Devanco Canada - Get The Right Garage Door Opener‎ and Parts

60-7248-81111

Wheel Chock Safety Pkg incl'd: orange urethane chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 811-11 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Not For Use on Ice
High Visibility
Orange Urethane
Size: 11" wide x 8" long x 8" high

60-7248-SC8

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) SC-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
"Claw" Like Bottom Assures Dependable Grip on Any Surface
Chock Fits Snug Under Tire Contour for Maximum Holding Power
Often Preferred For Snow and Ice Conditions
Light Weight and Reliable
Size: 7" wide x 11-1/2" long x 8" high

.......more details

IC-10

Wheel Chock IC-10 Ice Formed Steel Tooth Grip

"Tooth" Like Bottom Grips Icy/Slippery Ground Surface
Powder Coated Yellow for High Visibility
Formed Stee]l
Size: 8" wide x10-1/2" long x 9-1/4" high

212SE

Nortek Linear Weatherproof Keypad

120 users
Indoor/outdoor self contained brushed metal housing
Surface mount vandal resistant design
One piece housing suitable for wall post or gooseneck mounting
Durable metal Braille alpha-numeric keys
4 on board programmable timed relays

.......more details

CAPCELL

LiftMaster Cellular 4G/LTE Modem with Wifi

Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
Sign up with your preferred carrier or add on to your current plan.
Avoid trenching and wire pulling for speedy installations.
Eliminate plain old telephone service (POTS) and improve reliability.
Compatibility: At&t® Verizon® T-mobile® Bell® Rogers™ Telus®
Capacity: Connect up to 4 wired or multiple Wi-Fi devices

.......more details

MM00284

Micanan Disconnect Arm PRO-HHD MSI0277

MM00021

Micanan Disconnect Lever MSI0012

MM00015

Micanan Solenoid Lever Gearhead (MSI0031)

MR-00021

Micanan Trolley Chain Drive # 41 792 Links for 3/4 1 HP 14ft High Door

L

Molded Rubber Bumper Black 18" L x 8" W x 18" 4" Projection 3-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
18" L x 8" W x 18" 4" Projection

.......more details

R

Molded Rubber Bumper Black 13" L x 12" W 4" Projection 4-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 4 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

LB1210-36

Laminated Bumper Standard Black 10" x 36" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-14

Laminated Bumper Standard Black 12" x 14" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

Q080

LiftMaster Dolly Latch Kit K75-50138

For Liftmaster trolley operator HCT

TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

8010

LiftMaster DC Chain / Cable Drive Garage Door Opener ***Discontinued***

Customized DC Motor with soft start/stop action.
Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
Security+2.0 increases remote control range and reduces interference for consistent operation.
PosiLock® electronically protects against forced openings.
The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)

.......more details

LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft ** price by quote only

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

MK-00019

Micanan 3-Phase Overload Base

Base only

K94-36934

LiftMaster Main Wiring Harness L5

R2

Erone Radium 2-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

NUT015

Manaras Hex Nut 5/8-24 UNEF

LA500-1PKG-XLMU

LiftMaster Residential / Light Comm. DC Swing Gate Op. Extra Large Control Box UL325 (Includes LA500CONTXLMUL (K74-39309-1) LA500DC (2x) 29-NP712 LMRRUL)

LA5001PKGXLMU replaces model LA5001PKGXLMDC
Updated unit complies with new UL325 code revised Jan 2016
System now requires monitored secondary entrapment devices unit will include LMRRU safety photo eye
Includes one LA500 arm XL control box receiver unit and photo eye and 2 -7amp batteries
Residential arm style swing gate operator with Extra Large control box and battery backup system
Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.

