Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Q003

LiftMaster Chain Tensioner Bolt w/2 nuts K07-50637

This replacement kit is most commonly used to tighten the attached chain on the sliding gate

.192-2-LH-C

Torsion Spring 192 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .192 ID: 2" Length: 12 ft

029-98290-PRIMR

W-Style Replacement Door Primer Only Stainless Steel Package 029-98290

Replacement door size between 96-1/4" - 98" wide x 72-90" high
Primer only
Stainless steel package

18-RWB-PAIR

Winding Bars Round 18" Set of 2

Cold rolled hardened steel.
Machined to 7/16" at one end with 1/2" outside dia. on the other.
Sold as a pair.

RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

CB18A0500

Cable 1/8" 7x7 500' Galvanized

Galvanized cable 1/8" 7x7 500ft spool.

Comparison charts

MV-00354

Micanan Control Station 3-Btn O/C/S N4 Surface Mount c/w Key Lock-out & Red Pilot Light 24V

MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

Activates two 318MHz MegaCode receivers independently
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery incl.
Codes: 1000000+ (MegaCode format)
Dimensions: 2.16" W x 3.75" H x .95" D

.......more details

Programming Instructions

EHJW-311-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 120V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

PRO-APTB-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

For 2" thick doors.

Q080

LiftMaster Dolly Latch Kit K75-50138

For Liftmaster trolley operator HCT

31D380

LiftMaster Sprocket Cover

Sprocket Cover Replacement Kit for use with various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers

38123A

Genie Powerhead Mounting Flange

Mounting bracket connects the powerhead to the rail assembly.
A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
Fits TriloG PowerLift GPower and PowerMax Operators

.225_1-3/4"-RH

Torsion Spring .225 x 1-3/4" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 1-3/4"
Length: 12 ft

42-31247

LiftMaster Terminal Block 20A 600V

3-position

MU22-2WIRE-LH-Y

Miller Edge MU22 2-Wire Left Hand Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

MK-00063

Micanan Honeywell Limit Switch

SSZP19-1

Solid Shaft 1" Keyed Zinc Plated 19'-1"

25-01575

Truck Door Beverage Body Roll-Up Door Cable

Includes one (1) pair of cables
Zinc plated tear drop
Length: 110 inches
Cable eye: 1/4
Cable construction: 7 x 7 galvanized

T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
2-buttons provides control for 2 Lynx operators
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Will work with Lynx residential operators built from 2000 and up.

.......more details

Compatibility chart

PRO-GT-10083-U

Micanan 1HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

Increases one number each time current is applied
Connects to the 24 volts of contactor coil
Simple 2-wire connection
Same as 50-12862

.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

1104-16FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 16' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

MT22-BLACK-U

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Universal Outlet

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MK00594

Micanan Auxiliary Contact Block 100FA40

.306-514-R-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

MCB-421-CONT

Lynx Heavy-Duty Chain Drive Trolley 3/4 HP 220V 1P Contactor Model

Heavy-Duty spur gear chain drive trolley

WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

.306-514-L-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

BK309

Jamb bracket J-09 #9 12 gauge

Sold by the piece
Height 4.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

CBC18

Thimble 1/8" - 100 per pkg

SPR50B54X11238

Sprocket 50B54 for a 1-1/2" Shaft 3/8" keyway

SPR50B14X1

Sprocket 50B14 for a 1" Shaft 1/4" keyway

2236.096

Whiting Coldsaver Intermediate Panel 12-1/2" x 96"

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

PRO-J-5043-U-LH

Micanan 1/2HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-GHCB-30053

Micanan 3 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manual Specification sheet

TS-1-255-GALV-KEY

Tube Shaft 1" x 255 (21'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

1006-1-1/2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

PRO-T-7581-U

Micanan 3/4HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

E/BLOP/149

Automatic Systems Safety Edge for BL229 13'

25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

Double - Loop
25" long 42" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

SPECPARTEL001

Manaras 3-btn Push-Button Control Station with Pilot Light Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.

2510-430

Linear Box Power Assemly SW/SL 230V Apex

The 2510-430 is a replacement Linear 208/230V Power Box Assembly
Input Voltage: 220/230/240 AC (60 Hz 1 Phase)

1006-1-3/4-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

MJ5011U

LiftMaster Medium-Duty Jackshaft Op 1/2HP 115V

The MJ door operator is designed for use on vertical lift sectional doors or small rolling doors and grilles.
Maximum recommended duty cycle: 12 cycles per hour
Floor level disconnect
Adjustable friction clutch
Heavy-duty solenoid actuated brake
Easily field converted for right or left mounting

.......more details

Installation manual Sell sheet

26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

Secondary Arm Only for LA400
All new arms are backwards compatible with the previous model but the LiftMaster branding is different

Installation Manual Manuel d'Installation Sell Sheet

.312-514-R-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

OGH-6432-ECB

Manaras 1/2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

MQ00012

Micanan Adjustable Cable Stopper Gold C/W Set Screw Sold per piece

Used on all Micanan waterproof and corrosion proof units that have brakes as well as all explosion proof units.
Comes with set screw 3/16” x ¼”

2G-LEFT

Rolling Steel 2" Curved Stamped Endlock Left Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlock

