Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Open
41A5021-1G

LiftMaster Receiver Logic Board (41A5021-1I) **to extent of inventory

  • This circuit board works with Security+ Openers with no light socket.
  • Same as 41A5021-1I 41a5021-3E 41A2021-1 41A5021-1B 41A5021-1C 41A5021-1D 41A5021-1E 41A5021-1F 041A5021-1G 41A5021-1H
2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 1" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

  • Jack Shaft Mounting plastic guide 4.5:1 reduction
  • Gear drive
  • Fits 3-3/8" minimum offset
  • Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
  • 1 chain keeper
  • 2 shaft collars
    • .......more details
Sell sheet
5X15SC50

Devanco Loop 5' x 15' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
YSG12-24LED

Devanco Stop and Go Light Yellow Housing 12-24V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

  • 1/2 HP 120 volt 1 phase medium-duty logic trolley operator
  • Medium-duty logic board with integral 315 MHz radio receiver
  • CPSU commercial photoeyes included
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
  • 2 year warranty
    • .......more details
Installation manualManuel d'installationProduct guideGuide de produit
T-833-C-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025-311 MHz****NLA

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
655202

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

MV00077

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when the door is locked
485LMC

LiftMaster Battery for Integrated BBU Units

  • For use in Liftmaster 8550 8500W 3850 and 8360 models
  • 12V 4.5 AMP
  • Same as Part # 41A6357-1 41A5948
  • Battery back-up good for 20 cycles
Installation ManualManuel d'Installation
7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

  • Price reflects cost if purchased with an opener
881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

  • Push button for garage door operation
  • Motion-detector automatically turns on the light when movement is detected
  • 150 degree sensing angle for motion sensor
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
  • Light run-time is 4 1/2 minutes with adjustable light timer option
    • .......more details
K79-15016-1

LiftMaster RPM Sensor Assembly L2 L3 L4 L5

  • RPM sensor for Liftmaster Logic Control L2 L3 L4 & L5 Commercial operators
41AC075-2S

LiftMaster Circuit Board Assembly for Single and Double Capacitor Models 315Mhz

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
19-48ML

Master Link #48

  • For #48 chain (#410)
  • Same as #65 chain
MH5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Jackshaft Operator

  • 1/2 HP 115 volt 1 phase medium-duty hoist operator
  • Logic board with integral 315 MHz radio receiver for Open/Close or Open/Stop/Close
  • CPSU commercial photoeyes included ( Nema 4 optional)
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Emergency disconnect and chain hoist standard
  • Solenoid actuated disc brake
    • .......more details
Installation ManualManuel d'installationMH Sell SheetMH Shop Drawing
111645

Allstar MVP 1-Channel 4-Wire Gate Receiver 318 MHz ***Replaced by P-9931R-4F

  • One channel
  • 4-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
HSC-600-B

Bench Swager 1/16" - 3/16"

  • Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
  • Wire rope cutting capacity 3/16”
  • Made in Japan
MP-00001

Micanan Timer to Close 24V Modification

  • 3-button o/c/s function timer will start counting from fully open reverse and reset from any device
  • 24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)
LA500DCS

LiftMaster Secondary 24VDC Actuator Arm for Dual Swing Gate Applications New Model

  • Includes 40ft cable and junction box
Installation ManualManuel d'installationSell Sheet
MGH-6433-M-N1-RH

Manaras 3/4 HP 480V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6233-M-N1-LH

Manaras 3/4 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
OGH-6113-M-N1-LH

Manaras 3/4 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
SPR40B48X1

Sprocket 40B48 1" Bore 1/4" KW 2SS

  • 48 tooth sprocket for #40 chain
31373-114

Doorlec Sprocket 60B36 1-1/4" Bore

EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

  • Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners
RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
SA1929/A19

Automatic Systems Retrofit Logic Board with Drive for BL229 Board and Double Channel Loop Detector

  • Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
  • Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)
Q032

LiftMaster Limit Nut (K75-50101)

  • For models: SL3000 SL3000ULE ROBO SLIDE
EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

  • The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
  • The cable connects to the antenna base on one end and the receivers F connector on the other.
  • If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
  • Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
    • .......more details
Installation manual
AHB-716

Adjustable Hinge Bracket for 7/16" Roller Shaft

  • Mounts on the #1 hinge to make the hinge adjustable from #2 through #13
  • Eliminates the need to stock odd size hinges
  • Works for 7/16" shaft diameter rollers
MA020T

LiftMaster Mega Arm Tower Replacement Cover

  • Mega Arm Tower Cover.
  • Compatible with LiftMaster® Barrier Gate Perimeter Access Systems Operators.
WA11

NICE Adjustable Stand for L & M BAR Gate Op

  • Adjustable stand for the barrier arms of the M-Bar & L-Bar barrier gate operators
  • Attaches to ground and provides support when arm is down
LMUNTG

