Devanco Canada

LB410-14SF/P1

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

1-1785BL

206-5017

Gaps of up to 1" (25mm) can exist between the pit wall and the dock leveler sides
58" long weather seal made to fit 6ft dock leveler

PDC-300-075-1.25-40-20

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

026-G019

026-M12-F5

Z9962

Compatible with L5 Jackshaft operators
Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
Precise chain tension adjustments through the adjustment bolt
Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation

RXTA-100

Two-Channel Receiver: Can be programmed to operate one or two doors or for Open/Close or Open/Stop functions.
Universally Adaptable: Works with most available brands/models of transmitters (300-390MHz) including those with rolling code.
9-30Vac/dc input.
FCC approved.

Z9961

Compatible with MAXUM® Jackshaft operators
Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
Precise chain tension adjustments through the adjustment bolt
Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation

Installation Manual

TXTA-KYPD

Programmable 4-digit code for continuous use.
Programmable TEMPORARY 4-digit code for programmable number of uses.
Multi-Brand Adaptable: Works with all Pulse receivers LM receivers (GreenOrange Red Purple and Yellow learning codes) and other receivers with 315MHz or 390MHz.
Powered by 9V battery. (One included in package)