Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-PL-INV-200-23

Micanan Wall Mounted Control Panel with Variable Frequency Drive Mod. 2HP 230V 3 PH

Additional charges apply for adding PBS on cover or if panel is not ordered with an operator

2376.187*31.930

Whiting Torsion assembly .187 wire size 31" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

.225_2-5/8"-RH

Torsion Spring .225 x 2-5/8" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 2-5/8"
Length: 12 ft

MGH-6536-M-N1-LH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

PRO-HBH-10023U-L

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

OPH-6114-M-N1-LH

Manaras Opera-H 1 HP 120V 1Ph Monitored Board w/N1 Eyes Left Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

CABLE-NR-14-CC

Cable No Roll 1/4" 19x7 Non-Galvanized C-Coated 500ft

19X7 rotation-resistant wire rope.

HD3080

Step Lift Plate Curled

Step Plate/Lift Handle

LVB636-11

Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

EGRESSKIT001

Manaras Egress Device + Hardware

.283_2"-RH

Torsion Spring .283 x 2" x 12ft RH White

Wire size: .283
Inside diameter: 2"
Length: 12 ft

SPR50B36X114

Sprocket 50B36 1-1/4" shaft 1/4" KW

36 tooth sprocket for #50 chain
Does not have any set screws

1014-1-5/8-10'

Rigid Vinyl Bottom Retainer Notched 10' Long

Black - for door thickness of 1-5/8"

K75-19977

LiftMaster Disconnect Kit Model J SL575

1104-ASFT-10FT

Elton Aluminum Stiffener for 1104 10ft

Prevents the 1104 from buckling in the hot sun

.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

GALV-273-2-144-L

Torsion Spring .273 x 2" x 12ft LH Galvanized Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

.437_6"-LH

Torsion Spring .437 x 6" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 6"
Length: 12 ft

K-73BG770-3311

LiftMaster Service Kit E-Box for BG770

K41-0346-000

LiftMaster Transformer for INSL24UL

Transformer Replacement Kit. Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators

26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

BCSI-PM18

Pivin Drapeau Retaining Ring *** Price by Quote Only

H503L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

Up to 100 000 individual codes
Mounts to wall or gooseneck post
Incl. 6-volt alkaline battery
Illuminated stainless steel faceplate and keypad
Tamper-resistant case and "low battery" indicator
Requires 412HMC receiver

.......more details

Installation Manual Sell Sheet

PRO-GT-7583-U

Micanan 3/4HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

LB1012-12

Laminated Bumper Standard Black 12" x 12" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MB-03204

Micanan Electric Motor Only 1 HP 575V 3PH C-Flange TEFC 56C

Fits GT GH GHC & GSD

26-94623

Truck Door Top Panel (13" x 98") for Whiting DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

PRO-GH-10053U-R

Micanan 1 HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PULL-CHAIN

Pull Chain Spring Only 12" Long

Spring Only for pull chain device
Used with a hand chain for full vertical doors.
Eliminates the need for leaf bumpers

71-EB3PH

LiftMaster Field Install Brake Kit 230/460V 3PH for L5 Operators Ext. Mount

For operators already in the field without a brake

Installation Manual

OPH-6232-M-N1-RH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes Right Hand

Monitored version with Nema 1 photoeyes

PRO-TB-5053-U

Micanan 1/2HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

OGHW-6115-M-N1-LH

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB w/Carwash Mod Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
With Nema 4/12 modification
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection

.......more details

PDC-300-100-1-40/63-20-CH-WP

Pulse 300 Direct Drive Opener with Manual Chain Hoist and Nema 4 1 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

15886

Whiting Top Slide-Double Roller Use with 1264 ** Sold by Quote Only

Special Order item - sold by quote only

MK00157

Micanan Turck Dual Channel Intrinsic Safe Relay

an be field installed

MODKITMIC001A

Manaras Wi-fi Retro-Fit Kit for in-field "M" type operators

M type operators already equipped with monitored photoelctric cells
Includes Manaras Internet Control device MIC001 and ECB BOARD070M with integrated MIc Wi-Fi compatibility software
For operators before June 2022 that don’t have the program M7-04 or M8-04. The board in the operator needs to be changed to have the right program to use the MIC

