Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Side & Top
MW-00232

Micanan In-Line Torque Clutch Assembly Modification

  • Clutch is mounted in between motor and reducer flange
  • Overall length of operator increases by 3.85"
  • For models PRO-GH / GHC 1/2hp 3/4hp 1 hp 1.5hp & 2 hp
LMHS2475WPADA

LiftMaster Horn / Strobe 12/24VDC White W/NO

229557

Torque Force EZ Low Headroom Conversion Kit

  • Reduced headroom as low as 8"
  • Convert a standard lift door to a low headroom door without using an outside hookup configuration.
  • Easy to install 3 piece kit
  • Fits on 15" radius and 12" tracks
.421-514-L

Cut-to-Length Torsion Spring .421 x 5-1/4" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
MM00015

Micanan Solenoid Lever Gearhead (MSI0031)

ME00010

Micanan Input Shaft PRO-J 3/4" x 11-3/4"

  • Micanan has permanently changed the length to 11-3/4" from 11-9/16" (2025)
HINGE-211-PCG

Powdercoated Hinge #2 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #2 - 0.71 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
2950-0003

3/64" Sleeve ONLY 100/pkg

  • Aluminum sleeves only 100 per pack
  • Stops are not available in this size
CABLE_364SS-250

Cable 3/64" 7x7 250' Stainless Steel

  • Not for use in aircraft applications
  • Type: T304
LIMIT023

Manaras Single Limit Switch with 46 degree Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
RS1311

Roller 3" Steel 11" stem Precision Bearing

  • Steel Roller Wheel diameter: 3" 11" stem length 7/16" stem dia
BD3240

Piezo Warning Buzzer Alarm with Volume Control 24VAC/DC

  • 2-1/2" long 90 DBA
CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

  • Same as Garaga CF101
CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

  • Same as Garaga CF101
CRBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
89463

Marantec Deluxe Wall Control Panel w/ Light & Vacation Lock

  • This unit will work on any model Marantec garage door opener
  • Replaces part # 47307 65456 M3-543
  • Made in Germany
MD00420

Micanan Flex Coupling Lovejoy 3J x 3/8"

41C4842

LiftMaster Universal Replacement Motor and Bracket Assembly

  • Same as 41A4842
  • Replacement for 3280 1/2 hp motor
ER294-K

Heddolf Long Range Receiver 433 MHz

  • Up to 1500ft range
  • Compatible with EX220-1K
T-832-H

FL-Heddolf 2-btn Transmitter 311 MHz (T-832-S) ***Discontinued

  • Open/Close remote for 2 doors
  • Battery 12V included
  • Compatible with Keystone T-832-H and old Allstar T-832
  • 8 dip switch
  • Same as P220-2K
Programming instructions
RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation manualManuel d'installationSell sheet
220315

Allstar Challenger Gear & Sprocket with Bushing

L-4-18-0-M

Cable Tie Standard 18 LB Black 4" Nylon 1000/pkg

  • Length: 4.12" / Width: .095" / Thickness: .042" / Diameter: .875"
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
KPX-100

EMX Access Control Keypad

  • Stainless steel face with metal backlit keys
  • Anodized and powder coated steel outer housing that is vandal and weather resistant to IP66 (all weather)
  • Dual relay outputs
  • Over 100 Million 4-8 digit codes
  • 12-24V AC/DC operation
  • 100 user codes on Relay 1; 10 users relay 2
    • .......more details
XT2564-CUT

Xcluder Rodent Block 4" Black Sold per Foot

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
39142R

Genie Aladdin Connect

  • Aladdin Connect™ controls and monitors your garage door opener with your smartphone
  • Compatible with smartphone iPad(R) & tablet devices
  • Easy installation & setup
  • Operates up to 3 doors with 1 system
  • Able to program timed closed functions
  • Wi-Fi communication Retro-fit capable Works with all brands
    • .......more details
Quick set-up guideGuide d'installation rapide
PPLX