LiftMaster Glass Mount Parking Pass Tag Sold Per Card

  • A security-enhanced RFID passive transmitter for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader.
  • Glass-mount means it can be affixed to either the windshield of a car or to the headlight housing of the vehicle
  • Aligns with the cone-shaped detection zone from LiftMaster RFID Reader and activates it to open gate barrier
  • Added security of single mount use: shuts off if removed after adhering to a surface
  • Use on trucks or other high-clearance larger vehicles; 20-25 ft detection range from reader
  • Tags are sold in batches of 50. Your location may have a facility code. Check with your maintenance department or administrator if needed
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
02-103LGO-1

Push Button Station 3-btn Surface Mount O/C/S Nema 1 For LGO Ops only

  • PBS-3R
  • Open-Close-Stop
  • Works with Liftmaster LGO commercial operator
  • Also known as: 02-103LGO1 02103LGO1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
  • Normally Open contact on Stop therefore it won’t work on any other LiftMaster operator besides the LGO. The 02-103 will work on all operators.
    • .......more details
TRANSF112

Manaras Transformer 575V-24V-50VA

ATSW

LiftMaster Light-Duty Dual-Rated Trolley Operator

  • Wi-Fi enabled – completes the LiftMaster Light-Duty product family with Wi-Fi on board
  • Built-in Wi-Fi enables access to myQ® or myQ Business™
  • Security+ 2.0®
  • Dual-sided lighting with light lenses provides superior illumination
  • Electronic limit setting for easy installation/setup
  • Compatible with myQ Accessories (827LM Remote LED Light 825LM Remote Light Control 823LM Remote Light Switch 829LM Door Monitor
    • .......more details
SELECTOR-BTN-8L5

Devanco replacement rotating black button for 8L5-OCS

  • replacement black button but for rotating 8 position selector for 8L5-OCS
CH503L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
SOFT_EDGE-PROFILE

Devanco Canada Soft Edge Profile Sold per Foot

  • Yellow air-wave edge
  • Fits most 1-3/8" to 2" bottom retainers
  • 300 feet in a roll
81600

LiftMaster 81600MC DC Chain Drive Wi-Fi Bluetooth ***Discontinued***

  • Safeguards garage access by sending a new code with every click.
  • PosiLock® electronically protects against forced openings.
  • Alert-2-Close signals when a door is being closed by MyQ®.
  • The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
  • Customized DC Motor is purposefully designed and built to last.
  • Chain Drive system for steady performance and industrial strength.
    • .......more details
Product guideGuide de produit81600 Installation Manual81600 Manuel Installation
DW-RS-200

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit NOC/NCC

  • The small radio transmitter unit and the pneumatic switch are packaged within the DW3S-200 case while the receiver is built into a Nema 4 case
  • It is equipped with a NC or a NO relay
  • Kit includes radio transmitter DWTR-200 433 Mhz and receiver RSW-R 433 Mhz
  • Battery is included # CR2032
Operating Instructions
MK-00015

Micanan Fuse 2 Amp 250V Glass Sold per Fuse

MW-00057

Micanan Splash Proof Cover Light Duty Fully Assembled

  • Splash proof cover for models: PRO-LJ J LH LHA and GJ
  • Same as MP-00253
MK-00059

Micanan Timer 7 Day/24hr Economical

MM00021

Micanan Disconnect Lever MSI0012

Z9001-ACCPS

Pusher Spring HD for Commercial/Industrial Applications Sold as a Pair

  • Universal mounting can be configured to accommodate for limited room at the end of the horizontal tracks
  • Sold as pairs
2950-0003

3/64" Sleeve ONLY 100/pkg

  • Aluminum sleeves only 100 per pack
  • Stops are not available in this size
K1D8388-1CC

LiftMaster Main Control Board Linear Actuators for UL325

  • This replacement board is compatible with the following models: LA500U LA400U LA412U
  • Same as 001D8388-1CC
  • Sticker on board references 001D9040-1CC
MD-00280

Sprocket 41B32 x 1" 1/4" Keyway 2SS 5/16 Small Hub

  • 2 set screw 5/16
LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
CHW401-T/FORCE

Chain Hoist Wall Mount 4:1 2000R Torque Force (126654)

  • 4:1 Reduced drive
  • Sprocket: 41B36 Bore: 1"
  • Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
  • Cross Reference: 2000R OMI 4006
DrawingSell sheet
GAREX-TRACK

Garex Steel 26 ga Special Order

  • Special order to suit customer's needs
MJ5011U

LiftMaster Medium-Duty Jackshaft Op 1/2HP 115V

  • The MJ door operator is designed for use on vertical lift sectional doors or small rolling doors and grilles.
  • Maximum recommended duty cycle: 12 cycles per hour
  • Floor level disconnect
  • Adjustable friction clutch
  • Heavy-duty solenoid actuated brake
  • Easily field converted for right or left mounting
    • .......more details
Installation manualSell sheet
K72-13057