TDC12X4N4XMC

LiftMaster MAXUM with NEMA4 Trolley DC Comm. Op 3/4HP Equivalent 480V 1PH 60 Cycles/Hr 1200LB **Currently Unavailable

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately DC7AH).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

RJDC7S4N4XL

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 480V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Left-Hand; 3" Output Shaft ** Currently unavailable

Good for Carwash and Barns
Corrosion resistant
High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Optional Battery backup sold separately (DC7AH)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

COVER056

Manaras Control Box Cover GH-MGH

Cover only

BATT54

Battery 12V

Replacement lead-acid battery 12V

RJDC7S1N4XL

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 120/240V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Left-Hand; 3" Output Shaft ** Currently unavailable

Good for Carwash and Barns
Corrosion resistant
High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Optional Battery backup sold separately (DC7AH)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

GALV-TEST-144

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

JHDC22X1N4XMC

LiftMaster MAXUM with NEMA4X Jackshaft 1.5 HP Heavy Duty 120/240V 1PH 100 Cycles/Hour 2200LB ** Currently unavailable

Good for Carwash and Barns
Corrosion resistant
DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada

.......more details

MM00044

Micanan Support U-Bracket Trolley Track Support

LIMIT027

Manaras Micro Switch ST Lever SPDT Honeywell

15A 250VDC

495DEV

Devanco Lead Acid Battery 12V5Ah

Maintenance-Free AGM Technology: No need to add acid or water ever
UL Recognized Component: Certified for safety and performance

Specification Sheet

2376.192.335.110

Whiting Torsion assembly .192 wire size 33.5" spring length 110" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

AJC-F1-F2

Terminal Adapter Converts LM4AH-12 to 485LMC

To convert LM4AH-12 to be used as 485lm

OSHW-6532-M-N1-RH

Manaras Opera-SH with Carwash mod 1/2HP 600V 3Ph Monitored w/ N4 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

MRGHB-6436-M-N1-RH

Manaras 2 HP 480V 3P Jackshaft Monitored w/N1 Eyes with break Right Hand

A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MRGH-6236-M-N1-RH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

PAINT-PEN-SILVER

Garex Touch-Up Paint Pen Silver

27044

Doorlec Electric Motor Explosion Proof TEFC 3/4HP 230/460V 3PH *** Special Order POR

Frame 56 & 56C 1725 RPM TEFC

MGH-6436-M-N1-RH

Manaras 2 HP 480V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

MGH-6435-M-N1-LH

Manaras 1.5 HP 480V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

MGH-6434-M-N1-RH

Manaras 1 HP 480V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

MGH-6114-M-N1-LH

Manaras 1 HP 120V 1P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

MGH-6114-M-N1-RH

Manaras 1 HP 120V 1P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

OGH-6233-M-N1-LH

Manaras 3/4 HP 208V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

PEDALU96

Aluminum Pedestal Post 96"

Pedestal post with hood
High quality aluminum
96 inches tall
Dual face-plate allows for easy wire connections

PDC-300-075-1-30/60-10

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 30:1 10' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

OSHW-6213-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 240V 1Ph Mon ECB w/N4 Photoeyes Right Hand

A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

OPH-6432-M-N1-RH

Manaras Opera-H 1/2HP 480V-3Ph with Monitored Board and N1 Photoeyes Right Hand

Monitored version with Nema 1 photoeyes

OHJ-6113-M-N1-LH

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph Monitored ECB w/N1 Photoeyes Left Hand

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

PDC-300-100-1-40/63-20-CH

Pulse 300 Direct Drive Opener 1 HP 1" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PRO-TBW-7511-U

Micanan 3/4HP 120V 1P Trolley Operator with Brake and Carwash Mod N4 Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

