Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K001D8397-1

LiftMaster Power Board 3ph 575V L5

  • This is a 3PH/L5 Power Board 575V Replacement Kit. Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; equipped with current sense
MV-00272

Micanan Key Switch O/C Single Gang Nema 1 Flush Mount

MV-00006

Micanan 3-btn O/C/S w/Key Lock-Out Nema-1 Pushbutton Control Station

  • Flush mount
MV-00004

Micanan 2-btn O/C Nema-1 Pushbutton Control Station

  • Flush mount
MK-00031

Micanan Transformer 230V-24V-40VA

PRO-H-5083U-RH

Micanan 1/2HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
111075.0001

Overhead Door Poly VBelt for RSX and RMX Jackshaft/Hoist Commercial Operators

  • Serpentine belt compatible with Overhead Door standard duty RSX and RMX operators.
  • 6-rib poly VBelt
  • 31"
SD105L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
HAML-MOUNTING-BRKT

GDI Side Mounting Bracket N/C When Ordered w/Operator

OSH-6434-ECB-LH

Manaras Opera-SH 1 HP 480V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
HAML-SHAFT-ADAPTR

GDI Shaft Adaptor 1" w/Sprocket Vertical Mount Application

ME110-2W-BLK-L

Miller Edge 2-Wire Black Left Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical pressure sensitive edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling that allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration.
    • .......more details
Worksheet
PRO-J-10083-U-LH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
.421-6-L

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.421-334-L

Cut-to-Length Torsion Spring .421 x 3-3/4" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.437-514-R

Cut-to-Length Torsion Spring .437 x 5-1/4" Right Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.319-514-L

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.295-6-L

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
.295-514-R

Cut-to-Length Torsion Spring .295 x 5-1/4" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.375-334-L

Cut-to-Length Torsion Spring .375 x3-3/4" Left Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
PRO-J-7523-U-RH

Micanan 3/4HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
2996.3

Truck Door 2" Steel Roller 5" Long Stem Enclosed Bearing for Whiting Roll-Up Doors

  • A Whiting original
PRO-J-7521-U-RH

Micanan 3/4HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
42GRR-AB

Allen Bradley Thru-Beam Photocell RX/TX Long Range 42GRR9001+GRL9040

PRO-GT-10083-U

Micanan 1HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

TRACK-1458-SS

Track Bolt Stainless Steel 1/4" x 5/8"

PRO-GT-5083-U

Micanan 1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
SPRAY-265

Aluminum Touch Up Spray Paint Antique Brown / Brun Antique #265/165 *** To Extent of Inventory

  • 140g
K29-FDCL-500CCB

LiftMaster FDCL Receiver Logic Board with Battery Rev 500

  • Replacement kit charging circuit board firmware and battery for FDCL
ALUM-5P6

Aluminum 24" x 100' Spool Iron Ore / Minerai de Fer # 5P6

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P6
  • Reverse side is #431 Bright White
Colour chart
.393-334-L

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
LM4AH-12

LiftMaster Battery 4.5AH 12VDC

  • Designed to fit Fire Fly III Plus Model of Release Device
  • 12 Volts 4.5 AHR (amp hour rating)
  • Dimensions: 4" Depth 2-3/4" Length 3-1/2" Wide
PRO-TB-5081-U

Micanan 1/2HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-5011-U

Micanan 1/2HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
60-7242

Econo Caution Sign English 14" x 10"

811-11

Wheel Chock 811-11 Orange Urethane

  • Not For Use on Ice
  • High Visibility
  • Orange Urethane
  • Size: 11" wide x 8" long x 8" high
RELAY039

Manaras Relay 3-Pole 24VAC

2200-926

Linear Gear Reducer 60:1 Models SWR SWD

DJ501L5

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
  • DJ operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology
  • Security+ 2.0®
    • .......more details
DM120-125-T/FORCE

Cable Drum High Lift 120" D575-120-1-1/4" Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
C-RING

