Devanco Canada - Get The Right Garage Door Opener‎ and Parts

ATSW

LiftMaster Light-Duty Dual-Rated Trolley Operator

Wi-Fi enabled – completes the LiftMaster Light-Duty product family with Wi-Fi on board
Built-in Wi-Fi enables access to myQ® or myQ Business™
Security+ 2.0®
Dual-sided lighting with light lenses provides superior illumination
Electronic limit setting for easy installation/setup
Compatible with myQ Accessories (827LM Remote LED Light 825LM Remote Light Control 823LM Remote Light Switch 829LM Door Monitor
POSILOCK – drives the motor to close to protect against forced entry
Same I-beam rails as ATS2113X
600 in.-lb./sec. rated load (300 in.-lb./sec. for ATS2113X)
Dual commercial/residential rating that meets commercial duty-cycle rating of 8 cycles/hour
10-tooth drive sprocket enables ATSW to move the door faster than the 6/8-tooth residential sprocket

LMHS2475WPADA

LiftMaster Horn / Strobe 12/24VDC White W/NO

FA-NHEX-58-18-J

Lynx Jam Nut 5/8-18 for MCJH

SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

LA500XL20W

LiftMaster Single Arm Solar Package for LA500 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA500DC)

Kit Includes: LA500DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA500DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016
Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.

Manuel d'installation Installation manual Sell Sheet Brochure

MD-00280

Sprocket 41B32 x 1" 1/4" Keyway 2SS 5/16 Small Hub

2 set screw 5/16

DS350

Heavy-Duty Commercial Non-Insulated Rollup Sheet Door with Interior Slide Locks

Heavy-duty Model DS-350 has statewide Florida product approval for wind load protection up to 190 mph.
This door is ideal for commercial applications with openings up to 16’ wide by 16’ high.
Heavy-duty 13-gauge guides attach to 8-gauge wall angles to give maximum wind load protection.
Installation to masonry or steel is quick and simple with no special preparation or overhead tracks needed.
A wide selection of colors to choose from
Made to Order

.......more details

MK-00660

Micanan 1 Channel Hand Held Transmitter (for APT applications) Sold Individually

Sold in packs of 10. Priced per transmitter

27028

Doorlec Electric Motor 3/4HP 115/230V DC403C

Bolts to gearhead (c-flange) openers

Wiring diagram for 120V Wiring diagram for 230V

7-6095

RW Hanger 323 For use with #31 track 1 only

Wheels: 2-1/8" diameter Formed Steel
Apron: Formed steel vertically adjustable 5-3/4" long x 3-1/2" wide
Pendant: 1/2" diameter Steel
Door thickness: 1-3/4" inches to 2-1/2" inches
Included: 1 carriage bolt 2 flat head stove bolts
Capacity: 1 pair for a maximum of 400 lbs

.......more details

Specification Catalogue

CP-LX740

Lynx 3-btn Transmitter 372 MHz for Commercial Op. with UL325 Board

UL325
Works on the new Lynx commercial operators
For 3 doors
Not compatible with the new 372HMz residential operators

Programming instructions Compatibility chart

15-19478

LiftMaster Sprocket Assembly

For model H (2005-present)
48B32T with hub

420001

Linear Wireless Keypad Multi-Code 300 MHz

Compatible with 300 MHz Multi-Code receivers
4-digit access code
Backlit keys
Weather-resistant keyless entry station transmitter
Easy access to battery
Power: 9-volt battery

.......more details

029-98090

T-Style UDI Replacement Door White Stainless Steel Pkg 029-98090

For openings within 98" w x 90" h
Hardware attached balancer assembly not included
Manufactured to exact size

LIMIT025A

Manaras Single Snap-Action Limit Switch with 'S' Lever

For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

SOLID_SHAFT_18'

Solid Shaft 1" Keyed 18 ft Galvanized

Actual length is approx. 18'-1"

PRO-HB-7511R-LH

Micanan 3/4HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Includes solenoid brake
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

110995

Allstar Classic 3-Btn Transmitter 318 MHz *** Discontinued

Open/Close remote for 1 door
Quick code platform
Compatible with both MVP and traditional Allstar receivers
Replacement for 9921T 9931T 8822T 8832T 8833T 9921MT 9931MT 9921TK 9931TK 8832TK and 9931TK6

Programming Instructions

1005-1-3/4-10

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

Controls garage door operation and opener lights
Easy and fast programming
Compatible with Security+ 2.0 and MyQ remotes and accessories

