Devanco Canada - Get The Right Garage Door Opener‎ and Parts

02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

Die-cast metal enclosure
START may be used as OPEN with all LiftMaster operators.
May be used as OPEN and CLOSE on all operators with type B2 control wiring

5X10PO50

Devanco Loop 5' x 10' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

DD-KIT

Linear Double Delta Radio Kit (2X DT & 1X DR)

Kit includes two DT remotes and one DR receiver
Same as: DNP00006
Operates on 24 VAC power
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

Installation Manual

DS-KIT

Linear Single Delta Radio Kit ** Discontinued

Kit includes one DT transmitter and one DR receiver
Same as: DNP00011
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

.......more details

Installation Manual

25605R

Genie Inner Slide Kit for Chain Drive Models

The innerslide attaches to the chain and connects the carriage to the chain
Works on the following Genie and Overhead Door models:
IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
SP99 – SP SERIES LD100-500-100A-550A LAD125-555
CM6000-6000A-60-70-80-60S
OHD-696 696CD + Others

.......more details

SPREADER002

Chain Tensioner for 1" / 1-1/4"

Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

1005-1-3/4-12

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

WG-305

Devanco White Lithium Grease

Provides long lasting lubrication and protection against rust and corrosion
Ideal for metal to metal applications
Sprays on thick providing a long-lasting protective coating that won't run off

Material Safety Data Sheet Fiche Signalétique

GC-100

Devanco Foaming Glass Cleaner 538g

A powerful foaming glass cleaner goes on thick does not run and wipes off clean
Does not leave streaks or an oily film on the glass
Virtually odorless

Safety data sheet Fiche de données de sécurité

029-98290

W-Style Replacement Door White Stainless Steel Package 029-98290

Replacement door size between 96-1/4" - 98" wide x 72-90" high
Painted white
Stainless steel package

71-90503000

LiftMaster Non-Resettable Counter Field Kit

A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
This corresponds to the number of complete door cycles of use.

Installation Manual

59LMC

LiftMaster Outside Keyswitch ** To Extent of Inventory

12 tumblers provide double locking action
Self cleaning barrel weather-resistant aluminum plate
Cannot be shorted out from exterior with key
One "NO" contact used to activate the door operator
Includes two keys

Installation Manual

MJ7104

Doorlec Utility Switch 21800

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller

M18

LiftMaster Remote Control Tester ** NLA

BK100

Spring Anchor Bracket Mini USA Sold Individually

Adjustable residential center bracket
Bright zinc plated 12 gauge steel
Adjustable bearing plate
For 1-3/4" to 2-5/8" ID springs (Adjustable center line 2-3/8" to 4-1/4")
For use with steel or nylon bearings
Bearings NOT included

.......more details

3AG3

Miniature Fast Acting Glass Fuse 3 Amp 250V (5/pkg) - 766124

6 x 30mm miniature fast acting glass fuse
Rated voltage: 250V
Rated current:3A
ROHS compliant

3AG2

Miniature Fast Acting Glass Fuse 2 Amp 250V (5/pkg) - 766122

6 x 30mm miniature fast acting glass fuse
Rated voltage: 250V
Rated current:2A
ROHS compliant

Z9405

Coupler 1-1/4" Bore Non-Adjustable

Malleable iron for strength
Set screws and jamb nuts installed
1-1/4" Bore with 1/4" keyway
Length: 3.9"

27096A

Genie Drive Gear *** To Extent of Inventory

Gear for Genie Chain Glide PMX Series and PCG Series
3-1/2 inch diameter nylon gear with square center hole
Square center hole is 7/16"

1005-1-3/4-14

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

1005-1-3/4-10

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

36453A.S

Genie Traveler for Chain and Belt Drive Models ** To Extent of Inventory

Replacement carriage for models: 1022/24/26 2022/24/26 and 2200
Comes with a pull cord for manual release.