.......more details

9-22-1

Offset Strut Plate

PRO-X_MOD-1HP

Micanan Explosion-Proof Modification N-7/N-9 for 1/2HP - 1HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

3BLM

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose

Open-Close-Stop
Dimensions: 7" h x 2-3/4" w x 3-1/2" d
Exterior surface mount

K20-1075B-2TLP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph L3 L4 TEFC

T-50-H

FL-Heddolf 1-btn Transmitter ID220-1KA-311 MHz ** Discontinued

Keystone-Heddolf single button FL T-50 compatible remote
9 dip switch format
9V battery and metal clip included

MX00037-120V

Micanan Brake Assembly for PRO-J/H 120V Solenoid included

ALUM-5P3

Aluminum 24" x 100' Spool Espresso # 5P3

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P3
Reverse side is #431 Bright White

Colour chart

109007

Allstar Slide Switch Only Ivory *** Discontinued

ABC selector switch only

3PHCONV

LiftMaster 3-Phase Conversion Kit

The transformer kit will convert an input voltage of 208 / 240 / 480 / 575 3 phase VAC to an output voltage of 120 VAC.
Included in New 3-Phase Transformer Kit: Transformer with bracket (2) Cable ties Bushing Wire sleeve 2’ (.61 m) (5) Wire nuts Mounting bracket 10-36745 and mounting hardware (for installing on CSW24U operators) (6) Operator rating replacement labels Accessory outlet rating replacement label
Compatible with SL3000501U SL3000101U CSW200501U and CSW200101U AC gate operators only

HW0775

Low Headroom Quick Close Device 2" track Sold as a Pair

Includes 1 RH & 1 LH bracket
Heavy Duty for doors up to 16' x 16'

Diagram

39537R.S

Genie Control Board

Replaces any circuit board starting with 37028
Does not come with new housing
Compatible with models 1022 1024 1042 1026 2022 2024 2042 2026 and 2027

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

5001-7-WHITE

Residential Side & Top Weather-Strip 7' Long - White

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

RB741

Linear / GTO 1-Button Transmitter 318 Mhz

Standard transmitter included with all GTO gate operators
Much smaller in size than previous model and improved signal range
The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
It is compatible with GTO and Mighty Mule gate operators
The code settings are the 9 dipswitches located inside the cover.
Measures: 2-1/2 H x 1-1/2 W x 9/16 D.

.......more details

PRO-HHD-5053U-RH

Micanan 1/2HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1/2 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

PRO-H-7553U-RH

Micanan 3/4HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

DOCK-SEAL

Special Order Dock Seal Price by Quote Only

Made to order Models R-100 R-600 & R-700
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
Custom Logo available

.......more details

R-100 order form R-600 order form R-700 order form Catalogue

PRO-GHC-10021U-R

Micanan 1 HP 230V 1P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

Installation manual Specification sheet

41A5658-1

LiftMaster Dual Gear & Sprocket Assembly

This complete kit is compatible with 3/4HP LiftMaster® Models 8587/8587W; and various dual AC chain drive garage door openers.
Kit includes: helical gear and top hat assembly worm gear wear bushings grease and hardware needed to replace the chain drive gears.

47DCT

LiftMaster Receiver Logic Board Sec+2.0 Non-MyQ

047DCT is a replacement Security+ 2.0® receiver logic board.
This replacement board does not feature MyQ® technology.
This 315MHz receiver logic board is compatible with various LiftMaster® AC chain drive and belt drive garage door openers; made after 2011.
The unit will feature a yellow learn button.
Same as 47DCCR1 47DCCC1 47DCCL1 047DCT41D8060 1D8060

MR00006

Micanan Hand Chain Sold by the Foot

DOOR HEIGHT X 2 LESS 4 FT

PRO-GH-10053U-R

Micanan 1 HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

10FT-CHAIN-LDO

Linear 10ft Chain T- Rail for LD050/LS050/LDCO (HCT10C)

10ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned

30257T

Genie Coupler Screw Drive Units

Used for attaching the screw of Genie screw drive rail to the motor head.
This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
To check and replace that part remove the two screws holding the rail to the main power head
Mounts on rear of opener rail and fits in motor head.