Installation Manual Manuel d'Installation

HD-15

Reflector Hood for 3" Round Reflector

Black/Charcoal

111010.0001

Overhead Door Serpentine VBelt 27" (6EPJ683)

Serpentine belt 27" long
Fits Genie GCL-T Trolley operator
Some Overhead drawbar models: JST RSX RMX

41B5424

LiftMaster Belt Idler Pulley and Bracket (Built Years 2000+)

This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers that utilize a T-rail
Fits models: 2500 2580 3280 3850 3500

21-14182

LiftMaster Transformer 120-240V 24VAC 20VA

120/240V Primary 24V Secondary 20VA 50/60 Hz
Same as K21-14182 used on L5 commercial operators

41DJ001

LiftMaster Circuit Board with Plate for 3800 3900 41DJ001B

Board: Security+ 315 MHz
For jackshaft models; 3800 3800P 3800PLD & 3900
Also known as 41DB001-2

Programming Instructions Instructions de programmation

5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

Most common side seal for Whiting Dry Freight doors.
115 inches will fit almost every size door.

19-40240D

LiftMaster Drive Chain #40 10' Box Black Oxide

Complete kit includes: Drive Chain 10' (#40) and (2) Master Link Kits
Black Oxide coating provides corrosion resistance
Suitable for use exterior applications

HD3120-BLACK

Commercial 3" Inside Slide Lock Black Powder Coated

Track use: 2" or 3"
Throw: 2.62"
Slide bar: 0.138"
Individually wrapped

K002D2085

LiftMaster Dock Door Interface Board

For use with DDO8900W

L958W

LiftMaster Smart Control Panel Security+ 3.0

LCD screen displays temperature time and maintenance alerts.
Motion detector activates the garage door opener lights as soon as movement is detected.
Timer-to-Close allows you to automatically close your door after a pre-programmed number of minutes.
Lock function blocks the garage door from being opened by remote controls.
Includes a push bar for garage door opener operation and a light control button.
Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.

.......more details

A10U49

Erone Long Range UHF Reader U4GO 33FT

The readers which operate with AES128 encryption offer secure access in settings like parking facilities gated communities campuses hospitals and more
Stand-alone or Wiegand mode
Up to 33' (10 m) read range
Detects vehicles up to 50 mph (80 Km/h)
Includes receiver power supply and mounting bracket

Installation Manual Sell Sheet

D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

Power Supply: 12-24 Volts AC/DC
Current Consumption: < 9 mA
Operating Temp: -40°F to 180°F
Surge Protection: Zener Diode /MOV
Output Relays (2): 1Amp 30 VDC
Loop Input: Transformer isolation lightning and transient protection (1)

.......more details

Manual - LP-D-TEK Spec Sheet - LP-D-TEK

CHAINTENSDC

LiftMaster Chain Tensioner 1" MAXUM DC

For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
Spreader for Maxum operators and 1" door shaft

MPB-3

Doorlec Open Mushroom Stop Lockable Close Push Button Station

Green (Open) Red (Mushroom Stop) Black (Close) push-button station

041D0239-1

LiftMaster End Panel Replacement Kit

For use with various LiftMaster® and Chamberlain® 1/2 HP WiFi® Chain Drive and Belt Drive Garage Door Openers

DS-REPAIR-KIT

Inflatable Dock Seal Patch 30" x 30" Vinyl with Glue

HSLG-111

Linear Commercial Slide Gate Operator 1 HP 115V 1 Ph - Heater not Included

Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
Integrated warning beeper during gate movement
15 diagnostic LEDs on board for ease of setup and troubleshooting
Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
On-board APeX Controller three-button control station

.......more details

10MS31U-B

BEA Magic Switch Touchless Stainless Steel Single Gang

BEA’s MAGIC SWITCH® provides a highly accessible and germ-free door activation without physical contact.
Reduce touchpoints in fast-paced environments that depend on sanitation like healthcare retail industrial and commercial settings.
Using microwave technology BEA’s MS31 produces a detection field with a reliable and consistent transmission in interior and exterior applications.
Capable of detecting a moving hand cart or wheelchair.
Operating temperature: -20 to 55C
IP54