Contact Ring for Centrifugal Switch in Single Phase Motor

15480

Doorlec Heater Strip 175 W 575 V

MV-00354

Micanan Control Station 3-Btn O/C/S N4 Surface Mount c/w Key Lock-out & Red Pilot Light 24V

L

Molded Rubber Bumper Black 18" L x 8" W x 18" 4" Projection 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 18" L x 8" W x 18" 4" Projection
    • .......more details
B

Molded Rubber Bumper Black 24" L x 12" W 3" Projection 4-Hole 2 Reflectors Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LVB436-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB406-36SF

Steel Faced Laminated Bumper Black 6" x 36" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-18SF

Steel Faced Laminated Bumper Black 10" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB636-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB630-11

Laminated Bumper Black 6" Projection Vertical Installation 30" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB430-11

Laminated Bumper Black 4" Projection Vertical Installation 30" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
WRW

Erone Wiegand Wireless Receiver 433MHz

  • 433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability.
  • KeeLoq® Rolling Code technology ensure ultra-secure transactions.
  • Output: Wiegand 26 bit
  • Power requirements: 12 or 24V (AC or DC)
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
  • Compatible with Centaur and any 26 bit Wiegand-capable systems
    • .......more details
Wireless System Chart
PO17

Overhead Door Bottom Astrigal Rubber for Rolling Steel Doors Sold by the Foot

LA500XL20W

LiftMaster Single Arm Solar Package for LA500 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA500DC)

  • Kit Includes: LA500DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
  • For dual gates order extra LA500DCS secondary arm
  • Updated unit complies with new UL325 code revised Jan 2016
  • Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
Manuel d'installationInstallation manualSell SheetBrochure
HAE00057

Linear LDCO Motor with Encoder

  • For LDCO800 operators manufactured before 04/2011 compatible replacement part number HAE00053 for motor with encoder and HAE00054 for encoder board.
MK-00030

Micanan Transformer 115V-24V-40VA

MG00011

Micanan Ribbed Hex Nut 1/4" - 20 UNC

  • PRO-GHC operator parts
  • 12 required per operator
LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
2806.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Roadside

  • Replacement torsion spring with cones
  • Specs: .139 x 2-3/16" x 13" Long
  • Roadside
  • For Curbside order part # 2807.139.130
Z9001-ACCPS

Pusher Spring HD for Commercial/Industrial Applications Sold as a Pair

  • Universal mounting can be configured to accommodate for limited room at the end of the horizontal tracks
  • Sold as pairs
BB-1

Rubber Button Cover Black for 3BLM PBS

  • Rubber button cover only
RB-1

Rubber Button Cover Red for 3BLM PBS

  • Rubber button cover only
2950-0003

3/64" Sleeve ONLY 100/pkg

  • Aluminum sleeves only 100 per pack
  • Stops are not available in this size
TRACK-SET-2

2" Tracks Set with Wall Brackets Special Order

  • Custom order to customer's needs
  • Set includes the vertical and horizontal tracks and wall clips for either wood or steel.
  • Must spcify if the door has torsion or extension springs if the tracks are going on a wood jam or steel desired radius and thickness of door
BINS-WHITE

Utility Bin Heavy-Duty Stackable White *** To Extent of Inventory

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
IRB-325

EMX Industries Door and Gate Infrared Thru-Beam Photocells w/ Grey Hoods UL325-2016 EMX-1112-K

  • Type B1 non-contact sensor for use with automatic gates and doors
  • Power: 12V to 24V AC/DC
  • Relay Contacts: 30V 1A
  • Dimensions: 5.03" High x 3.06" Wide x 3.02" Deep
  • Housing: UL and CSA Type 4 4X 3 3R 12 13 Rating
  • Operating Temperature: -40 degrees to 170 degrees
    • .......more details
Installation manualSell sheet
WHITING-SPEC-ORD

Whiting Special Order Parts

  • Special order to customer's specs
MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