LiftMaster Clutch Shaft Kit APT

  • Kit contains: Clutch Plate Clutch Shaft Bearing 3/4" I.D Sprocket 41B10x3/4" 5L Belt Motor Pulley Spring Clutch Disc Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener.
DL-4000-8

Dock Leveler Retainer Galv. Steel Weldable 8' Long *** To Extent of Inventory

  • Weldable to sides of dock leveler
  • Use with 4007 aluminum retainer & light brush (not included).
  • Vinyl insert slides into this outer retainer.
T-931-H

FL-Heddolf 1-btn Transmitter P220-1K-311 MHz **this model is discontinued

  • Open/Close remote for 1 door
  • Dip switch led 9V battery and metal clip
  • Compatible with Allstar 1 button T-931 and T-931-M
  • New style transmitter case
PS241F

Adjustable Regulated Power Supply with Optional BBU 6-24VDC 1AMP

  • 3 preset voltages: 6 12 and 24 VDC
  • Full adjustment from 2 to 24 VDC if required
  • Requires AC transformer for input power (minimum 14 VAC for 12 VDC output 26 VAC for 24 VDC output cannot be connected directly to 120 VAC)
  • Maximum 1 amp. Output at 70 deg. F and free air
  • Ripple: Minimum load: 0.007vrms Half load: 0.028vrms Maximum load: 0.057vrms
  • Regulation: 97.5%
    • .......more details
Wiring DiagramDiagramme de raccordementSpec SheetSpécifications
MALED17

LiftMaster LED Barrier Arm 17 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
  • Counterweight required part # MALEDCW
41D7675

LiftMaster Receiver Logic Board 2.0

  • Also known as: 45ACT
1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
CABLE-NR-18-SS

Cable No Roll 1/8" 19x7 Stainless Steel T302-04 500ft

  • 19X7 SS T302 1/8” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
  • A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
  • Minimum break strength of 1700lbs
K77-36541

LiftMaster Antenna

  • For various gate operators
USVD-4X

EMX Ultra Sonic Vehicle Detector 2700-1

  • The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
  • The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
  • The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
  • Aux. relay settings for pulse on ENTRY EXIT or BOTH
  • Output delay option for 1 2 and 4 seconds
  • Operating range: 1ft. – 5ft.
    • .......more details
Installation ManualSell Sheet
71-10345

LiftMaster RPM Sensor Board (MT only)

PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board 372 MHz receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
GH101-L5

LiftMaster Gearhead with Brake 1 HP 115/230V 1P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
BOARD066R

Manaras Replacement Power Board ***No Longer Available

  • Used on all Manaras circuit board type operators
Installation ManualManuel d'installationReplacement ChartGuide de remplacement
MOD081

Manaras Damp Environment Oil and Dust Tight Modification replaces N1 with Monitored N4 Eyes

  • For applications where dust water spray oil leaks or any other type of condensation is present.
  • Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
  • If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well
M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

  • Same as part # 65892 97243 122436
  • Includes battery CR2032
  • Made in Germany
Instructions
PEDALU42

Aluminum Pedestal Post 42"

  • Pedestal post with hood
  • High quality aluminum
  • 42 inches
  • Dual face-plate allows for easy wire connections
Spec SheetShop drawing
59LMC

LiftMaster Outside Keyswitch ** To Extent of Inventory

  • 12 tumblers provide double locking action
  • Self cleaning barrel weather-resistant aluminum plate
  • Cannot be shorted out from exterior with key
  • One "NO" contact used to activate the door operator
  • Includes two keys
Installation Manual
195LM

LiftMaster Ceiling Mount ***Discontinued***

  • Designed to fit most standard garages
  • Black powder-coated finish hides wires and cords for a cleaner look
  • Mounts parallel or perpendicular to rail
  • Adjustable height to fit most ceilings
  • Hangs 6.5 to 24 inches down from ceiling
Installation ManualManuel d'InstallationSell SheetBrochure
.250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
109020

Linear 1-Channel Multi-Code Receiver 300 MHz

  • Three tabs for universal mounting
  • One "NO" relay
  • Compatible with 10 dip- swith 300 MHz Multi-code transmitters
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
41A5021-1ATS

LiftMaster Circuit Board Assembly (41A5021-1HATS)

  • Board: Security+ 390 MHz
  • Assembly includes: circuit board and end panel
  • Also includes: 1 Multi-Function wall ctrl panel - 2 wire
  • For: ATS211 & ATS211R
  • For newer model ATS use replacement board 41A5021-9G-315
  • Same as 041A5021-1HATS
    • .......more details
1702LMC

