Devanco Canada - Get The Right Garage Door Opener‎ and Parts

12-10882

LiftMaster Copper Bushing

3/4" x 1" x 5/8"

WD-334642

Wayne Dalton Wireless Keyless Entry KEP4 372MHz

Opens your garage door from the outside by PIN-code
Allows garage access without keys
Wireless for fast and easy installation
Can operate multiple garage door openers at once
Rolling code technology
Weatherproof

.......more details

124844

1" Nylon Bushing

DWGK11

Bircher Air-Wave Switch DW40 with N4 Enclosure

Bircher pressure wave switch with connection terminals
6.3mm plug tab in impact-resistant plastic housing
For pressure wave switch series D1 grey housing bottom.
A pressure wave generated by pressing the sensing edge reaches the pressure wave switch.
The membrane deflects and the electric contact switches.
The electric contact remains switched as long as the input pressure is above the response pressure.

.......more details

Manual

JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

Jack Shaft Mounting plastic guide 4.5:1 reduction
Gear drive
Fits 3-3/8" minimum offset
Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
1 chain keeper
2 shaft collars

.......more details

Sell sheet

49563

Stanley Chain Drive Traveler Assembly

Compatible with all Stanley chain drive units from 1982-present
Not compatible with C-Channel models
Assembly includes Traveler 49564 and slider 24851

CPS-U

LiftMaster Commercial Protector System Eyes

For LiftMaster Logic 2 3 4 & 5 commercial operators only
NOT for outdoor applications
Allows activation of the timer-to-close
Mounting hardware included
Sensing distance of 30 feet
CDO 2010 Ready

.......more details

Installation Manual Manuel d'Installation Sell Sheet

LJH-353-1-RH

Doorlec 1 HP 575V 3PH Jackshaft Operator

Model LJH lasts an average of 10 million cycles
Available with ⅓ HP to 1 HP single-phase or three-phase motor and is equipped with self-adjusting solenoid brake
LJH installation is universal regardless of side (left or right)
Speed is approximately 1.4 feet per second or about 0.3 meters per second
Comes equipped with a manual chain hoist

RGL-CTL

LiftMaster Compact Red/Green Traffic Light 12-24V LED

The LiftMaster Hi-Intensity Red/Green LED Traffic Light is designed for use in both indoor and outdoor applications where signaling and traffic control are required.
The Traffic Light puts out hi-intensity red and green beams that are well suited to areas that require a controlled field of view for narrow lane signaling and daylight visibility.
The Traffic Light is compatible with Logic 3/4/5.0 operators that can accommodate the TLS1CARD and RDGRNCARD
Supply Voltage And Current: 15-30 volts DC preferred AC acceptable
Connections: Integral 4-Pin Connector with pig tail
Operating Temperatures: -40° to +50° C (-40° to +122° F)

.......more details

BEA-LZR-WIDESCAN

BEA Widescan LZR Motion Sensor Time of Flight

Should only be mounted Left Hand or Centre Mount
Time-of-flight lazor sensor used for motion safety & presence detection
Offers the benefits of activation & safety while reducing installation time.
Can detect objects based on direction speed object size & height.
The detection field operates independent of ground conditions allowing for superior functionality in harsh environments.
Ideal for replacing costly/labor-intensive induction loop & pull-cord solutions

.......more details

Mechanical Installation Sell sheet

Z9965

Bearing Blaster

Fast and easy way to remove and re-seat bearings into bearing plates
Works for both 1" and 1-1/4" bearings
Instructions included

Instructions

27021

Doorlec Electric Motor TEFC 1/2HP 115/230V DC201

Wiring diagram for 120V Wiring diagram for 230V Motor Replacement Chart

GHW-311-3/4

Doorlec Ind. Duty Jackshaft Carwash Op. 3/4 HP 115V 1P with ECB

With DC2000 logic board
Worm-Gear Jackshaft type Industrial operator NEMA 4/12

SPRAY-562

Aluminum Touch Up Spray Paint 350g Commercial Brown / Brun Comm. #562/462

350g

A01

Lynx Proline Drive Shaft Assembly with Helical Gear

Assembly includes the output shaft and nylon gear

DC7AH

LiftMaster Battery for MAXUM Integrated BBU DC Units 7AH

For use in Liftmaster MAXUM DC Commercial BBU ops
7 AMP
20 cycles when fully charged

89493

Marantec RPM Sensor with Wire Harness

For use on M-line/Q-line/EOS models

041D0605-5

LiftMaster Electric Motor Kit Only DC

Also known as: 41D475-1 062525 41D605-5 041D0605
DC Motor Replacement Kit.
For use with various LiftMaster® Belt Drive Garage Door Openers; manufactured 2001 to 2005. The unit will feature a red/orange learn button.