K77-36539

LiftMaster Output Shaft and Sprocket Kit

Compatiable with various LiftMaster® Commercial Swing Gate Operators
Kit includes smooth-barrel cylinder shaft + sprocket #35 limit chain APS sprocket roll pin
Compatible with LiftMaster gate operator models RSW12UL CSW24U

LEDSTRIP003

LED Light Strip (1 Unit) Red/Green/Blue 46" 24VDC

An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option

Installation Manual

41A6102-NOBOX

LiftMaster Power Door Lock Connector with 2 pins No Box

For Jackshaft models

MGH-6537-0M00

WRONG CODE - DELETE

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MT21-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Gray Left Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

26004A.S

Genie Bolt Retainer

The bolt retainer is used with the bolt that secures the pulley bracket to the pulley support

LMEOLRES-10

LiftMaster End of Line Resistor 10K

For use with various LiftMaster® Commercial Fire Door Operators Gate Operators and Extended High Performance Release Devices

RGHW-6214-MON-R

Manaras 1 HP 240V 1Ph Rapido Gear Head Carwash Mod Monitored ECB w/Eyes Right Hand

Rapido version of model OGHW
Includes Monitored Waterproof photocells

15-48B18LGE

LiftMaster Sprocket 48B18 1"x 1/4"

Also known as: 15-9004 1548B18LGE 159004

C-24X12-134-LEX-W

Thermal Window 24" x 12" for 1-3/4" Door Lexan White *** Special Order by Quote Only

For 1-3/4" thick door
Glass type: Polycarbonate (Lexan)

27121-600V

Doorlec Electric Motor 1-1/2 HP 600V 3PH DC223C

1326-112-BLK-PLEXI

Elton Commercial Window 1-1/2" thick 1326 Black Frame Sealed Plexi Glass

Screw together window kit
Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
Cut-out size: 25-1/16" x 12-9/16"
Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
Different glass options and frame colours are available upon request

1-1785

RW Spring Bolt 514 x 2

Housing: Cast iron 5-1/2" H x 2-7/8" W
Bolt: Cast iron bevelled
Keeper: Surface mount
Chain: Zinc plated 36" long with ring Finish: Zinc plated

G-21X13-134-CHRCL

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Charcoal

For 1-3/4" thick door

GHX-383-3/4HP-RH

Doorlec Explosion Proof Gear Head 3/4 HP 208V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

K41-0071-000

LiftMaster HD Power Board Service Kit for HDSL24UL/HDSW24UL

Compatible with the following models: HDSL24UL HDSL24ULMC HDSW24UL HDSW24ULMC

10TD900PB

BEA Wired Transmitter 900mhz Flagged Flag Connectors AAA Battery

Multi-colour LEDs on receiver provide installer with visual notification of signal strength and activation status.
Frequency: 908-918 MHz
Radio Control Type: Digital
Programmable Capacity (standard): 75/unlimited universal
Operating Temperature: -10-55C

7-6134

RW Top Spring Bolt 514 x 3 1-1/4" sq x 9" Long

Bolt: Bevelled steel
Chain: Zinc plated 70" long with ring
Black Enamel finish

5-18-4

Tapered Angle Continuous 2" Heel x 129" L Sold in PAIRS

For 2" track up to 2" thick

RB-TX20

Miller Edge RBand Wireless Edge Transmitter

R4AES

Erone Radium 4-Button AES128 Encrypted Remote

Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes
The code sent by the remote changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Includes AES128 encryption
Compatible with RADIUM AES128 receivers
Range up to 820 ft (250 m)

.......more details

7-6100

RW Hanger 160B2 Sold per Unit

Hanger used on #333 track
For door thichness: 2-1/4" to 3-1/2"

Specification Catalogue

O02R9508

AirLift U Cup

EIM-101

Miller Edge Electronic Interface Module w/Junction Box (JB-02P-W)

Designed for use with pre-UL325-2010 commercial door operators and Miller Edge CPT sensing edges.
It's a durable weather-resistant solution housed in a NEMA 4-rated junction box.
This module is particularly suited for overhead doors using retracting reels or coil cords