LiftMaster Quick Release Lock

  • For all vault-type garages
  • For exterior manual operation
  • 6ft industrial-strength connecting cable
  • Non-corrosive stainless steel faceplate and spur washer
  • Extension sleeve for doors up to 2" thick
  • Positive connection between cable and trolley release
    • .......more details
1702LMC Manual
41K4629

LiftMaster CPS Interface Black Box (CPICARD)

  • Allows CPS-U photoeyes to provide a 'NO' contact
  • Interface is included with CPS & CPS-N4
  • Also known as 041K4629 1C4489 41K4629 41C4489 CPI
41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

  • For LiftMaster Chamberlain & Sears openers built from 1993-1998
  • Kit includes: Saftey sensors 24" wire and gel connectors
  • Replacement: 041-0136 with the 041-0155-000 brackets
877LM

LiftMaster Sec+ 2.0 Keyless Entry

  • Features Security+2.0™ rolling code technology
  • One-button-to-close feature
  • Temporary password option
  • Program code directly from keypad
  • Backlit keypad
  • Includes 9V battery
    • .......more details
877LM Manual
RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

  • Open/Close remote for 2 doors
  • Comes with LED battery life indicator
  • 9V battery included
  • Sunvisor clip included
Programming Instructions
DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

  • Activates two Delta-3 receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
RV-300

3" Vinyl Insert for Brush Retainer per foot

  • Color: Black
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
HSC-600

Hand Swager 1/16" - 3/16"

  • Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
  • Tool length is 25-1/2"
  • Wire rope cutting capacity 3/16”
  • Made in Japan
25-10300

Truck Door Cable Anchor Bracket Zinc

  • Steel construction Zinc plated finish
  • Allows proper rotation of cable head
  • Cross Reference: T #61204 W #4004 240000
D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

  • Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
  • Works with most LiftMaster gate operators
  • Won't work with Elite Series Mega Arm Slide & Swing
  • Simply plug it into the harness already in the operator
  • Loop lead-in wires connect to operator terminal strip
  • Gold plated control contacts
    • .......more details
Installation ManualSell Sheet
T1B-DS

Lynx 1-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Use with receiver (RA-LYNX-RCVR) for open/close on commercial operators
  • Same as model 2211-L (TX)
    • .......more details
Compatibility chart
25-10001

Truck Door End Hinge for Todco Roll-Up Doors

  • Zinc plated steel construction
  • Four-knuckled to ensure smooth door operation
  • Cross Reference: T #69035 W #4007 220000
302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

  • The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
  • The 300 MHz frequency is compatible with standard Multi-Code transmitters
  • The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
  • Operates on 12-24 volts AC or DC power
  • Two channels
  • Whip antenna
    • .......more details
Programming Instructions
MK-00646

Micanan 9" Coax Cable for On-Board Receiver

7-6028

RW Bottom Cane Bolt 524 x 3

  • ormed steel bar. Formed heavy steel. Black enamel 1" Dia. x 25" Lg.
262670

Bircher ProLoop 2 Dual channel loop detector 24 AC/DC Din-Rail

  • 2 Independent Loop Inputs for dual-lane detection or differentiated entry/exit monitoring
  • Two Configurable Relay Outputs: Allows integration with control systems for gate/door activation alarms or signal switching
  • Alarm Output: Enhances safety by dedicating fault outputs or loop error detection
  • Intuitive interface allows for a simple and fast setup Ideal for vehicle access control for gates barriers and parking systems
  • 24V AC/DC input voltage
  • Din-Rail mount
    • .......more details
L956W

LiftMaster Wireless Multi-Function Control Panel Security+ 3.0

  • Wireless control panel can be installed almost anywhere in the garage.
  • Includes a large push bar for garage door opener operation and a light control button.
  • Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
  • Compatible only with LiftMaster Security+ 3.0™ garage door openers.
  • No wiring required. Powered by CR2032 battery (included).
  • Warranty: 1 Year
    • .......more details
Installation ManualManuel d'Installation Compatibility Chart 2025 Comparison Chart 2025
PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
  • 3-button keychain remote with proximity sensor
  • 2x the range of standard remote controls
  • Narrow-band transmission
MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: 70 milliseconds
    • .......more details
Installation Instructions MWT12BSpec Sheet MWT12BFAQ MWT12B
DCWALLCTL

LiftMaster Floor Level Wall Controller with LCD Display

  • Compatible with LiftMaster MAXUM Commercial Door Operators.
  • 4-line LCD display gives you access to more information at all times
  • Bringing programming troubleshooting and Diagnostics down to the floor level will save you time and money
  • Menu based user interface allows you to scroll through edit and save options and settings easily.
  • Dimensions: 3.586” W x 8.166” H x 1.732” D
BPFL205

Bearing Flangette Retainer Only PFL-205 2 pieces 2-Hole

  • Does not include bearing
  • Steel Zinc plated finish