MA010

LiftMaster Gate Arm Bracket

Designed for use on all Mega Arm gate openers
Bracket will work with either right-hand or left-hand operation gate arm.

Z9963

Donkey Cone Torsion Spring Winding Tool

Converts a standard 4 hole (90°option) winding cone to an 8 hole (45° option) which is especially helpful in low headroom situations
Donkey Cone is a two-piece coupler that securely attaches to a standard 1-3/4” or 2” cone with two fasteners
Made from 60/61 heavy duty aluminum

17350

Doorlec Cable 5ft with Antenna

19-50106M

Chain # 50x106 (5-1/2') with Master Link

Also known as: 350120 199023
106 links

L979M

LiftMaster Wireless Keypad MAX Security+ 3.0

Compatible with Chamberlain® LiftMaster® and most Craftsman® garage door openers manufactured after 1997 with safety sensors.
Easily create temporary PINs for guests.
New and improved seamless set up.
Designed to withstand all weather conditions.
Ultra-secure encryption.
Illuminated keypad and one touch close.

.......more details

Installation Manual Manual d'installation Compatibility Chart 2025 Comparison Chart 2025

1-0316

Richard-Wilcox 22 x 31 Track Bracket Double Zinc Plated

1/2" clearance needed between doors. Maximum door thickness of 2"
Weight: 3.5 lbs
Capacity: 400 lbs 500 lbs
Material: Formed Steel 3/16" thick

Specification Catalogue

41014

Doorlec Emergency Release Spring

Attaches to the wall disconnect leverto put the operator in manual mode in case of power failure

27026

Doorlec Electric Motor TEFC 1.5 HP 115/230V 1P DC203C

General purpose - Frame 56C
1725 RPM for worm-gear reducer models TEFC type

Motor Replacement Chart

50074

Doorlec Flashing Light Option for TCBOD 120 volts can be field installed

Light package with flashing relay

SL595205UL

LiftMaster Industrial Slide Gate Operator 2 HP 575V 3PH with Heater - UL325 ***NLA

3 Phase: 575V is a discrete model without field-selectable voltage.
Includes factory installed heater kit.
P3 MOTOR® high starting torque continuous-duty motor.
Operator Duty Rating: 25 cycles per hour.
Metal frame 7-gauge pre-galvanized steel.
Worm gear reduction 20:1 worm gear reducer.

.......more details

30-94225

Truck Door Bottom Panel w/ Seal & Retainer (15" x 98") Steel Clad White Enamel Finish

1/2" thick (13mm) composite panel consisting of a high density polyethylene (HDPE) core between two galvanized steel skins
Baked on white enamel finish
Black E-coat/powder coat spring assisted steel lock eliminates door bounce
One-piece extruded rubber head seal
Tongue and groove joints
Stainless steel rivets/black e-coat/powder coated components

.......more details

50060

Doorlec Explosion-Proof Pneumatic Edge Kit 12ft Standard. ** ADD ON for Larger Doors

Kit includes explosion-proof air switch air hose plugs coil cord & fittings
Door size needs to be specified when ordering

ACP00942

Linear Control Board for Telephone Entry System AE-100

Board only for AE-100 telephone entry system

RVH-6114-ECB-RH

Manaras Rapido Jackshaft Op.1 HP 120V 1 Ph ECB No Eyes Right Hand

The RapidoTM RVH is a high-speed heavy-duty V-belt drive industrial operator designed for use on vinyl rolling doors as well as rolling bug screens.
RVH offers an opening speed up to 30”/sec while smoothly managing Soft-Starts and Soft-Stops therefore reducing the wear and tear of the complete door system.
#41 or #50 roller chain with sprockets selected for an optomized door opening time.
Electrically activated drum-band type solenoid brake.
All electrical components are in a Nema 1 enclosure. Hinged electrical enclosure cover
6-digit electro-mechanical counter mounted inside the control box counts each complete door cycle providing valuable data for maintenance scheduling.