LiftMaster Stand Alone Proximity Reader ** NLA

  • 6" read range
  • 50000 user capacity
  • Multiple Wiegand protocol (Sentex® 26-bit industry standard PassportTM)
  • Programmable as stand-alone or Wiegand pass-through
  • Simple-to-use handheld radio programmer (model PPRP; sold separately)
  • Programmable output relay (NO/NC)
    • .......more details
Programming instructionsSell sheet
PRO-APTB-5011-R

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake Contactor

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
Installation manualSpecification sheet
MX00140-NEW

Micanan Brake Assembly for PRO-TB/APTB NO Solenoid - New Model (SBR-N1-00-TTBPAPT)

MALED12

LiftMaster LED Barrier Arm 12 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
OSH-6114-CONT-R

Manaras Opera-SH 1HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

  • Galvanized cable 3/16" 7x19 500ft spool.
  • Cable break strength: 4200 lbs
  • A higher quality cable compared to the Chinese cable
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4

  • Standard 1/2 hp motor
DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
    • .......more details
Programming InstructionsInstructions de programmationSell SheetWireless System Chart
MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

  • The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.
    • .......more details
Installation ManualSell Sheet
BK313

Jamb bracket J-13 #13 12 gauge

  • Sold by the piece
  • Height 5.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK307

Jamb bracket J-07 #7 12 gauge

  • Sold by the piece
  • Height 3.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
MOD050

Manaras Friction Clutch Mod. #50 Chain Gear Head Operators

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to OGH and MGH operators
    • .......more details
20418R

Genie Limit Switch Lead Wire Brown

  • Brown - Used to connect down limit to sequensor
  • For Screw drive models
AK-21

Linear Interior Digital Keypad***to extent of inventory

  • The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
  • It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
  • The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.
Installation Manual
CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

  • The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.
Programming Instructions
02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

  • Outdoor Surface Mount Nema 4/12 station
  • Standard key cylinder is replaced with BEST cylinder
  • Open/Close spring return to center (off)
  • Key removable in center position only
  • With Stop button
41A6104

LiftMaster Cable Tension Monitor

  • Used on jackshaft model residential garage door openers
UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
PED4272

Pedestal Post 42" & 72" Dual Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with 6 in. center radius giving a tight professional look
PRO-HHD-5011R-R

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Right Hand (PRO HHDR)

  • 1/2 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation manualSpecification sheet
WG-305

Devanco White Lithium Grease

  • Provides long lasting lubrication and protection against rust and corrosion
  • Ideal for metal to metal applications
  • Sprays on thick providing a long-lasting protective coating that won't run off
Material Safety Data SheetFiche Signalétique
M18

LiftMaster Remote Control Tester ** NLA

Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

  • Pusher spring 27" long with a large 3" tip. Sold as a pair
  • 11lbs of initial pushing strength per spring+ 3lbs per inch per spring
302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

  • The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
  • The 300 MHz frequency is compatible with standard Multi-Code transmitters
  • The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
  • Operates on 12-24 volts AC or DC power
  • Two channels
  • Whip antenna
    • .......more details
Programming Instructions
50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

  • Nema 4
  • 3-wire air switch; 1-NO and 1-NC contact
  • Mosley
  • NO contact on Yellow and Green
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
41AC075-2S

LiftMaster Circuit Board Assembly for Single and Double Capacitor Models 315Mhz

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
41A6102

LiftMaster Power Door Lock Connector with 2 pins

  • For Jackshaft models
13-10024

LiftMaster Limit Nut

  • Limit nut / cam for commercial door and gate operators
LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT003
  • 2x SPDT - Unimax
  • Same as Doorlec # 21702
Limit Switch Chart
BRAKE011

Manaras Band Brake Assembly Kit

  • Does not include solenoid
  • Replacement brake kit for operators that are belt driven and have a brake. Works with OSH OTBH
  • Will not work with Gear-Head operators
Installation Manual
RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
  • Maximum 50 transmitters per receiver.
  • Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD
6589

