doors up to 8'H
  • Operate extension spring doors in a minimum of 7" of headroom
  • Door won't go higher than top of spring shaft when door is opened.
    • .......more details
Installation diagram page 1Installation diagram page 2
GH-383-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 208V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
EHJW-311-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 120V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
02-101

LiftMaster Single Button Nema-1 Pushbutton Control Station

  • Surface mount
AHB-716

Adjustable Hinge Bracket for 7/16" Roller Shaft

  • Mounts on the #1 hinge to make the hinge adjustable from #2 through #13
  • Eliminates the need to stock odd size hinges
  • Works for 7/16" shaft diameter rollers
PHOTO-075

Manaras Non-Mon. Retro-Refl. Photo Cells Exterior 24V IP67 0.5-32' Range.

  • Non-Monitored reflective Photoelectric manufactured by Sick
Manual
10.1003.11

Whiting Step Bolt 1/4"-20x 1-1/2"

  • Used with keps nut #796 - sold separately
  • Ideal for installing hinges on dry freight doors
RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.69"
  • Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)
ERN

Erone 4-Channel Transmitter 433MHz

  • Innovantive and extreme crashworthiness
  • Casing: aluminum and black polycarbonate
  • Range (line of sight): up to 250 m (820 ft).
  • Dimensions: 70 mm x 40 mm x 10 mm (2.75 in. x 1.57 in. x 0.4 in.)
  • Comes with: One lithium battery (2032)
  • Optional 26-bit Wiegand proximity tag built-in: ERN (old #S7TR2641E4T (HID) old # S7TR2641E4M (Mifare)
    • .......more details
Wireless System Chart
60-6560-C-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Concrete *** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
7205

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors for #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
MTR3

Linear 3-Channel Visor Transmitter 318MHz ** To extent of Inventory

  • Activates three MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Visor clip mounts vertical or horizontal
  • Power: One 2032 battery
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming instructionsInstructions de programmation
FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz

  • Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
  • Contains 10 DIP switches inside for coding.
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
30001

Doorlec Brake Solenoid 575V with wire leads

1004-2-12'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 12 ft***Actual Length 12'2"***

  • For door thickness 2"
E/BLOP/276

Automatic Systems Audible Alarm for BL229

LMHS2475WPADA

LiftMaster Horn / Strobe 12/24VDC White W/NO

TN29C

Wire Nuts (Marrette) Grey 22-14 AWG 100/Pkg

  • Screw-on connector
  • Wire Range: 22-14 AWG (Max = 1 x 14AWG wire with 1 x 20AWG wire & Min = 2x 22 AWG wire)
  • Rating: 105C (221F)
  • Voltage: 300V
  • Approval: CSA UL486C Listed
.421-514-L

Cut-to-Length Torsion Spring .421 x 5-1/4" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
ALUM-532

Aluminum 24" x 100' Spool Almond / Amande # 532

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 532
  • Reverse side is #431 Bright White
Colour chart
172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

  • Wall mounting
  • 4:1 reduction
  • Maximum pull allowed on hand chain is 35lb
  • Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch
Sell sheet
MM00015

Micanan Solenoid Lever Gearhead (MSI0031)

15480

Doorlec Heater Strip 175 W 575 V

HINGE-211-PCG

Powdercoated Hinge #2 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #2 - 0.71 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
CABLE_364SS-250

Cable 3/64" 7x7 250' Stainless Steel

  • Not for use in aircraft applications
  • Type: T304
LIMIT023

Manaras Single Limit Switch with 46 degree Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
SL-310T-2

Skylink 2-Btn Visor Mount Transmitter 310 MHz ** No Longer Available

  • Easy to carry or clip on sun visor.
  • Works in conjunction with Skylink Universal Receiver: Model SL-310R.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
RS1311

Roller 3" Steel 11" stem Precision Bearing

  • Steel Roller Wheel diameter: 3" 11" stem length 7/16" stem dia
BD3240

Piezo Warning Buzzer Alarm with Volume Control 24VAC/DC

  • 2-1/2" long 90 DBA
CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

  • Same as Garaga CF101
CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

  • Same as Garaga CF101
MD00420

Micanan Flex Coupling Lovejoy 3J x 3/8"