.......more details

1702LMC

LiftMaster Quick Release Lock

For all vault-type garages
For exterior manual operation
6ft industrial-strength connecting cable
Non-corrosive stainless steel faceplate and spur washer
Extension sleeve for doors up to 2" thick
Positive connection between cable and trolley release

.......more details

1702LMC Manual

CP-SW-TD6A

Lynx Switch Light Delay

For the old Lynx 455 operators

OPJ-6114-M-N1

Manaras Heavy-Duty Jackshaft Op 1 HP 120V 1PH Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

WS-UHF-0-0

AWID Windshield Tag

Adheres permanently inside windshield
Reading distance up to 25'
Secure 1 time use that shows any tampering
Compatible with LR-2000 LR-2200 & LR-3000 readers • Operating temperature: -35 degrees C to 65 degrees C
Operating humidity: 0% to 95% non-condensing
Exposure to weather: all tagsaccept exposure to bright sunlight "outside" tags are for use in rain snow and car washes

.......more details

CPS-MEI

LiftMaster Electric Edge Card **to extent of inventory

The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
Same as Miller Edge SM-102

M8-705

Marantec Photoeyes 69190 / 97246

Works on all Marantec units
Includes brackets hardware and wiring
Same as item #86850 97246 used to be M4-705
Made in Germany

Installation instructions

27118-600V

Doorlec Electric Motor TEFC 2HP 600V 3PH DC224C

Frame size is 56C 1725 RPM for worm-gear reducer driven models

PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

Suitable for exterior applications NEMA 4
Multi-supply voltage 12-240VDC 24-240VAC
LED indication for power supply and target detected
Not recommended for carwash applications
Operating temperature -25 to +55 C
Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3

.......more details

Installation Manual

377LMC

LiftMaster Wireless Keyless Entry 315 MHz ***Replaced by 878MAX

Compatible with Liftmaster Sec+ garage door openers commercial door operators gate operators and radio control receivers
Mounts easily to the door jamb with two screws
Compatible with openers built 2005+
Replaces 376LMC and same as Chamberlain 956D same as 377LM
Includes 9V battery

Programming Instructions Instructions de programmation

37500

Doorlec DC-2000 Electronic Circuit Board Photocells not Required

Works in all Doorlec model openers except R-99
Input power to board is 120V
24V DC available on terminals 9 & 11
Accessory power on terminals 1 & 11
1 = Stop. 2 = Com. 3 = Open 4 = Close
Can be adjusted for constant pressure

.......more details

DC200 Logic Board Product Guide Electrical Diagram

041-0495-000

LiftMaster Keypad Battery Cover

Replacement battery cover only
Compatible with L979S L979M and L979U

461-0002-08

Richard-Wilcox #31 Square Track 8ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75 x14g but additional brackets are required for doors 400lbs-550lbs at a spacing of 1.5ft. Under 400lbs spacing is every 2ft

Specification Catalogue

P-831RE

Pulsar 1-Door O/C/S Receiver 318 MHZ P-110554

Allstar compatible
Economy housing receiver
OPEN-CLOSE-STOP
24V AC/DC
8 dipswitches 318 MHz

Wiring-diagram

CGH303L5-RH

LiftMaster Gearhead w/Carwash Mod. & Brake 3 HP 208/230/460V 3P L5 Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

RADIO-EM144

Manaras 144-Door Transmitter O/C/S 390 MHz

3-button O/C/S transmitter for144 Doors
LED Indicator Nema 1 Enclosure
Soft touch push buttons including a bright red stop button for easy identification
Compatible with Manaras Opera Rolling Code Series "100" Transmitters and receivers
Compatible with Manaras Operators equipped with Board 70 or external receiver Radio-RE901 and Radio-Kit004 & Radio-Kit005
Wall or Post mount

.......more details

Programming Instructions Specification Sheet Sell sheet

EBOX-HHD-7511-R

Complete Control Box for PRO-HHD-7511 with Mechanical Contactor and Timer to Close

104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

Compatible with Allstar and MVP receivers
4-digit access code
Backlit keys
Operate LED
Power: 9-volt battery
Codes: 19683

.......more details

Programming Instructions

2420L

Special ends 2026-08-30

LiftMaster Basic Series Chain Drive 3/4HP DC Motor Wi-Fi Battery Backup Integrated Camera

Chain Drive and DC motor with soft start/stop for quiet operation
HD Quality Camera with night vision
1 LED bulb (60 watt max)
Two-way communication to the myQ app
Premium battery backup included (485LM)
Comes with: 1 (L993M) 3-button remotes