.......more details

JANUS-M650

Janus Non-Insulated Mini Storage Door Roll-Up Spec Order

650 Series mini storage roll-up door
The 26 gauge corrugated door curtain is manufactured from full hard galvanized grade 80 steel and coated with Super Durable polyester paint
Available in sizes up to 10’0” x 10’0” and in over 20 different colors
During production each spring is coated with a generous amount of grease that penetrates the innermost pores of the spring with additives displacing moisture and preventing the formation of rust and corrosion
Enclosed in a tube for lifetime protection
Special Order item

.......more details

Installation Manual M650 Sell Sheet

ALUM-5P2

Aluminum 24" x 100' Spool Rockwell Blue / Bleu Rockwell # 5P2

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P2
Reverse side is #431 Bright White

Colour chart

40659R

Genie Universal 4-Button Remote

Pre-programmed settings and a unique programming feature give homeowners a simplified compact multi-door and gate option
Easy to set up
Compatible with most major brands sold in the USA including: Overhead Door Genie Chamberlain Craftsman Ryobi Sommer Linear MegaCode Marantec Wayne Dalton Liftmaster FAAC Xtreme

TRANSF112

Manaras Transformer 575V-24V-50VA

LMTBUL

LiftMaster Monitored Through Beam Photo Eye w/ Heater Nema 4X

Tested and evaluated by UL and meet UL 325 requirements.
Long Range powerful beam provides reliable performance.
Sensing distance up to 90 ft.
Anti-Fogging Lens
NEMA 4X rated
Wireless network mode eliminates the need to wire between operators in dual-gate applications.

.......more details

Installation manual Manuel d'installation Product guide

ME00010

Micanan Input Shaft PRO-J 3/4" x 11-3/4"

Micanan has permanently changed the length to 11-3/4" from 11-9/16" (2025)

CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

Same as Garaga CF101

4059GY-216

Garex Thermo Moulding 3/4" Beading Gray 18ft

White and Black also available

110550

Allstar MVP 3 Channel 24V 3 Terminal 4 Wire Receiver 318 MHz *** No Longer Available

3 channels 4-wire 3-terminal operator connection
Wire antenna included
Compatible with Allstar Classic Allistar and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683
RF frequency: 318 MHz

.......more details

Programming instructions

41A3504-1

LiftMaster Antenna Kit with Adapter

Designed to work with the 433MHz receiver logic boards
Kit contains: Antenna Coaxial cable adapter and antenna bracket

50180

Doorlec Brake Assembly 120V

CP-LX720

Lynx 3-btn O/C/S Transmitter 372 MHz for Commercial Op. with UL325 Board

UL325
Works on the new Lynx commercial operators
Open Close Stop transmitter
Not compatible with the 372MHz residential operators.

Programming instructions Compatibility chart

DC2000SL

LiftMaster Power Backup *** Discontinued

Keeps traffic moving during a power outage
Opens the gate when power goes out to allow vehicles to enter or exit
When power is restored the gate will return to normal operation
Compatible with operators: SL3000UL

41D7675

LiftMaster Receiver Logic Board 2.0

Also known as: 45ACT

D525-54-HL

Cable Drum High Lift 54" D525-54HL Torque Force Pair

Maximum hi-lift: 54"
Capacity: 500 lbs per drum
Max. cable size: 3/16"
Cable length: Floor to shaft center 66" minus amount of Hi-Lift
Cross reference: DNS 54 OMI 54HL M134-1375

25E10050

Truck Door Center Hinge Black E-coat finish for Todco Roll-Up Doors

Steel construction Black E-coat finish

69C

Skylink 1-Button Universal Keychain Remote *** No Longer Available

It's small enough to carry in your pocket or purse
The 69C is a great universal remote and it is compatible with almost any garage door up to 2007 (see compatibility chart for exact brand names).
It has just one simple button and a unique keychain attachment which makes it ideal for use with convertibles motorcycles bicycles or any other vehicle without the usual sun visor.
It connects to your garage door using a series of DIP switches making it simple to program it even if your garage door dates as far back as the 1980s.
Model 69c is not compatible with Stanley "Securecode"
Compatible frequency: 390/318/315/310 Mhz

.......more details

Compatibility Chart

K72-12506

LiftMaster Clutch Shaft Kit (1/3 & 1/2HP)

For 1/3 and 1/2 HP models - L5

7FT-CHAIN-LINEAR

Linear 7ft Chain Rail for residential openers (HCT7C)

7ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 carriage house I-rail conversion kit