MCB-421-CONT

Lynx Heavy-Duty Chain Drive Trolley 3/4 HP 220V 1P Contactor Model

  • Heavy-Duty spur gear chain drive trolley
37302R

Genie C-Channel Belt Extension Kit for Silent Max and Quiet Lift models ** Price by Quote Only

  • The extension kit for C-channel belt drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door
  • For Genie silent max 1000 and quiet lift 1200 belt-drive garage door openers only
MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

  • SPST
  • 2 mounting holes
  • Dimensions: 2.375 x 0.875 x 0.75 inches
  • Color: Light Gray
  • Intended for indoor use
RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation manualManuel d'installationSell sheet
220315

Allstar Challenger Gear & Sprocket with Bushing

.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

  • Spring wire only. Cones and Filler extra
L-4-18-0-M

Cable Tie Standard 18 LB Black 4" Nylon 1000/pkg

  • Length: 4.12" / Width: .095" / Thickness: .042" / Diameter: .875"
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
MEA2

Nice Key Unlock System for Older Metro Gate Op.

  • For underground gate operator
  • (1) MEA2 KEY UNLOCK SYSTEM (2) KEYS- METROPLEX & BIG METRO
  • Does not work on the newer systems. For newer Big Metro use BMA3 lever type release
3950-41DS

LiftMaster Dead-Shaft Sprocket Kit for 3950

  • Used on doors without live shafts
  • Same as 41A7280
  • Includes #41 chain sprocket
Sell sheet
XT2564-CUT

Xcluder Rodent Block 4" Black Sold per Foot

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
PRO-APTB-5011-R

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake Contactor

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
Installation manualSpecification sheet
MX00140-NEW

Micanan Brake Assembly for PRO-TB/APTB NO Solenoid - New Model (SBR-N1-00-TTBPAPT)

CP-LX720

Lynx 3-btn O/C/S Transmitter 372 MHz for Commercial Op. with UL325 Board

  • UL325
  • Works on the new Lynx commercial operators
  • Open Close Stop transmitter
  • Not compatible with the 372MHz residential operators.
Programming instructionsCompatibility chart
MALED12

LiftMaster LED Barrier Arm 12 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

  • Galvanized cable 3/16" 7x19 500ft spool.
  • Cable break strength: 4200 lbs
  • A higher quality cable compared to the Chinese cable
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4

  • Standard 1/2 hp motor
K-T5011L4

LiftMaster Electrical Box Replacement Kit L4 K-T74-33015-1 ** Price by Quote Only

  • For models APT T SD 115V 1Ph L4
DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
    • .......more details
Programming InstructionsInstructions de programmationSell SheetWireless System Chart
MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

  • The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.
    • .......more details
Installation ManualSell Sheet
B025

Rolling Steel Assembled Angles 2" x 2"x 3/16" Sold per Foot

  • Includes angles astragal and 1/2 slat
EAST/STL-E3

Rolling Steel 3" Cast Eastern Steel Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
BK313

Jamb bracket J-13 #13 12 gauge

  • Sold by the piece
  • Height 5.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
MOD050

Manaras Friction Clutch Mod. #50 Chain Gear Head Operators

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to OGH and MGH operators
    • .......more details
20418R

Genie Limit Switch Lead Wire Brown

  • Brown - Used to connect down limit to sequensor
  • For Screw drive models
AK-21

Linear Interior Digital Keypad***to extent of inventory

  • The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
  • It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
  • The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.
Installation Manual
SSZP10-6

Solid Shaft 1" Keyed Zinc Plated 10'-6"

CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

  • The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.
Programming Instructions
RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 75
719323

FAAC Steel Rack for Model 844 Operator

41AC075-2

LiftMaster Circuit Board Assembly for Dual Capacitor Models 315Mhz ** To extent of inventory

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
  • Also known as 41AB075-2 41AC075-2 041AC075-2A
02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

  • Outdoor Surface Mount Nema 4/12 station
  • Standard key cylinder is replaced with BEST cylinder
  • Open/Close spring return to center (off)
  • Key removable in center position only
  • With Stop button
UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
PED4272

Pedestal Post 42" & 72" Dual Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with 6 in. center radius giving a tight professional look
PRO-HHD-5011R-R

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Right Hand (PRO HHDR)

  • 1/2 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation manualSpecification sheet