.......more details

Product Guide 2420L Accessory Compatibility Chart 2025 Comparison Chart 2025

LDJ-CAP-48MFD

Doorlec Run Capacitor for LDJ RCR50-370

370VAC/B 50 uf 50/60 Hz
CSC run capacitor

IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
The IRB-4X2 will work with any control board that accepts dry contact on the input.
The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
*Not for use in applications requiring UL325 compliance
Thru beam design is not affected by shiny surfaces
Wide 24˚ transmission angle allows easier alignment and increases reliability

.......more details

Installation Manual Specification Sheet

TNR-HDXL-CUSTOM

TNR Doors Extra Large Rubber Door Price by Quote Only Made to Order

Suitable for applications up to 55 feet wide and 35 feet high
Self-supporting channel steel C10 & flatbar mounting assembly
Knock-away double angle steel bottom bar for 15lb/ft with rubber loop and reversing edge
Frame mounted thru-beam photoelectric sensor
High-Efficiency Heligear Head (HG) Operator with multi-function PLC panel
Door speed of up to 12 inches per second

.......more details

BCSI-PM31

Pivin Drapeau Disconnect Lever BCSI ** Price by Quote Only

For industrial slide gate operator

850LM

LiftMaster Universal Receiver Sec+ 2.0

Designed for both gated communities and commercial buildings.
Innovative and exclusive narrow band multi-frequency radio which virtually eliminates radio interference and eliminates customer call backs due to poor range performance.
Three channels provide expanded remote control capacity: Channel 1 - 50 remotes and 2 keypads Channel 2 - 20 remotes and 2 keypads Channel 3 - 20 remotes and 2 keypads
Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
Power: 12-24VDC or 12-24VAC
Compatible remotes; 811LM 813LM 891LM 893LM 890MAX 893MAX 892LT 894LT

.......more details

Programming Instructions Instructions de programmation Programming 993M to 850LM Sell Sheet

MH5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Jackshaft Operator

1/2 HP 120 volt 1 phase medium-duty hoist operator Logic board with integral 315 MHz radio receiver for Open/Close or Open/Stop/Close
CPSU commercial photoeyes included ( Nema 4 optional)
4L V-Belt #48 drive chain adjustable friction clutch
Emergency disconnect and chain hoist standard
Solenoid actuated disc brake
Door speed approximately 8" to 12" per second

.......more details

Installation Manual Manuel d'installation MH Sell Sheet MH Shop Drawing

412HMC

LiftMaster Single Channel Co-axial Radio Receiver 4 Wire 390MHz

390MHz universal coaxial receiver for Open/Close
Will accept 15 remotes on "High Security" or 31 remotes on "Normal security"
8" wire antenna included (part #41C3196)
Input voltage 12-24V AC/DC

Programming Instructions Instructions de programmation

7FT-BELT-SKYLNK

SkyLink 7 ft Rail Belt

50-19503

LiftMaster Push to Open Bracket

Allows the gate to swing away from the property
To be used with LA400 and LA412 gate operators

Installation manual

BLSI12

Pivin Drapeau Vertical Lift Barrier 1/3HP 120V 1PH 6.57A/5.65A

Specify length of arm required up to 12'
Arms made of 1" x 3" rectangular aluminum
Has a 150W heating element optional 300W is available
Operating temps: -40 degrees C to 50 degrees C
8 seconds opening/closing time
# of cycles: 750000

.......more details

E/BLOP/276

Automatic Systems Audible Alarm for BL229

BCSI-BM-31

Disconnect Lever Industrial Slide Gate Operator ** Please use BCSI-PM31

MET-14500C

Cable Tie Metal Tooth 14" 50 LB Black 100/Bag

41A3504-1

LiftMaster Antenna Kit with Adapter

Designed to work with the 433MHz receiver logic boards
Kit contains: Antenna Coaxial cable adapter and antenna bracket

41A6388

LiftMaster Split Coupling (41B6299 / 41D8615)

Same as # 41B6299 and 41D8615
Compatible with all Liftmaster 3800 3900 & 8500 Residential and Commercial Jackshaft Operators.
Door shaft collar RJO

K001A6837

LiftMaster Replacement Logic 4 Circuit Board L4****No longer available

iftMaster replacement logic board (L4) kit for Commercial operators L4 board is UL325 compliant & requires CSPU photoeyes for momentary contact operation
Works with LiftMaster operators of all voltages and HP
Maintenance Alert System (MAS)
Open Mid Stop feature
Timer-to-close mode
Car dealer mode