APOW1

LiftMaster Transformer For Roboswing & Roboslide Gate Operators *** To extent of Inventory

Elite Robo plug in transformer was 18VAC now replaced by 25V California energy compliant
As of March 2008 transformer has been changed to a 25 VAC self resetting unit that is to be used as direct replacement for the old 18vac units

MOD008

Manaras Double Limit Switches Mod. (Per Side)

An extra SPDT pole is available to control auxiliary features such as lights fans etc..
The additional pole must be specified on either the normally open and/or normally close contact as well as on the opening and/or closing sides
Modification upcharge is charged per side

MV-00278

Micanan Cutler Hammer Reflective Photocell Kit 24V 0-25ft Range w/Brackets (MK00371/MV00371) *** No Longer Available. Use 60-2728 instead

Includes eye reflector and bracket
Same as MK00371 Eaton 1450E-6514

PRO-GH-5011U-R

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

MGJ-5011U-LH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Left Hand

MGJ is designed for use on rolling grilles and shutters.
Maximum recommended duty cycle: 12 cycles per hour.
Heavy-duty wormgear-in-oil-bath speed reducer
3-button station for open/close/stop functionality
315 MHz radio receiver is integral to the Medium-Duty Logic board
UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)

.......more details

Installation manual Sell sheet

029-98100

T-Style Replacement Door White Stainless Steel Package 029-98100

Replacement door size between 98" wide x 100" high
Painted white
Stainless steel package
Includes Hinges Rollers and Cable

MA003

LiftMaster Electric Motor Only 1/2 Hp 24VDC BM

Same as: MA003M MA-003 MS003 20-60000-1
Used on Liftmaster Mega Arm gate operators

37502

Doorlec DC-2000 Electronic Circuit Board for Constant Pressure Close

Works in all Doorlec model openers except R-99
Input power to board is 120V
24V DC available on terminals 9 & 11
Accessory power on terminals 1 & 11
Programmed to work with constant pressure to close

50-HERK-RC2

Hercules Infrared Programming Remote Red (50-HERK-RC2)

Conveniently choose from 8 different preset comfort functions to adjust detection fields mounting heights relay hold interval cross traffic optimization direction recognition people/vehicle separation slow motion detection turn on/off filter functions open the door manually and much more
Bidirectional
Fine-tune the motion detector from the ground without guessing if all the settings have been received by the sensor

4059GY-216

Garex Thermo Moulding 3/4" Beading Gray 18ft

White and Black also available

MG00004

Micanan Belleville Washer 13/16 ID x 1-3/16 x 1/8 (8 required per operator)

PRO-H/HB operator parts
6 required per operator

DM54LC-COATED

Special ends 2023-07-31

Cable Drum High Lift 54" 400-54HL Specialty Coated Pair

Use for Commercial Highlift Doors
Maximum Door Height 120" + Highlift
Maximum Highlift 54"
Lifting Weight Per Drum 275 lbs.
Resists Chemical/Moisture Corrosion
Abrasion Resistant

.......more details

27191A

Genie Opener Sprocket 10 Tooth

10 Tooth Sprocket.
For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.

PRO-GH-10083U-L

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

MP00054

Micanan Track and #410 (#48) Chain for 8' h Door *Actual length 126"*

For 1/3 & 1/2 HP Micanan trolley operators

MD00420

Micanan Flex Coupling Lovejoy 3J x 3/8"

26253

Doorlec Shaft 9-3/4" x 5/8" Keyed LJ / LJH

12131

Doorlec Brake Disc 4" x 5/8" Keyway

Fits Doorlec model SGOH

K10-37955

LiftMaster Chain Guard with Mounting Hardware HCT

.312-6-L

Cut-to-Length Torsion Spring .312 x 6" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

