Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Brush Insert
39438R

Genie Garage Door Opener LED Bulb LEDB1-R 1/Pkg

  • Unlike other LED and CFL bulbs this bulb will reduce or eliminate radio frequency interference
  • Uses 10 watts but equivalent to a 60-watt bulb
  • Works with almost all garage door openers
  • Lasts up to 25000 hours
  • Shatter-resistant vibration-resistant
  • Cold weather rated up to -30C
  • Damp location rated
C-24X12-134-W

Thermal Window 24" x 12" for 1-3/4" Cedo Door White

  • For 1-3/4" thick door
G-21X13-134-W

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door White

  • For 1-3/4" thick door
2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

MIRM-T2

Miller Edge Patriot 2 Photo Eye Monitored 30ft Non-Contact ** NLA

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
    • .......more details
PRO-LH-5011R-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Right Hand (PRO LHR)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • No longer available in contactor model (2017)
Installation manualSpecification sheet
K75-34828

LiftMaster Idler Shaft Kit

  • Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
  • For SL575 SL585 with GL Board
02-409

LiftMaster Key Switch 2-Position Nema 4/12

  • Two Position Key Control Station
  • Outdoor Surface Mt. (NEMA 4/12)
  • Tamperproof
  • Die cast metal enclosure with standard key cylinder
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
  • Dimiensions: 3" x 3.2" x 4.2"
    • .......more details
41AC150-1M

LiftMaster Electronic Circuit Board Assembly 315 MHz *** NLA Repl by 41AC050-1M

  • For Sears / Craftsman garage door opener
TILT-5

Tilt Detector

  • State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
  • Safeguards against rolling steel door failure where conventional devices miss
  • Automatically stops the operator to keep door within safe parameters
Sell sheet
SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
    • .......more details
7001-12-CHARCOL

Commercial Side & Top Weather-Strip 12' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7-28-1A

Lynx Standard Barlock Kit Bars sold Separately

  • Bars are sold separately.
  • Hardware bag for doors 12' and under
Assembly Manual
MS001

LiftMaster MSL & MSW Control Board (K79-60142)

  • Replacement logic board for the Mega Slide and the Mega Swing gate operators.
  • Can be used in various Autogate Operators same as AG001
K72-13059

LiftMaster Output Shaft Kit APT

  • Kit contains: Shaft Bearings Roll Pins Washers and Sprockets (41B10 x 3/4" & 41B16 x 3/4")
6976.182.23.440

Whiting Single Spring Balancer Assembly .182 x 23" x 44" Shaft

3BXLT

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic

  • Double pole contacts
  • Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
  • Comes with 2 keys
  • H=7" W=2-3/4" D=2-3/4"
220315

Allstar Challenger Gear & Sprocket with Bushing

1104-9FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 9' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
053158

Rotating Beacon 4" Amber 12-110V DC

  • IP Protection: IP56
  • -30 degree celsius to + 50 degree celsius extreme temperature reliability
  • small format only 2.5" wide
28-00190

Truck Door 1" Std Vert. Track and Angle Assbly Curbside (RH) 96.5" Todco Style

  • Fits Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • For door opening less than 90" high
  • Fits door sizes 72 - 90" high
  • Cross ref: T #49014-1 T #41034-1 & W #4046
    • .......more details
3-42-2B

Bottom Bracket with Removable Roller Carrier Commercial 2" & 3" 2-Hole BB-6 Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

  • Sold as a pair (1-left and 1-right)
  • 13-guage
  • Dimensions: 4-9/16" W x 11" H
  • For 1-3/4" door
POCKETWHEEL007

Manaras Pocketwheel Assembly with rollers and clips (Hoist-A-Matic)

  • Includes POCKETWHEEL005 CAM012 and CLIP020
K20-1050B-1RL

LiftMaster Electric Motor 1/2 HP 115V 1Ph BM

  • 1/2HP 115V 1 PH resilient base mount motor with one drive shaft key.
  • Check the manual for your specific model number before ordering to ensure compatibility.
LVB620-11

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
3-32-1

Low Headroom Top Bracket 2" Residential

  • For residential door with 2" track
K72-18615

LiftMaster Drive Shaft Kit

  • Kit includes: Disconnect Bushing Drive Shaft Pillow Block Bearing Sprocket Disconnect Spring Chain Disconnect Key E-Ring.
  • Works with SL595 SL590.
BK021/PR-BOLT