.......more details

CSW24UL

LiftMaster 24VDC High Traffic Commercial Swing Operator

24VDC swing gate operator with battery backup
Heater NOT included. Heater sold separately # HTR
Continuous-duty motor with soft start/stop
Receiver holds up to 50 remotes
Power: 115V or 220V Single Phase
Built-in surge protection

.......more details

Installation Manual Sell sheet Brochure Site plan

1010-PER-FOOT

Replacement Sweep for One-Piece Door Grey Vinyl

Fits into the bottom of one-piece 'Stanley' doors.
Sold per foot
2" wide

LMRRUL

LiftMaster Monitored Retro Reflective Photo Eye w/Heater 2018 UL325

Features integrated diagnostics with our 2018 UL® 325 Gate Operators.
Versatile Solution for entrapment protection.
Long-Range Sensing Distance of up to 50 ft. (LMRRUL)
Built-In Heater for dependable performance in most environments.
Increased Beam Angle for simple reliable alignment.
Versatile Gimble Bracket for fine alignment and adjustability.

.......more details

Installation manual Manuel d'installation Sell sheet

10MATRIX-D-110

BEA 110–120 VAC digital inductive loop detector dual-channel

designed for vehicle detection in industrial doors parking barriers and gates

ALUM-570

Aluminum 24" x 100' Spool Storm / Gris Orageux # 570

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 570
Reverse side is #431 Bright White

Colour chart

27035

Doorlec Elect Motor 1 HP 208V 1 Phase base mount TEFC

For V-belt and worm gear reducer driven models

SAG-M

Siren Activated Gate Sensor Formally SOS Sensor

New and Improved Siren Operated Sensor SOS.
Allows Entry of Emergency Vehicles through Gates
The Siren Activates Gate Opener while all other sounds are rejected
Comes with a 4 x 5 Inch Reflective Sign
12-24VAC/DC
Emergency responders use the YELP signal to activate the gate

.......more details

Installation Manual

MC824H/V1

Big Metro MoonClever Control Box 110VAC

36350

Doorlec Reversing Time Delay 1.5 sec. 24VAC

In closing cycle door will stop for 1.5 seconds and reverse to fully open

050ACTBMC

LiftMaster Receiver Logic Board AC WiFi

050ACTBMC is a replacement Bluetooth® Enabled Receiver Logic Board Kit
For use with various LiftMaster® and Chamberlain® Wi-Fi® AC Belt Drive and Chain Drive Garage Door Openers manufactured 2011 to 2022 only.
The unit will feature a yellow learn button
Also known as: 1D8088-1 050ACTWFMC 050ACTWF 1D8808-3 041D80881D8088-1 50ACTWF 050ACTBMC 50ACBL1 50ACBL2 50ACBL3 50ACBL4 50ACBL5 50ACCL1 50ACCL2 50ACCL3 50ACCL4 50ACCL5 50ACBR1 50ACBR2 50ACBR3 50ACBR4 50ACBR5 50ACCR1 50ACCR2 50ACCR3 50ACCR4 50ACCR5

SPRAY-525

Aluminum Touch Up Spray Paint 350g Black / Noir #525

350g

CH900

Contact Cleaner 340g

Powerfull multi purpose contact cleaner and degreaser
Able to penetrate difficult to reach areas.
Cleans carbon deposits.
Removes dirt grease and other contaminants.
Safe on most painted and plated surfaces.
Suitable for contacts drivesmotors controls breakers switches telephones etc.

.......more details

Safety data sheet Fiche de données de sécurité

SETMCIC9V

Erone 1-Channel Wireless Module 433 MHz

You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V) and black (0V) wire into power supply
Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
Works with any 433 MHz Erone receiver

Wireless System Chart

SW-200

Devanco Torsion Spring Winder 200 for 1-3/4" to 2-5/8" Torsion Springs

pring Winder 200 is a torsion spring tensioning tool designed for use with a cordless drill (Non-impact). Developed for professionals in the installation and maintenance of residential garage doors. The device prevents work-related accidents and significantly reduces physical strain of door installation work. The Spring Winder 200 is suitable for all residential garage door torsion springsranging from 1-3/4 inches to 2-5/8 inches. Technical Specifications:
Weight: 5 kg / 11 lbs
Length: 56 cm / 22 inches
Max. Torque: 147.51 lb/ft
RPM: 500-2000
Material: Aluminium steel plastic