RELAY021

Manaras Socket Base for Loop Detectors ZPD11

11-Pin base

1010-PER-FOOT

Replacement Sweep for One-Piece Door Grey Vinyl

Fits into the bottom of one-piece 'Stanley' doors.
Sold per foot
2" wide

SELWR433

Erone Wiegand Receiver 433 MHz

26 bit
12-24V AC/DC input voltage

Wireless System Chart

302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
The 300 MHz frequency is compatible with standard Multi-Code transmitters
The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
Operates on 12-24 volts AC or DC power
Two channels
Whip antenna

.......more details

Programming Instructions

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

197LM

LiftMaster Wire Channel for T-Rail 5ft Replaces 27LM ***Sold per piece*****

Plastic channel attaches to the T-rail
Hides up to 3 pairs of wire
Each piece is 5ft long
Box quantity of 100

PS31L-NS11R1M00

Carlo Gavazzi Utility Switch

Switch DPST-NO/NC Chassis Mount
Actuator Type: Side Rotary Adjustable Roller
Termination Style: Screw Terminal
Ingress Protection: IP66 - Dust Tight Water Resistant
Switch Function: On-Mom Off-Mom
Current Rating (Amps): 5.5A (AC) 2.8A (DC)

.......more details

Installation Manual

41B0139

LiftMaster MVIS Motor Isolators 4/box

MK-00653

Micanan 3-btn O/C/S Transmitter 372 MHz

Hand held transmitter for on-board receiver with smart 10.0 board only

Programming Instructions

93-00240

Truck Door Spacer Washer for Rollers

Used with Rollers to help adjust Roll up doors
Cross Reference: T #80020 W #6 #66 140100

041D7440

LiftMaster Electric Motor with travel module 1/2HP

For various LiftMaster® and Chamberlain® 1/2 HP AC Chain Drive Garage Door Openers; manufactured after 1997

SW-500

Devanco Industrial Spring Winder 500 for 3.75" - 6" Torsion Springs

W-500 is an Overhead Garage Door Torsion Spring Tensioning Tool for commercial and industrial sectional doors with springs ranging from 3.75" to 6". It can accommodate both 1.0 and 1.25 diameter shafts. This device prevents work-related accidents and significantly reduces physical strain during the torsion spring cranking process The SW-500 is designed for use with a cordless drill (Non-impact) with a 13mm socket to make the job faster and safer than using winding bars. ***Richard Wilcox springs require the SW-500-ADAPTER. Technical Specifications:
Weight: 8.6 kg / 18.9 lbs
Length: 77.2 cm / 30.39 inches
Max. Torque: 369lb/ft
RPM: 500-2000
Material: Aluminium steel plastic

.......more details

User Guide Sell Sheet Usage Disclaimer Drawing Specifications SW-500 Drawing Specifications Gear

GALV-331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

BCSI-HV-CONT-BLOC

Pivin Drapeau Contactor Block BCSI ** Price by Quote Only

PCBA-PD3.3

Dyna Hoist/Pulse Replacement Drive Board for DC500-100

2000D

Chain Hoist Direct Drive Assembly 2000 D

Sectional door Direct drive - 1" shaft
Requires keyed shaft
Includes: 2 shaft collars Chain Keeper 1/4" Square Key 2x set screws 5/16-18
Fits 5-1/4" min. offset
Includes 26' of chain
Ratio: 1:1

.......more details

1050-STANLEY

Stanley 1050 Transmitter 310 Mhz 10 Dip Switch

Replaces 2-btn Stanley original remote

SA1929/A19

Automatic Systems Retrofit Logic Board with Drive for BL229 Board and Double Channel Loop Detector

Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)

MA010

LiftMaster Gate Arm Bracket

Designed for use on all Mega Arm gate openers
Bracket will work with either right-hand or left-hand operation gate arm.

84505R

LiftMaster Belt Drive Secure View w/Built-In Camera DC Dual LED Residential Opener **discontinued

Comes equipped with a built-in 130 degree wide angle camera that features streaming video recording capabilities and two-way communication to the myQ app
Integrated Dual LED Lighting System Ultra-Quiet Belt Drive®
Motor: 12V DC 53 RPM automatic thermal protection
Power: 120V AC 60 Hz voltage 6A current rating UL Listed 4' power cord (3-prong)
Speed: 7.2" per second upward 7.2" per second downward
Lighting: Dual light lens LED - 1500 lumens

.......more details

84505R Installation-manual 84505R installation-manuel 84505R Product-Guide 84505R Guide De Produit Receiver Logic Board Conversion List Comparison Chart

7-6097

RW Hanger 150B1 for use with #33 track 1 only

Apron: Laterally adjustable formed steel 11-3/4" l. x 4" w.
Pendant: 3/4" dia. square head bolt with adjusting nut zinc plated
Door Thickness: 1-3/4" to 2-1/4
Included in each box: 12 flat head stove bolts 3/8" dia. x 2-3/4" l. for 150B1 12 flat head stove bolts 3/8" dia. x 4" l. for 150B2 2 carriage bolts 7/16" dia. x 1"â??long 1 lock joint clip for No. 33 track. 2 blinds for track ends
Wheels: 3" diameter Steel
Finish: Zinc Plated Black Enamel

.......more details

K23-34815-1

LiftMaster Stop / Reset Switch Black Face

For use with SL595UL Series heavy-duty industrial slide gate ops

02-103LGO-1

Push Button Station 3-btn Surface Mount O/C/S Nema 1 For LGO Ops only

PBS-3R
Open-Close-Stop
Works with Liftmaster LGO commercial operator
Also known as: 02-103LGO1 02103LGO1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
Normally Open contact on Stop therefore it won’t work on any other LiftMaster operator besides the LGO. The 02-103 will work on all operators.

.......more details

230404

Linear Motor Control Board 5 Relay (w/Brake)

For commercial door operator

SELECTOR-BTN-8L5

Devanco replacement rotating black button for 8L5-OCS

replacement black button but for rotating 8 position selector for 8L5-OCS

41D2052

LiftMaster LED Light Pod Replacement Kit **To Extent of Inventory

For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
Compatible with WLED model
Same as # 041D2052

HAML-SHAFT-ADAPTR

GDI Shaft Adaptor 1" w/Sprocket Vertical Mount Application

MS-00002

Micanan Trolley Track Set 12 Ga. 9'6" (for 7' h. door) Includes 2 Angles Only

Set includes 2 tracks only
Chain NOT included

RADIO-EM932

Manaras 32-Door Dip Switch Transmitter O/C/S

3-button transmitter
Operates up to 32 doors by using a combination of 2 rotary dials and dip switch keys
Open/Close/Stop function
LED Indicator
Soft touch push buttons including a bright red stop button for easy identification
Includes 4 mounting screws and anchors

.......more details

Programming instructions Manual

PRO-GHCB-30053

Micanan 3 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manual Specification sheet

Q230

LiftMaster Mounting Bracket (2 pcs) MIR-1 (K77-50240)

Steel Bracket Mounting Plates (2) For Elite Miracle and LA500 Operators
Dimensions: 9" x 2-1/4" (1/2" holes) and 6" x 2-1/4" (5/8" hole)

10FT-CHAIN-LINEAR

Linear 10ft Chain T- Rail for residential openers (HCT10C)

10ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned

41C5141-1

LiftMaster Square Rail Trolley Kit Chain Drive

Same as: 062313 41C5141 41C5141-1
Compatible with all Chamberlain and Craftsman square rail chain drive models

D22

Allen Bradley 110V Reversing Contactor

K1D6761-1CCMC

LiftMaster Logic Board AC for SL585U & UL SL595U & UL SL3000U & UL

K1D6761-1CCMC is a AC UL325 Logic Control Replacement Board. •For use with SL585 SL585 SL3000 Slide gate operators manufactured after 2016.
This board is backwards compatible for older second generation units but Monitored Photoelectric Sensor (LMRRUL) or Edge Sensor (LMWEKITU & S505AL) to protect the OPEN en entrapment zone are required.
Also known as: K1D9088-1CC K1D6761-1CC

LYNX-6000-BOARD

Lynx 6000 Commercial Logic Board

Replacement logic board for Lynx commercial operators built from 2002 through 2005
Will not work for the ALDJ Model (Light Duty) •

Basic Operation Manual

H12G12-SS

Hinge #12 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

Q074

LiftMaster Coupling (3/4 x 5/8) 3 pcs K75-50130

Fits model HCT
Same as K75-50130

26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Primer Finish
Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.

.......more details

YSG12-24LED

Devanco Stop and Go Light Yellow Housing 12-24V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied

.......more details

Installation Instructions Instructions d'installation Sell Sheet

HOMELINK-REPTR

LiftMaster HomeLink Repeater Kit ** same as 855LM

All 2006 or older vehicles require a repeater kit installation
In 2007 and newer if the HomeLink does not program with opener install a repeater
The remote supplied in the repeater kit must be kept for future programming and is NOT to be used as a garage door opener remote