WKP250LM3

LiftMaster Wireless Keypad 250-Code ** Replaced by KPW250

Wireless access control keypad
250 code capacity - 4-digit codes
Wireless control of up to 4 doors or gates with additional GCUs
Post or surface mount standard
900MHz
Compatible with GCU and LiftMaster® 315MHz rolling code receivers

.......more details

Programming Instructions

PRO-GH-VFD

Micanan Variable Speed 1 HP 208/230V 3 Phase Operator

Variable Frequency Drive Operator
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

19-50ML-NP

Master Link #50 Nickel Plated

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

For 2-wire edges
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

K75-12858

LiftMaster Clutch Kit for SL595

Kit includes: Clutch Pressure plate Torque Limiter Sprocket Assembly Bell Washer Nut Hex Jam Clutch Disc and Keyway

Replacement Instructions

K75-18618

LiftMaster Disconnect Kit for Grey SL595

Kit includes: Disconnect support bracket Detent plate Disconnect lever Release yoke Bevel and Disconnect shaft
Works with SL590 and SL595 Gate operators that are painted Grey

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

For use with 2" rollers
Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
Same as part number 263

29-NP712

Lead Acid Battery 12V 7A

BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

Zinc plated
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

OMNI-EXB

LiftMaster Relay Module

Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

Same as part number K75-50097

Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

Compatible with Allstar and MVP receivers
4-digit access code
Backlit keys
Operate LED
Power: 9-volt battery
Codes: 19683

.......more details

Programming Instructions

T-833-C-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025-311 MHz****NLA

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

Same as MK-01179

41C3196

LiftMaster Antenna for Co-Axial Receiver

Wire antenna kit same as what is supplied in a 312 / 412 HMC

1013-1-1/4-24'

Rigid Vinyl Bottom Retainer L-Shaped 24' Long

For door thickness: 1-1/4"

1013-1-1/4-16'

Rigid Vinyl Bottom Retainer L-Shaped 16' Long

For door thickness: 1-1/4"

1013-1-1/4-14'

Rigid Vinyl Bottom Retainer L-Shaped 14' Long

For door thickness: 1-1/4"

Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

Pusher spring 27" long with a large 3" tip. Sold as a pair
11lbs of initial pushing strength per spring+ 3lbs per inch per spring

02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

Code on key is #301

BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

With C16-32F bearing
Galvanized steel
3-3/8" shaft offset
Flange allows plate to be bolted to the wall for additional support
Same as part number 209

7FT-RAIL-SCREW

LiftMaster 7' screw drive rail 3077SD

One piece rail

K29-32410

LiftMaster Alarm Kit for SL575/585/595

Kit includes Alarm Spacer and Faston

Installation Manual

GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

Auto voltage sensing - no jumpers to set
Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 128 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

Activates one Delta-3 receiver for remote stop or reverse safety edge
No cables or coiled wires
Mounting screws (4) supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
The 300 MHz frequency is compatible with standard Multi-Code transmitters
The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
Operates on 12-24 volts AC or DC power
Two channels
Whip antenna

.......more details

Programming Instructions

CPS-3

LiftMaster Option Card with CPS-L Eyes

For applications requiring two sets of photoeyes ( CPS-III)

Installation Manual

MDR-2

Linear 2-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates two devices
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

Makes any garage door operator compatible with MegaCode transmitters
Simple plug-in design
Easy to install - one connection using two-conductor wire
Memory: storage for up to 10 MegaCode transmitters
Normally open contact activates for 0.5 seconds
Power: 110 VAC +/- 10% 60 Hz

.......more details

MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

The MGT is the industry’s only fully supervised gate safety edge transmitter.
It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
Features Include:
Signals access controller for stop or reverse when safety edge activates
No cables or coiled wires

.......more details

Programming Instructions

ACT-31B

Linear 1-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz (ACP00879)

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
Features Include:
Internal antenna
1-6 digit PIN for each user

.......more details

Installation Manual

K74-G0589

LiftMaster Hall Effect Sensor

For SL595 gate operator

K75-18364

LiftMaster Arm Assembly Kit for SW470

Complete arm kit for SW470 gate operator

V300-TS

Top Seal Weather Strip 100 ft per Roll

For use with bottom retainers installed on top of door.
Vinyl: Black

AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instructions Manual Sell Sheet

15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

15-50B40LGH

Sprocket 40 Teeth 1" Bore 1/4" Keyway

15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

15-50B18LGH

Sprocket 18 Teeth 1" Bore 1/4" Keyway

12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

Actual length: 179" (14' 11")