WhitingBrush Side Seal assembly for insulated doors

  • Fits Coldsaver and Tempguard
HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

  • Universal 11-pin harness
HAE00001

Linear Wall Station

  • Wired wall station with light and lock features.
  • For LSO LDO LCO
3002-200FT

Gum Hose 1/2" ID 200' Spool

  • 1/2" inside diameter
  • Installed in bottom "U" rubber for use as a safety edge
1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4" • DIE # ES18191
27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2547
R5115

Bearing 1" Commercial with Flanged Retainer Football Style

  • 1" Commercial bearing pressed in a Flanged Retainer Football Style
  • Type: Steel Bore: 1"
  • Inner Race Offest: 13/64"
  • Rated Load Cycles: 250 lb @ 10000 cycles (8')
DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

  • 32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
  • Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Maximum Door Height: 32'-1".
  • Rated Lift per Drum: 1000 lbs.
  • Max Cable Diameter: 1/4".
    • .......more details
RN1127

Roller 2" Nylon 7" stem 11 ball White

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 6.31" Overall Length: 7.25"
  • Box qty: 150 Box weight: 65.5 lbs (2-7-11 White Nylon)
D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

  • Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
  • Works with most LiftMaster gate operators
  • Won't work with Elite Series Mega Arm Slide & Swing
  • Simply plug it into the harness already in the operator
  • Loop lead-in wires connect to operator terminal strip
  • Gold plated control contacts
    • .......more details
Installation ManualSell Sheet
4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Random Coded

  • Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
  • Can be used for larger vehicles with higher cabs as vans various trucks
  • 20-25 foot detection zone
  • Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
  • Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
  • Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
ALUM-5P5

Aluminum 24" x 100' Spool Graphite # 5P5

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P5
  • Reverse side is #431 Bright White
Colour chart
02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

  • Swivel end
  • Nema 1
  • Same as Pull Cord
CHAIN036

Manaras Jackshaft Drive Chain #60 - 1R10'

  • Includes 1 chain link
27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

  • Zinc die cast construction.
  • Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
  • Cross Reference: W #2518
  • 2-3/16" I.D.
89493

Marantec RPM Sensor with Wire Harness

  • For use on M-line/Q-line/EOS models
R-831-P

FL-Allstar 1-Door O/C/S Receiver 107480-311 MHz***NLA

  • This receiver comes in a metal enclosure.
  • It has three isolated contacts to open close or stop the door. If your operator can be controlled by three button station then our R-831-P receiver and commercial remote controls will work with your operator.
  • Manufacturer's model number: 190-107480
  • Dimensions: 9 1/4" x 6 7/8" x 1 1/4".
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
Q230

LiftMaster Mounting Bracket (2 pcs) MIR-1 (K77-50240)

  • Steel Bracket Mounting Plates (2) For Elite Miracle and LA500 Operators
  • Dimensions: 9" x 2-1/4" (1/2" holes) and 6" x 2-1/4" (5/8" hole)
17335

Doorlec DC-3100T 4-btn O/C/S Compact Transmitter 301 MHz

  • 3 buttons for O/C/S and 1 button for turning lights ON/OFF
  • Includes 12V battery
  • Dimensions: 3-1/4" l x 1.5" w x 1/2" thick
DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

  • Activates two devices
  • Wire lead antenna
  • 12 and 24 Volt models
  • Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
  • The receiver can be activated by any of the Delta-3 format transmitters
  • Mounting bracket supplied
    • .......more details
Installation Manual
RESET-12A-32V

Doorlec Reset 12A 32V Overload

041-0495-000

LiftMaster Keypad Battery Cover

  • Replacement battery cover only
  • Compatible with L979S L979M and L979U
70578.3136

