The 26 gauge corrugated door curtain is manufactured from full hard galvanized grade 80 steel and coated with Super Durable polyester paint
Available in sizes up to 10’0” x 10’0” and in over 20 different colors
During production each spring is coated with a generous amount of grease that penetrates the innermost pores of the spring with additives displacing moisture and preventing the formation of rust and corrosion
Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
The Nice Apollo PS224 is a battery back-up for the L-Bar and M-Bar Barrier Gate Operators allowing the gate opener to use it's no blackout feature so you can have emergency power when the power goes out
Easy wall or post mount vehicle tag/prox card reader can service an entire facility parking garage gated community/HOA or guarded properties.
Integrates into (CAPXL CAP2D) Liftmaster PPWR Passport Receiver and LiftMaster CSW24U 24 VDC Commercial Swing Gate Operator CSL24UL HCTDCUL systems to give access via encrypted-digital code.
Opens swing or slides gates from 20-30 feet distance
26-bit Wiegand Interface console
Encrypted binary protocol signal
Helpful Programming/Testing/Function tri-color LEDs on both reader face and Wiegand console
The product configuration provides four laser-based curtains offering a three dimensional safety zone each capable of 360 in x 360 in (30 ft x 30 ft)
Designed for the detection of people and vehicles in both indoor and outdoor environments
The detection accuracy makes this sensor ideal for high performance industrial doors vehicle flow safety perimeter protection and a variety of applications. Detects objects as small as 2 inches at 30 feet away
IP65
Operating temperature: -22 to 140F
Three visible LED spots provide accurate reference points when adjusting the tilt angle.
Kit includes: MM-00031 wall L-bracket (1) MM-00032 trolley arm 105 degrees (1) MM-00033 trolley extension arm (1) MM-00034 trolley arm sliding bracket (1) MO-00004 trolley arm compression spring (1) and MR-00009 red rope c/w handle and warning label (2)
19X7 SS 3/16” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
Premium grade 7 ply 3/4” panels manufactured with a medium density overlay (MDO) laminated to smooth hardwood outer veneers of Transportation Core plywood all designed for optimum strength and appearance.
2" track and rollers for durability.
Tongue and groove joint.
2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
BM5024 Motor: Irreversible 24 Vdc with magnetic encoder complete with connecting lever and mechanical stop for the closing manoeuvre.
Compatible with 2 foundation metro boxes externally chamfered with mechanical stop on opening: in stainless steel (BMBOXI) ideal for use in extreme conditions and with the new cataphoresis paint finish (BMBOX) highly resistant to corrosion.
Maximum freedom of choice: release from inside or outside two key or lever operated models freely combinable and easy to operate with just one hand.
Recommended control unit: Moonclever MC824H
Features: Simple programming by means of a single key;
For the protection of vehicles doors and safety of people.
Any upward-acting door may be fitted at the leading edge with an electro-mechanical safety weatherstrip.
This mechanism consists of a formed galvanized steel section covered with vinyl impregnated rubber hinged along the full width of the leading door edge.
Can be adjusted to approximately 2½" (63.5mm) to form a tight weather seal.
The hinge linkage is arranged that minimum pressure is required to activate the electrical control switch causing door to reverse direction of travel to the fully open position.
Reverse switch is enclosed in a galvanized housing with a sliding plunger to assure positive actuation every time.
You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V)
and black (0V) wire into power supply
Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
The extension kit for C-channel chain drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door
APT-style operators employ an auto-reconnect trolley with nylon inserts and a resilient-mount motor for quiet operation.
Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
APT operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.
Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion