Devanco Canada

DTKP

Programming instructions

HSLG-221

MDT-4A

Programming Instructions

0-205679

Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.

HAE00023

6X26PO50

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

SW-500-ADAPTER

SW-200

pring Winder 200 is a torsion spring tensioning tool designed for use with a cordless drill (Non-impact). Developed for professionals in the installation and maintenance of residential garage doors. The device prevents work-related accidents and significantly reduces physical strain of door installation work. The Spring Winder 200 is suitable for all residential garage door torsion springsranging from 1-3/4 inches to 2-5/8 inches. Technical Specifications:
Weight: 5 kg / 11 lbs
Length: 56 cm / 22 inches
Max. Torque: 147.51 lb/ft
RPM: 500-2000
Material: Aluminium steel plastic

Sell Sheet

SW-500

W-500 is an Overhead Garage Door Torsion Spring Tensioning Tool for commercial and industrial sectional doors with springs ranging from 3.75" to 6". It can accommodate both 1.0 and 1.25 diameter shafts. This device prevents work-related accidents and significantly reduces physical strain during the torsion spring cranking process The SW-500 is designed for use with a cordless drill (Non-impact) with a 13mm socket to make the job faster and safer than using winding bars. ***Richard Wilcox springs require the SW-500-ADAPTER. Technical Specifications:
Weight: 8.6 kg / 18.9 lbs
Length: 77.2 cm / 30.39 inches
Max. Torque: 369lb/ft
RPM: 500-2000
Material: Aluminium steel plastic

Sell Sheet

E14400M