Devanco Canada - Get The Right Garage Door Opener‎ and Parts

24-RWB-PAIR

Winding Bars Round 24" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

1104-12FT-SAND

Residential Side & Top PVC Weather-Strip with cap 12' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

PULL-CHAIN

Pull Chain Spring Only 12" Long

Spring Only for pull chain device
Used with a hand chain for full vertical doors.
Eliminates the need for leaf bumpers

91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

Zinc plated finish
Cross Reference: T #80015-1610 120250

91-00402

Truck Door Rib Neck Carriage Bolt 1/4"-20 x 1.25" (9/16" head)

Zinc plated finish
Use rib neck carriage bolts with lock and keeper assemblies and hinge installations
Rib neck carriage bolt allows tamper proof installation with a rivet lock and eliminates the nut being installed externally for security.

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-2 T #59129-2 W #4014 330000

27-20126

Truck Door Spring Spacer 33" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

26-94322

Truck Door Bottom Panel with Seal (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

25E10051

Truck Door Center Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #15 T #70159
Box quantity: 50

R5999

Shaft Collar 1" with 1 Set Screw

Set Screw: 5/16 x 18

H11G08

Hinge #8 x 11 gauge

11 gauge #8 hinge - 0.87 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

Z9003

Pusher Spring - 27" Sold as a Pair

Pusher spring 27" long with 15" travel. Sold as a pair

CB18B0500

Cable 1/8" 7x19 500' Galvanized

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs

Comparison charts

R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/8"
Riveted with Ball Bearing

903021ORBG

Operator Reinforced Bracket 21" Galvanized

Comes with clevis and clip pins. 24 per carton

D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
Works with most LiftMaster gate operators
Won't work with Elite Series Mega Arm Slide & Swing
Simply plug it into the harness already in the operator
Loop lead-in wires connect to operator terminal strip
Gold plated control contacts

.......more details

Installation Manual Sell Sheet

.250_3-3/4"-LH

Torsion Spring .250 x 3-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft

210272

Skylink Belt Gear for Atoms Operators

Plastic Gear
Fits Atoms / Atoms+ / Atoms Pro (AT & AN) Series

K74-33015

LiftMaster Electrical Box Replacement Kit L3 **to extent of inventory

For models T GT and GH L3

7FT-CHAIN-LINEAR

Linear 7ft Chain Rail for residential openers (HCT7C)

7ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 carriage house I-rail conversion kit

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

Up to 100 000 individual codes
Mounts to wall or gooseneck post
Incl. 6-volt alkaline battery
Illuminated stainless steel faceplate and keypad
Tamper-resistant case and "low battery" indicator
Requires 412HMC receiver

.......more details

Installation Manual Sell Sheet

MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: 70 milliseconds

.......more details

Installation Instructions MWT12B Spec Sheet MWT12B FAQ MWT12B

.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

SESMT03

Erone Wall Support for Transmitter

Wall support for one S2TR2641 transmitter
Color: Grey
Velcro and mounting hardware included

Wireless System Chart

PRO-GH-7583U-R

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

19-48047M

LiftMaster Roller Chain #48x47

#48 x 47 pitch with master link
Internal reduction chain
Length is 24"

5X10PO50

Devanco Loop 5' x 10' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

CPT-223-K5

Miller Edge Non-Monitored End Plug Kit *** No Longer Available

For use with the CPT-223-50 bulk extrusion
Kit includes: 5 wired 5 Non-Monitored end plugs and 5 1/8oz tube of vinyl adhesive
One kit is enough to make 5 non-monitored edges

RBH503L5-RH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

.250_3-3/4"-RH

Torsion Spring .250 x 3-3/4" x 12ft RH Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft

9006-08

Excalibur Threshold Kit 8'2" x 6" W Solid Aluminum ** Price by Quote Only

Stands 1/2" tall
Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
Two-way fastening/seal system won’t shift buckle or leak
Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
The 1/2" diameter wire access port makes it easy for sensor and security installations.
The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.