.......more details

User Guide Sell Sheet Drawing Specification SW-200 Drawing Specifications Gear

OMJ-6112-M-N1-R/L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes RH/LH

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

827LM

LiftMaster MyQ Remote LED Light Sec+ 2.0 *** No Longer Available

Easily mounts on ceiling or wall within 6 feet of a 120V electrical outlet.
Can be programmed to turn on and off at certain times through the MyQ App.
LED bulbs require no maintenance.
1500 lumens – about 50% brighter than many standard LED lights ensures the garage is always bright.
Programmable to work with any MyQ – connected garage door opener Security+ 2.0® garage door remote control/control panel or smartphone.
Compatible with remote models: 374UT 375UT 892LT 894LT 891LM 893LM 890MAX and 893MAX

.......more details

MK-00646

Micanan 9" Coax Cable for On-Board Receiver

22-01184

Truck Door Three Whole Hinge Utility Style

Aluminum Extrusion
Cross Reference: Utility #3-4100-0022

841LM

LiftMaster Automatic Garage Door Lock Connector with 3 pins

Automatic operation performs in tandem with the opener so it always locks and unlocks.
Anywhere assurance smartphone monitoring with the MyQ® App means homeowners always know that the garage is secure
Absolute protection the automatic deadbolt lock makes the garage door virtually impenetrable
Comes included with 8500W
Works on models 8550WLB 8360W 8587W & WLED
same as Part # 001D8875

.......more details

CAPACITOR008R

Manaras Capacitor 440-648uf incl. Bleeder Resistor

Used for 3/4 HP 120/230VAC 1 ph motor255 374 & 258
Also for 1 HP 120/230V 1 ph motor350

AUXCARD

LiftMaster Auxiliary Relay Option Board

Provides additional contacts for and control of auxiliary devices such as external heaters security devices or warning devices
5V to 240VAC

Programming Instructions

041D7440

LiftMaster Electric Motor with travel module 1/2HP

For various LiftMaster® and Chamberlain® 1/2 HP AC Chain Drive Garage Door Openers; manufactured after 1997

344866

Exterior Curtain Lock for DS-75 Mini Roll-Up Door

50-CP4

LiftMaster Sensing Probe Free Exit 100ft Lead

Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
Can be installed above or below ground
Connects directly to any gate operator without an external output board.
Works with powered or solar gates.
SPECIFICATIONS: Cable Lead Length: 100 ft.
Power Requirements: 8-24 VAC oe 8-30 CSX

.......more details

Installation Manual

PMT20RI

Carlo Gavazzi Receiver Unit Only

PMT20RI has universal voltage input of 10-240 VDC and 24-240 VAC
Normally open and normally closed output (no timer).
Adjustable sensitivity
The housing dimensions are: 25x65x81 mm
IP67.

Installation Manual

60-2728

AB 42GRU-9001 Retro-Reflective Photocell Exterior

Voltage: 12VDC/24VAC/DC
Sensing Distance: 30 Feet
NEMA 3 4 4X 6P 12 & 13
Allen Bradley

S142ARNN924

Carlo Gavazzi Amplifier 24V

Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
11-pin circular plug for easy connection.
8A SPDT relay output NPN/ PNP transistor output or alarm output.
Diagnostics for sensor test during operation.
Alignment help via LED or alternation of alarm output.
Level indication for dirt accumulation.

.......more details

Installation Manual

SS-1

Super Sneaky Low Headroom Top Bracket Sold as a Pair

Designed for use with low headroom standard lift automatic garage door installations
Eliminates the need for low headroom double track
Effective and easily doubled up for heavy commercial door applications
Replaces top fixture and uses existing roller
Zinc plated heavy guage metal
Sold as a pair

.......more details

WG-305

Devanco White Lithium Grease

Provides long lasting lubrication and protection against rust and corrosion
Ideal for metal to metal applications
Sprays on thick providing a long-lasting protective coating that won't run off

Material Safety Data Sheet Fiche Signalétique

DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

Activates one Delta-3 receiver for remote stop or reverse safety edge
No cables or coiled wires
Mounting screws (4) supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

F539.90000

Bircher Infrared Programming Remote RC Duo 2 Red 351652

Conveniently program all parameters from ground level
Backlighting of specific buttons provide instant confirmation of programmed parameter & value
Configure any Hercules 2 Hercules 2s Reflex 2 or UniScan sensor with the same remote
Multiple address feature allows programming of a single sensor even in close proximity to other sensors
Large highly visible buttons
Automatic off feature conserves battery life

.......more details