26-40026

Truck Door U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** DISCONTINUED

Aluminum extrusion construction
Cross Reference: W #1801

PRO-APTB-7583-U

Micanan 3/4HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

18004B

Genie Motor Start Capacitor 220VAC 50-60 MFD

Compatible with most 1/3 HP Genie & Overhead operators

41A5434-14

LiftMaster Full Belt Assembly for 10ft Door

For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D

7001-WG-10-MO

Residential Wood Grain Side & Top W/S Medium Oak 10' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

OPH-6232-ECB

Manaras Opera-H 1/2HP 208V 3Ph with Electronic Circuit Board

Installation Manual Sell Sheet

ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

PRO-GT-15021-U

Micanan 1-1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

802

Fasteners Sleeve Anchor 3/8" x 1-7/8" 100/Box

Secure anchoring into concrete brick or block

MV-00297

Micanan Commercial Wireless Keyless Entry 372 MHz

Will work on Micanan commercial operators that have an on-board receiver
If there is no receiver then MK-00648 is required
Same as MV-00086

Programming instructions Instructions de programmation

K72-13059

LiftMaster Output Shaft Kit APT

Kit contains: Shaft Bearings Roll Pins Washers and Sprockets (41B10 x 3/4" & 41B16 x 3/4")

7140251

FAAC Hydraulic Oil HP2 1 Litre *** To extent of Inventory

9150000624

1/4" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

PRO-HB-7511R-LH

Micanan 3/4HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Includes solenoid brake
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

8FT-TROLLEY-SET

LiftMaster 8ft Double Angle Rail Set for Comm. Trolley Ops 19-5808-P (2pcs) *Actual length 131"*

Double Angle Rails for doors up to 8' 6" high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us

25-10001

Truck Door End Hinge for Todco Roll-Up Doors

Zinc plated steel construction
Four-knuckled to ensure smooth door operation
Cross Reference: T #69035 W #4007 220000

JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

Jack Shaft Mounting plastic guide 4.5:1 reduction
Gear drive
Fits 3-3/8" minimum offset
Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
1 chain keeper
2 shaft collars

.......more details

Sell sheet

MK00552

Micanan Capacitor for 233-284 MFD with Resistor ** Replaced by MK00542

MT22-BLACK-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

7-6095

RW Hanger 323 For use with #31 track

Wheels: 2-1/8" diameter Formed Steel
Apron: Formed steel vertically adjustable 5-3/4" long x 3-1/2" wide
Pendant: 1/2" diameter Steel
Door thickness: 1-3/4" inches to 2-1/2" inches
Included: 1 carriage bolt 2 flat head stove bolts
Capacity: 1 pair for a maximum of 400 lbs

.......more details

JANUS-M650

Janus Non-Insulated Mini Storage Door Roll-Up Spec Order

650 Series mini storage roll-up door
The 26 gauge corrugated door curtain is manufactured from full hard galvanized grade 80 steel and coated with Super Durable polyester paint
Available in sizes up to 10’0” x 10’0” and in over 20 different colors
During production each spring is coated with a generous amount of grease that penetrates the innermost pores of the spring with additives displacing moisture and preventing the formation of rust and corrosion
Enclosed in a tube for lifetime protection
Special Order item

.......more details

WHITING-SPEC-ORD

Whiting Special Order Parts

Special order to customer's specs

MK00785-RATED

Explosion Proof Killark Labeled 3-Btn Pushbutton Control Station

CSA and UL labeled station
Three button O/C/S Nema-7/9
Surface mount

OPH-6114-ECB

Manaras Opera-H 1 HP 120V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

SPAMG095A000

NICE Upper Cover Kit MBAR5

1005-2-8'

Aluminum Bottom Retainer U-Shaped 8' Long**Actual Length 8'1"**

For door thickness 2"

SCRUBS-PAIL

Scrubs Hand Cleaning Towels 72 Towels per Pail*** Special Order Sold by Quote Only

The citrus-based formula and textured towel combination works to loosen dissolve and absorb the toughest materials
Each pail contains 72 towles
6 pails per case

CP-LX700

Lynx 1-btn Transmitter 372 MHz for Commercial Op with UL325 Board

Works on the UL325 commercial operators
Not compatible with the 372HMz residential operators
Works with on-board receiver on Lynx UL325 operators
Currently no external receiver compatible with this transmitter

Programming instructions Instructions de programmation Compatibility chart

65-7WIRE-L

LiftMaster 7 Conductor Control Wire 500ft

20 AWG
Ideal for wiring CPS-RPEN4 photocells

2598

Aluminum 5/16" Cable Eyelet

For use on Whiting dry freight and refer doors
Use with 1/8" stainless or galvanized cable

CLUTCHPLATE004

Manaras Clutch Plate 5/8 Trolley

Q404

LiftMaster Omni Siren K29-50279 **to extent of inventory

25-01434

Truck Door Stainless Cables 110" 1/4 nylon eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Nylon eye ends are used 1/4" and 7/16" eye cables
Cross Ref: W4020-1

.295-134-R

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

SOLID_SHAFT_14'

Solid Shaft 1" Keyed 14 ft Galvanized

Actual length is approx. 14'-1"

K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.