.......more details

SPP2905-TC

Telco SpacePak Diffused Proximity Photoelectric Sensor with 5m Cable

Multi-voltage diffuse proximity photoelectric sensor with a detection range of 5 meters without the need for a reflector.
Operation mode and max sensing range: Diffuse proximity: 0-5 m
Compact rectangular housing (50 x 50 mm x 17mm)
Power output and signal level indicators

User manual Manuel d'utilisateur Spec sheet

220315

Allstar Challenger Gear & Sprocket with Bushing

PMR10RIT

Carlo Gavazzi Retro-Reflective Sensor with Imperial Connector

PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
Immune to ambient light Selectable output function.
The plastic housing is IP 67 rated and allows cable or screw terminal connections.
Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
24-240 VAC or 12~240 VDC
Relay Output

.......more details

255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

Yellow T-astragal
Width: 4-3/8"

7001-WG-9-DO

Residential Wood Grain Side & Top W/S Dark Oak 9' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

CP-BRC-12

Lynx Resettable Circuit Breaker 12 AMP

Used on MCJH 3/4 hp 120V operators

NO_RAILS

LiftMaster Residential Operator Head Only $20.00 reduction

CG-2W-NM-BLK-LH

Miller Edge Clima-Guard 2-Wire Non-Mon Black Left Hand Outlet Sold by the Foot

Clima-Guard functions exactly like a pressure sensitive electric edge but with an added layer of protection.
The protective loop seal conforms to irregularities in the floor and helps prevent air infiltration and serves as a weather barrier.
ClimaGuard is made up of an ME112 sensing edge paired with a PVC loop seal that comes with a double slot mounting channel.
Electrical Configuration: Normally open
this edge comes with the channel

2513-NEO-BLK/BLK

Garex NEO Clear Thermal Window Black Frame Int/Ext

The NEO injected frame stands out with its flat design highlighted by a subtle central line that adds a touch of sophistication.
This modern look is perfect for those seeking a sleek minimalist aesthetic for their doors.

2513-GLASS-ONLY

Garex NEO Clear Thermal Glass Fits 25x13 Frame

Glass only to fit 25x13 frame
Glass measures smaller than frame

OGHW-6112-M-N1-LH

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB w/Carwash Mod Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
With Nema 4/12 modification
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection

.......more details

15886

Whiting Top Slide-Double Roller Use with 1264 ** Sold by Quote Only

Special Order item - sold by quote only

OGHW-6112-M-N1-RH

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB w/Carwash Mod Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
With Nema 4/12 modification
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection

.......more details

2705.139.140

Whiting Curbside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.139 wire size

1264

Whiting Top Closure Base Assbly Complete ** By Quote Only

Special Order item. Sold by quote only

1224-134-BLK/WHTE

Elton Comm Window for Flush Doors 1-3/4" thick 1224 Black Frame Ext/ White Int. Sealed Glass

Screw together window kit
Thermal window
Frame size: 25-1/8" x 13-1/8"
Cut-out size: 24-1/16" x 12"
Vision area: 21-11/16" x 9-5/8"
Different glass options and frame colours are available upon request

.......more details

2704.139.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.139 wire size

MK00157

Micanan Turck Dual Channel Intrinsic Safe Relay

an be field installed

K41-0390-000

LiftMaster EMI BOARD 480VAC T JH 700

For use with LiftMaster® JHDC JDC and TDC MAXUM 700 lbs - 1200lb. (480VAC)
Also known as: K41-0392-000

70568-X

Todco Side Seal Must Specify Length ** Special Order

Special Order - Price on Request

ACT-31D

Linear 1-Channel Block Coded MegaCode Key Ring Trans Prox Transmitter 318 MHz *** SOLD IN MULTIPLES OF 10

Compatible with all Linear access receivers and controllers
Built-in 26-bit Wiegand proximity tag
Eliminates need for separate proximity card or tags and transmitter
Supplied with quick-disconnect key ring
Same facility and ID codes for transmitter and proximity tag
Sold in lots of 10

.......more details

041A5807-4

LiftMaster Chain and Cable Kit 8' Door - New Style

This is one piece 8 ft. Chain and Cable Replacement Kit

MODKITMIC001A

Manaras Wi-fi Retro-Fit Kit for in-field "M" type operators

M type operators already equipped with monitored photoelctric cells
Includes Manaras Internet Control device MIC001 and ECB BOARD070M with integrated MIc Wi-Fi compatibility software
For operators before June 2022 that don’t have the program M7-04 or M8-04. The board in the operator needs to be changed to have the right program to use the MIC

041A5640

LiftMaster Limit Switch Kit

Limit Switch Replacement Kit. For use with LiftMaster® ATS Series and various AC Chain Drive Garage Door Openers; manufactured after 2001

SWG606

LiftMaster Hinge Set Of 2 - Steel

For uphill swing high usage or heavy gates
Can handle 2000 lbs. per pair.
Steel with bronze bearings.
1/2 in. thick weldable steel plates and 3/4 in. diameter steel hinge bolt.
Up to 15% lift.