Commercial 3" Safety Bottom Bracket with Bolt Sold as a Pair

  • Maximum cable diameter: 1/4"
  • Maximum door weight: 1650 lbs Zinc
  • Plated Steel
  • Sold as a pair
CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

  • Lead probe ONLY. Requires the CS303-C-1 detector.
  • Easy installation above or below ground
  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Sensitivity display
  • Single cut installation with flat pack model
AK-11-KEY

Linear Key (1) only for AK-11 (2200-884)

  • Replacement Key ONLY qty: 1 only
6X16SC50

Devanco Loop 6' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation manualManuel d'installationLoop placement guideGuide de positionnement des boucles
EC002-277

Automatic Systems Spring Assembly 06/04 for BL27

  • French description: Ensemble ressort 06/04
  • For model BL27 gate operator
HTR

LiftMaster Heater Kit for DC Pad mount Gate Operators

  • Heater kit for pad mount DC gate operators.
  • Includes battery bracket.
  • Protects system to -40° F and installs on operator frame
4690-040

Plate Mount Isolator

  • Vibration and noise isolator
  • Failsafe design prevents the bolt from falling should the rubber break
  • Reduces noise transfer from opener to building
  • Universal design allows for easy installation
  • Accepts 3/8” bolt
Specifications
TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

  • Priced per each
HBS2U

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For 1-5/8"-2" Doors
  • Fits 2" or 3" Track
  • Single End Stile
  • Pins and Cotters
    • .......more details
LDM-1

Long Distance Module

  • Compatible with all door and gate operators that use 24V AC
  • 20 mile range
CHI-SPECIAL

C.H.I. Special Order Door

  • Special order as per customer's requirements
374UT

LiftMaster Universal 2-btn Mini Transmitter

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • This mini remote is NOT compatible with DIP switch remotes or receivers
Programming instructionsSell sheet
1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
37030A

Genie Motor Assembly DC

  • Works with Genie ReliaG 800 2022 2024 and 2042
  • Replacement powerhead motor assembly
FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

  • Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
  • 304L rust-resistant stainless steel
  • 12 gauge
41A4813

LiftMaster Chain Pulley Bracket Kit

  • Fits chain drive models
HBS3U

Stainless Steel Bottom Fixture 3" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For 3" Doors
  • Fits 2" or 3" Track
  • Single End Stile
  • Pins and Cotters
    • .......more details
MD-00034

Micanan Connecting Link #410

MD-00035

Micanan Offset Link #410

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

  • An original Whiting assembly
CP-BRG-1

Lynx Bearing 1"

  • 2 in total on a MCJH
VBELT_5L340

VBelt 5L 34"

  • Fits Lynx HDC operator
29202

Doorlec Transformer 550Vpr 120V sec. 35VA

K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

  • Service kit to connect new LED arm to existing barrier gate
  • Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply
Z9205

Door Scale Arm

  • Counter balance lever arm and a common bathroom scale will allow you to weigh a door up to 1250lbs
  • Set door on shaft and multiply scale reading times 5 to give you the door weight
  • Bathroom scale not included
Drawing
DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

  • Standard features include: 2-cable balancer with independent springs
  • Balancer springs treated with rust preventative
  • All door hardware is E-coated
  • Spring loaded lock catch
  • Heavy-duty 2" 13-gauge track
  • Stainless steel aircraft cables
    • .......more details
MT-1B

Linear 1-btn MegaCode Block Coded Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Operate LED
  • Visor clip included
  • Sold in lots of 10
  • Power: 9-volt battery
    • .......more details
MODKIT013A

Manaras Timer to Close Kit 0s-100h Med-Duty

  • Timer To Close Kit for Manaras Commercial Door Operators with reversing contactor style control box.
  • Includes Timer base and all required wiring
  • Detailed installation instructions are included
Installation Manual
K72-33841

LiftMaster Shaft-Sprocket Assembly Clutch MH

  • Kit includes: Compression spring Cotter pins and Bearing
H101L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Left Hand W/Brake ***No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
SPF514-6

Spring Filler 12 ft Long No Fins

  • For use with 5-1/4" or 6" torsion springs
  • Accomodates both 1" and 1-1/4" shaft size
D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
K75-12586