  • Used on PRO-GHC
  • 4 required per operator
VWS-34-BROWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Chocolate Brown

  • Pan head
  • S point
VWS-34-DARK-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Dark Oak

  • Pan head
VWS-34-CHRY-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Cherry Oak

  • Pan head
7-19-1

Lock Bar Guide Only

22-01184

Truck Door Three Whole Hinge Utility Style

  • Aluminum Extrusion
  • Cross Reference: Utility #3-4100-0022
V5001-DARK-OAK

Replacement Vinyl Only for 5001-DOD Sold per Foot

PRO-HHD-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet
E/BLOP/127

Automatic Systems Single Channel Loop Detector

  • Works with the BL229 gate op. logic control
26CW94523-CUT

Truck Door Intermediate Panel (13" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
.393-514-L

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
4007-7FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
PRO-PL-20053

Micanan Wall Mount Control Panel Mod. Contactor 20" x 16" x 8" Stainless Steel Panel Nema 4/12

  • Standard features include B2 C2 wiring 24V controls Hinged cover Backplate Primary fuses in panel
5001-12-WHITE

Residential Side & Top Weather-Strip 12' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-9-WHITE

Residential Side & Top Weather-Strip 9' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-7-WHITE

Residential Side & Top Weather-Strip 7' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MK00542

Micanan Emerson Motor Capacitor 1/2HP 110V 324-389uf with Resistor *** No Longer Available

  • For 1/2 Hp 110V operators
MP-00012

Micanan Reverse Limit Switches Mod.

  • For relay logic models
5-30-8A

3" Vertical Track 12-GA 14'-4" (15' door) Sold per Pair

  • Pierced track
GMA-3A-5PKG

Fuse Mini Fast-Acting Glass Fuse 3A 250V 5mm x 20mm

  • 5 per pack
SL-310T

Skylink 1-Btn Visor Mount Transmitter 310 MHz

  • Easy to carry or clip on sun visor.
  • Works in conjunction with Skylink Universal Receiver: Model SL-310R.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
PRO-T-5021-U

Micanan 1/2HP 230V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
178516

Hand Chain Tensioner Universal Bracket Torque Force

  • Floor mount
  • Includes chain keeper with clip #181745
  • For use with all Torque Force chain hoists
Instruction sheet
25-60100

Truck Door Fork Lift Plate

  • Steel Construction
  • Black E-coat finish
  • Allows use of fork lift to open door from truck bay or when loads shift against door
  • Cross Reference: T # 69131 W #1092
  • Dimensions: 18" long x 5.5" tall with 1.5" lip
WEL-200

EMX Wireless Edge Link Transmitter / Receiver Kit (4012-2)

  • Provides a complete wireless solution for interfacing sensing edges with gate and door operators
  • The Wireless Edge Link eliminates the wiring between the safety edge and operator control box
  • No wiring needed reduces installation cost
  • Compatible with NC 10K and pulse monitored outputs
  • Operates two years on two AA lithium batteries
  • Connect up to 4 safety edge transmitters
    • .......more details
Manual
Q092

LiftMaster Rubber Isolator Kit 2 Required Per Operator K75-50150

  • Elite rubber isolator for the HCT (Hercules).
PRO-GHC-10021U-L

Micanan 1 HP 230V 1P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
Installation manualSpecification sheet
37348R

Genie Closed Confirm Remote 915 MHz GLR-BX ** NLA

  • Beeps and flashes green when garage door closes.
  • Gives warning tone and flashes red when garage door does not close properly
  • Compatible with Models 4064 3064 4024 and 3024 only.
  • Works with Genie TriloG™ IntelliG® as well as Revolution Series models PowerMax® SilentMax® and ChainMax™ garage door openers
  • Requires a Genie Network Adapter
  • Sleek and compact design
    • .......more details
Programming instructionsInstructions de programmation
SPRING002

Manaras Brake Spring