15-50B56QGH

Sprocket 60 tooth 1.25" bore X 1/4" Keyway with SS

15-50B56LGH

Sprocket 56 tooth 1" bore X 1/4" Keyway with SS

PRO-J-5053-U

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Universal Mount

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

TDC22X1N4XMC

LiftMaster MAXUM with NEMA4 Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 100 Cycles/Hr 2200LB **Currently Unavailable

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

TDC12X4N4XMC

LiftMaster MAXUM with NEMA4 Trolley DC Comm. Op 3/4HP Equivalent 480V 1PH 60 Cycles/Hr 1200LB **Currently Unavailable

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately DC7AH).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

TDC12X1N4XMC

LiftMaster MAXUM with NEMA4 Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 100 Cycles/Hr 1200LB **Currently Unavailable

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately DC7AH).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

TDC7S4N4X

LiftMaster MAXUM with NEMA4X Trolley DC Comm. Op (#48) 1/2HP Equivalent 480V 1PH Std Cycles 700LB **Currently Unavailable

Good for Carwash and Barns
Corrosion resistant
Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - Provides seamless operation by supplying standby power when the power is down (battery backup sold separately)
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.

.......more details

JHDC7S4N4X

LiftMaster MAXUM with NEMA4X Jackshaft 1/2HP 480V 1PH DC Operator 30 Cycles/Hour 700LB long output shaft **Currently Unavailable

Good for Carwash and Barns
Corrosion resistant
DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

JHDC7S1N4X

LiftMaster MAXUM with NEMA4X Jackshaft 1/2HP 120/240V 1PH DC Operator 30 Cycles/Hour 700LB long output shaft **Currently Unavailable

Good for Carwash and Barns
Corrosion resistant
DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

RJDC7S4N4XL

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 480V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Left-Hand; 3" Output Shaft ** Currently unavailable

Good for Carwash and Barns
Corrosion resistant
High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Optional Battery backup sold separately (DC7AH)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

TG-R-PKIT

Miller Edge TrueGuard Monitored Reflective Photo Eye

Monitored Reflective Photo eye
30 ft. range
10K pulsed normally closed and normally open outputs
Polarized beam and corner cube reflector reject false reflection and increase sunlight immunity
Emitter/receiver can be mounted vertically or horizontally
Durable mounting bracket/hood and reflector hood provide added protection against debris and serve as weather and sun shields

.......more details

MP00038

Micanan Fire Release Modification

For Pro-HHD
Can be field installed

A1103B-BLK

DoorBird IP Video Indoor Station Black Edition

For door communication in residential commercial and public buildings
WiFi / LAN connection (PoE capable)
7“ True IPS Touch Display
2-way HD Audio up to 102 dB
Room to room communication
SIP support

.......more details

COVER056

Manaras Control Box Cover GH-MGH

Cover only

10FALCON-ARTEK

BEA Falcon Artek Motion Detector Mount 6.5 to 23'

Motion sensor with microwave activationsolution for industrial indoor and outdoor use.
Ideal for automatic industrial doors vehicle gates and detection and loading docks.
Sensor also has the ability to differentiate between pedstrians and vehicles
Can be set vertically from 0 to 180 degrees
Mounting height between 6.5' and 23'
12/24V AC/DC

.......more details

3-17-2

End Plate 2-5/8" flanged with bearing 12GA Sold as a Pair (L & R) (EBF 258)

Sold as a pair
Box quantity: 75

F1-F2

F1 to F2 Terminal Adapter

A6U49

Erone UHF Receiver and Antenna (20ft) (902-928 MHz)