LiftMaster Complete Brake Assembly GH 575V

  • Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.
Installation ManualManuel d'installation
BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • 02-102 Open/Close Push Button Included
Installation ManualSell Sheet
TR-GUARD

Track Guard Z type 60" high to Protect 3" Track Sold as a Pair

  • Provides impact protection to vertical track
  • 11 gauge (.125 thick)
  • Galvanized steel no paint
26-40410

Truck Door T-Style Standard Side Seal 116"

  • Extruded from long lasting rubber
  • Seal protects cargo area from dirt and moisture
  • Used with standard J channel vertical angle with 1" track
  • Length: 116"
  • Cross reference: T #69840 W #4019 620200
71-B1PH

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for L5 Operators

  • Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators
41A5021-1M-315

LiftMaster Receiver Logic Board with Purple Learn Button *** Discontinued

  • For LiftMaster models: 1345 1346 1355 and 1356
  • For Chamberlain models: CG40D & CG42D
  • Replaces Reciever Logic Boards: 41A5021-1H-315 41A5021-4M-315 41A6135-1A 41A6148-1 and 41A6148-1A
OPH-6112-CONT-L

Manaras Opera-H 1/2HP 120V 1Ph with Mechanical Contactor Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

  • Galvanized cable 1/8" 7x7 500ft spool.
  • A higher quality cable than the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
105104

Linear Gate Safety Edge Transmitter

  • 105104 is for adding obstacle sensing for motorized gates or barrier arms.
  • Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
  • The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
  • Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
  • Activates receiver for stop or reverse entrapment
  • No cables or coiled wires
    • .......more details
Installation Manual
K-T5011L4

LiftMaster Electrical Box Replacement Kit L4 K-T74-33015-1 ** Price by Quote Only

  • For models APT T SD 115V 1Ph L4
LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

  • For use with D-TEK detectors (most commonly used)
  • Hourglass shaped
MD-00030

Roller Chain #40 10' per Pack

22-460

Brake Solenoid 440-460V

  • Used on all brands of commercial door and gate operators
  • same as MK-00028
MK00108

Micanan Telemecanique Contactor 24V for Logic Board with Contactor Interface

  • LC2K1210B7 mini contactor
MO00001

Micanan Cam Plate Compression Spring (.178 ID)

  • 2 required per operator
  • .178 ID x 032G x 55L)
MH00009

Micanan Flange Bearing 1" ID x 2" OD

  • 2 required per operator
MH00001

Micanan Bronze T-Bushing 3/8" ID

  • 2 required per operator
K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

  • Secondary Arm Only for LA400
  • All new arms are backwards compatible with the previous model but the LiftMaster branding is different
Installation ManualManuel d'InstallationSell Sheet
27-20114

Truck Door W-Style Spring Assembly Curbside RHW 35" Long

  • Wire thickness: .187
  • Assembled Spring length: 35 inches long
  • Inside diameter: 2 3/16"
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.
50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

  • Five feet long.
  • OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
  • The weight of the vehicle compresses an electric switch which sends an open signal to the door.
  • Requires a 2-wire connection to the operator but does not require power to function
97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
K001A6039

LiftMaster Control Board for LA400

  • Replaces P/N 127A0071C PN 127A0071F
Installation Manual
MA013

LiftMaster Shear Pin #6 (Standard)

  • For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
  • Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear
10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

  • Transmitter offering means of activation of automatic doors with extended hold feature.
  • Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
  • Operating temperature: -10 to 55C
  • Controls one 10RD433 receiver.
12-19504

LiftMaster Flanged Bearing 1" Keyed

H12G08-SS

Hinge #8 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

  • Double Angle Rails for doors up to 16' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 18' 11"
BRAKE013

Manaras Band Brake Assembly Kit OSH

Installation Manual
MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

  • For 1/3 HP and 1/2 HP operators only
41DS002-2

LiftMaster Electronic Circuit Board Screw Drive Models 3840 *Discontinued*

  • Logic Control Board 315 MHz
  • Compatible with 3840 Screw Drive Purple Learn Button
5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
M005

Rolling Steel Groove Mouth GM6789 Fire Door

285547

Rolling Steel Aluminum Transition Piece Sold per Foot

E076

Rolling Steel Aluminum Bottom Bar 679 Extrusion Sold per Foot