1086090001.S

Overhead Drive Gear for Overhead 556

White plastic gear only for Overhead model 556

41A7619-4

LiftMaster Cover for 8557

10FT-TROLLEY-SET

LiftMaster 10' Track Set for Trolley Operator 10-5810-P (2 pcs) *Actual length 155"*

Actual Length 12' 11"
Includes 2 pieces of 10-5810-P

SHAFT034

Manaras Clutch (Input) Shaft for MJH

41A7756

LiftMaster End Panel with Light Socket for 8557

STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

Rapid learn feature programs multiple transmitters in just seconds
Ideal for gated communities parking lotsand garages.
Works on a tri-band frequency

Programming Instructions Sell sheet

50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

3- wire 18-gauge
Also called Reel Cord

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

PRO-W_MOD

Micanan Nema 4/12 Modification

This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.

PRO-TB-5011-R

Micanan 1/2HP 115V 1P Trolley Operator with Brake - Contactor

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models

RS1029

Roller 2" Steel 9" stem- WL 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 9.5" Overall Length: 10.5"
Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)

306839

Bircher Hercules 2s Microwave Motion Sensor for Industrial Doors

Two completely independent programmable outputs for endless application scenarios
Highly flexible program settings utilizing both outputs are now easier to program
23' (7 m) long cable for maximum installation flexibility
6-wire cable using traditional wire colors & thicker wire gauge for easier installation
Pulse on exit feature
Differentiation between pedestrian and vehicle traffic

.......more details

Installation Manual Sell Sheet Field Size

VBELTB29

Manaras VBelt 5L 29" Type B (5L320)

For models OPJ OHJ OPH & OSH
Same as 5L320

029C98090

T-Style Complete Replacement Door White Stainless Steel Pkg 029C98090

Manufactured to exact size fully assembled tracking and spring assembly included.
Price varies according to size

821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

Enables smartphone control of most major brands of garage door opener with photoeyes.
Includes Wi-Fi hub and door sensor

Installation Manual Manuel d'Installation Sell Sheet Brochure

195LM

LiftMaster Ceiling Mount ***Discontinued***

Designed to fit most standard garages
Black powder-coated finish hides wires and cords for a cleaner look
Mounts parallel or perpendicular to rail
Adjustable height to fit most ceilings
Hangs 6.5 to 24 inches down from ceiling

Installation Manual Manuel d'Installation Sell Sheet Brochure

95LMC

LiftMaster Keyless Entry Transformer

2-wire hook up
110VAC Input 22 VDC 2-Wire Connection

41A7114-7

LiftMaster Travel Module (41D8071-4)

For model: 8550W & 8160
Same as 41D8071-4

Installation Manual Manuel d'Installation

41D1739-1

LiftMaster Motor & Travel Module (041-0236-000)

For model: 8550
Also known as: 41D8006-1 41D1739-1 41D1624-1 041D1624-1 41-0236-000

41B7611

LiftMaster Filter Board w/Screws **to extent of inventory

For model: 8550

85LMC

LiftMaster Plug-In Power Supply

Plug-in jack for easy installation on Liftmaster receivers
Power input level: 105-135AC 24AC output

41A7635

LiftMaster Transformer 100V

For model: 8550

1A3982

LiftMaster Operator Splash-Proof Cover

For models: MH H HCT GH
For wall mounted operators 31" L x 19" W x 18" D assembly required.

Installation manual

RESET003

Manaras Resettable Overload Fuse 6A 1 Phase

MU00001

Micanan Swivel Pulley

For models PRO-H / HB

MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

Pro-H requires 3 of these bearings

AC7

Felco C7 Cable Cutter 3/16" Capacity

Tool length: 8"
Gives a clean cut without crushing thanks to the triangular cutting system.
Blades and centre bolt in high-quality hardened steel for exceptional performance.
Thumb catch designed for one-handed operation.
Pressed steel handles with non-slip grips
Maximum cutting diameter: 7mm / 0.28in

.......more details

Data sheet

41C0279

LiftMaster Light Socket for Sec+ 2.0

New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
Compatible with LiftMaster garage door openers manufactured from 1993 to present.
New "insulated" design eliminates interference from CFL bulbs therefore better remote control range