U4GO A6U49 is a mid-range UHF (902-928 MHz) integrated solution perfect for vehicle and people identification at a distance of up to 20 feet (6 meters).
The readers which operate with AES128 encryption offer secure access in settings like parking facilities gated communities campuses hospitals and more.
The A6U49 offers a stand-alone mode and a Wiegand mode standalone: 7560 tags Wiegand: dependent on access control
2 relays
Min operating temp -4°F / -20°C
Max operating temp 131°F / 55°C

.......more details

SEL2681R868-Z4

Erone 4-Relay Stand Alone Mini Receiver 868MHz

The SEL2681R868-Z4 is a 868 MHz receiver with 4 relays output 24 VA.
Self-learning memorization. Pulse or step mode for 1 relay.
Encoding: Keeloq® hopping code

041B4569

LiftMaster Idler Pulley 2 Sprocket

F2-F1

F2 to F1 Terminal Adapter

D1101V-F-SSV2A

DoorBird Flush-mount IP Video Intercom Stainless steel V2A brushed

K74-30762

LiftMaster BATTERY PACK 12V 7AH QTY. 2

For use with various LiftMaster® Slide Gate and Swing Gate Operators
Complete kit includes: (2) 12V Batteries and (2) Battery Wire Harnesses.

ALUM-572

Aluminum 24" x 100' Spool Acadia XL # 572

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 572
Reverse side is #431 Bright White

WA7101

MBAR Security Key for Lid (1 Key) *** Price by Quote Only

RS389BWL

Roller 3" Steel 8" High Strength Steel Stem 6203-WL

Solid Steel Head with 6203 sealed precision bearing
High strength steel stem measures 7.69" to bulge 9" overall length 7/16" dia
Zinc plated head and stem
Rating: 100000 cycles of a 12' door
Load: 200LB

PULLEY012

Manaras Motor Pulley .625 Steel MA154L

K15-5032

Sprocket 50B32T 1-1/2"X1/2"

15-5032 G155032 155032
Compatible with LiftMaster® Model BG790 Barrier Gate Operators.

BATT54

Battery 12V

Replacement lead-acid battery 12V

SL-1301-SAQ/R

Red built in siren 100dB LED strobe lights with 10 LED Strips 10-24/VDC

54 LEDs total
Utilizes high-intensity LEDs
Simple 2-wire installation
Weather resistant
High-impact resistant case
High-impact and heat-resistant lens

.......more details

RJDC7S1N4XL

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 120/240V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Left-Hand; 3" Output Shaft ** Currently unavailable

Good for Carwash and Barns
Corrosion resistant
High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Optional Battery backup sold separately (DC7AH)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

GALV-TEST-CUT-TO-LENGTH

Cut-to-Length Torsion Spring .225 x 2-5/8" RHW Galvanized Orange/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-TEST-TRUCK

Truck Door W-Style Spring Assembly Curbside RHW 35" Long

Wire thickness: .187
Assembled Spring length: 35 inches long
Inside diameter: 2 3/16"
Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.

GALV-TEST-144

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

RJDC7S4N4XR

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 480V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Right-Hand; 3" Output Shaft ** Currently unavailable

Good for Carwash and Barns
Corrosion resistant
High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Optional Battery backup sold separately (DC7AH)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

RJDC7S1N4XR

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 120/240V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Right-Hand; 3" Output Shaft ** Currently unavailable

Good for Carwash and Barns
Corrosion resistant
High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Optional Battery backup sold separately (DC7AH)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

JHDC12X4N4XMC

LiftMaster MAXUM with NEMA4X Jackshaft 3/4HP 480V 1PH DC Operator 100 Cycles/Hour 1200LB ** Currently unavailable

Good for Carwash and Barns
Corrosion resistant
DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

JHDC12X1N4XMC

LiftMaster MAXUM with NEMA4X Jackshaft 3/4HP 120/240V 1PH DC Operator 100 Cycles/Hour 1200LB ** Currently unavailable

Good for Carwash and Barns
Corrosion resistant
DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

JHDC22X1N4XMC

LiftMaster MAXUM with NEMA4X Jackshaft 1.5 HP Heavy Duty 120/240V 1PH 100 Cycles/Hour 2200LB ** Currently unavailable

Good for Carwash and Barns
Corrosion resistant
DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details