Todco Bottom Seal 98" Long *** By Quote Only

MB-01204

Micanan Electric Motor Only 1/2HP 575V 3PH

  • C-Flange motor fits: GT GH GHC GSD
LJH-353-1-RH

Doorlec 1 HP 575V 3PH Jackshaft Operator

  • Model LJH lasts an average of 10 million cycles
  • Available with ⅓ HP to 1 HP single-phase or three-phase motor and is equipped with self-adjusting solenoid brake
  • LJH installation is universal regardless of side (left or right)
  • Speed is approximately 1.4 feet per second or about 0.3 meters per second
  • Comes equipped with a manual chain hoist
1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws
LZR-H100

BEA LZR Gold-Black BLK-02 H100

  • Laser scanner for gate and barrier applications.
  • Provides four laser-based curtains offering a three dimensional detection zone.
  • Detection curtains are highly configurable and can be set up for activation and presence detection in vehicle sensing applications.
  • Effective alternative to induction loops.
  • Max detection range: 32'x32'
  • Cable length: 33'
    • .......more details
LZR-H100 User Guide (EN)LZR-H100 Cut Sheet (EN)LZR-H100 User Guide (FR)LZR-H100 Cut Sheet (FR)
TDC1222-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #41 chain pack (TDC41-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
MPB-3

Doorlec Open Mushroom Stop Lockable Close Push Button Station

  • Green (Open) Red (Mushroom Stop) Black (Close) push-button station
041D0239-1

LiftMaster End Panel Replacement Kit

  • For use with various LiftMaster® and Chamberlain® 1/2 HP WiFi® Chain Drive and Belt Drive Garage Door Openers
41832R.S

Genie Service Head 6070H/B 6170H/B

  • FOR REPLACEMENT OF JACKSHAFT OPERATOR SHAFT RELEASE OR MOTOR ASSEMBLIES
  • Head Service Kit for 6070H/6070HB and 6170H/6170HB
  • Special Order Price by Quote Only
  • This kit includes the complete motor but does not include the circuit boards transformer or cover for the 6070/6170 unit.
FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

  • The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
  • The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
  • Control Board: model 780D
OSH-6113-M-N1-RH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
P-535T

Pulsar 3-btn 27-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 27 doors
  • 8 dipswitches 318 MHz
Programming instructions
041-0365-000

LiftMaster Sensor Eyes and Brackets 1997-Current

  • For use with various LiftMaster® and Chamberlain® Belt Drive and Chain Drive Garage Door Openers; manufactured after 1997.
  • Complete kit includes: (1) Sending sensor eye (with LED) (1) receiving sensor eye (with LED) (2) replacement brackets and replacement hardware.
  • Also known as or Replaces: 041A5266-1 041A5266-3 41A5266-3 41A5266-1 12D584-1
K41-0242-000

LiftMaster Output Sprocket INSL24UL

1-0241

RW Stay Roller 66 Black/Grey 2" Dia

  • Special order item
  • For use inside doors and can be fastened to concrete with expansion bolts.
  • Steel frame with a black enamel finish and a grey iron wheel.
  • 2-inch diameter roller
5415-2

EMX RAVEN Dual Relay Microwave Motion Sensor

  • Distinguish between vehicles and pedestrians
  • Two configurable relay outputs
  • Adjustable sensitivity and cross traffic suppression
  • 8-23 ft (2.5-7 m) mounting height
  • Optional remote control for easy programming
210-0057

TNR Doors CurtainLok Kit HDXL9 5/Kit (10 pcs) ** Price by Quote Only

  • Natural UHMW-PE 5 Lok's
  • Sold as a kit of (5) complete loks that require 2 curtain loks and 2 screw (10) of each piece for 5 loks
10RD433

BEA Digital Receiver 433 MHz

  • Receiver with integral sequencing "learn" buttons (for vestibule sequencing) pulse/toggle functionality and additional hold time.
  • Operating temperature: -10 to 55C
  • 12-24V AC/DC
  • Max No. of Programmed Units Per Receiver: 100 Transmitters