P220-2K

Heddolf 2-btn Transmitter 8-Dip Switch 318 MHz

Allstar compatible remote

34101

Doorlec V-belt Pulley 9" x 5/8" bore

Fits model ETB-3

19054

Doorlec VBelt 5L380

works on model SWGO

MK-00012

Micanan Reversing Relay 24VAC Coil DPDT Flange Mount

Q089

LiftMaster Trolley Body Assembly Kit K75-50147

For Liftmaster trolley operator HCT
Kit includes: trolley body cover trolley wheel shaft installation screws ring clip plastic plugs and lock with keys set

E3JM-30FT

Omron Thru-Beam Photoelectric Sensor Nema 4 0-30ft Range

Easy-to-wire terminal block
Built-in timer offers selectable ON-delay OFF-delay and one-shot
Relay or transistor output models
Light-ON/Dark-ON operation switch selectable
Model: E3JM-10M4-US

37302R

Genie C-Channel Belt Extension Kit for Silent Max and Quiet Lift models ** Price by Quote Only

The extension kit for C-channel belt drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door
For Genie silent max 1000 and quiet lift 1200 belt-drive garage door openers only

FRONTIDLER007

Manaras Front Idler Assembly #48 (#410)

ULT-MVP-2-D-TEK

EMX Industries Multi-Voltage Loop Detector 2-Channel (ULT-MVP-2U)

Combines small size with 9VDC to 240VAC input range.
Size: 73 x 38 x 78mm
ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
Ten (10) sensitivity adjustments
Four (4) frequency settings
Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence

.......more details

SL332COP

Copper Sleeve 3/32" 100 Sleeves per Pkg ** Price on request

Oval sleeves ONLY
Stops sold separately part # ST332COP

D-2-6

Keyed Disconnect Device 6ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

CR-2

Battery CR2 3V Photo Lithium Battery

Camelion brand

MA007

LiftMaster Cogged Belt 4L290

Used on Mega Arm gate operators

757-325

Fasteners Lag Screw Hex Washer Regular Profile 5/16" x 1-5/8" 325/Bag KH

7/16" head
Ideal for fastening tracks to the wall

ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 431

Colour chart

MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

BCH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH751-LH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** NLA

Replaces the 4 wire AO Smith electric motor

OTBH-6232-APT-C

Manaras Trolley Operator 1/2 HP 208V 3 Ph Apartment Model with Contactor

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
30 cycles per hour up to 100 cycles per day
APT model incorporates pillow block bearings on input shaft
A 4L/A v-belt

.......more details

Installation manual Sell sheet

R5221

Sheave Strap 4"

Sheave strap also known as fork only

R5220

Sheave Strap 3"

Sheave strap also known as fork only
Same as part number 302

BCH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand ***Replaced by CRBH753L5-LH

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

Installation manual Manuel d'installation Sell sheet Brochure

ALUM-547

Aluminum 24" x 100' Spool Sable / Sablon # 547

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 547
Reverse side is #431 Bright White

Colour chart

770

Fasteners Hex Serrated Flange Head Bolt 3/8-16 x 1" 1000/Box

Zinc
Grade 5

ODCC-SPEC.ORDER

Wayne Dalton Special Order *** Price by Quote Only

Misc. code for all special order items

RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation manual Manuel d'installation Sell sheet

41AC150-1M

LiftMaster Electronic Circuit Board Assembly 315 MHz *** NLA Repl by 41AC050-1M

For Sears / Craftsman garage door opener

103146

Marantec Synergy 380 Residential Opener 1.1 HPCS Head Only

Equipped with over 1 HPCS of pull and push force
Ideal opener for large and heavy applications like carriage house doors or large wind-loaded doors
315MHz 2-channel remote control is included. Multi-bit code technology ensures interference free performance
Soft Start and Soft Stop functionality is reducing wear and tear on the operator system garage door and hardware
HomeLink compatible
Comes with 1.2 mm heavy-duty rail

.......more details

Installation manual Sell sheet

SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details