Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
PRO-HBH-10023U-R

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
LVB620-11

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
MOUNTSHAFT016A

Manaras Clutch & Hoist Shaft Kit for Opera-SH Nema 4/12 (OSHW)

  • Input / clutch shaft kit for Manaras Opera-SH N4/12
CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

  • Lead probe ONLY. Requires the CS303-C-1 detector.
  • Easy installation above or below ground
  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Sensitivity display
  • Single cut installation with flat pack model
ME123-M-YEL-U

Miller Edge Yellow Universal 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
19-5116

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door

  • For 3/4 & 1 HP trolley operators
OSH-6533-ECB-LH

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation manualSell sheet
K74-33015

LiftMaster Electrical Box Replacement Kit L3 **to extent of inventory

  • For models T GT and GH L3
17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

  • Same as G172701
MGS20-B-2U-05

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 5ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
CABLE_316SS5000

Cable 3/16" 7x19 5000' Stainless Steel ** Price on request

Comparison charts
PRO-HBH-7523U-R

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
TC3-411

Lynx Commercial Trolley Op. 3/4HP 120V for 14' High Door with Brake Contactor

Sell Sheet
CP-BRG-1

Lynx Bearing 1" *** Replaced by HW-BRG-1

  • 2 in total on a MCJH
MK-00511

Micanan Resistor 330 OHM 5Wc/w Leads (For Motor)

SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1-1/4" solid shaft
  • 3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.
    • .......more details
RA-AD-WKP-05

Lynx 5-btn Wireless Keypad AD455 372 MHz

Programming InstructionsCompatibility chart
PRO-GH-10011-U

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
MO00003

Micanan Compression Spring for PRO-H/HB

  • 0.80 ID x 0.092G x 1.80 Long
EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

  • The DC motor offers additional benefits with very quiet operation and much less vibration.
  • It is ideal for garage doors that are below a living room or bedroom.
  • The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
  • Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
  • Available in either Belt or Chain drive
  • Includes two 2-btn keychain remotes # MK318-2
    • .......more details
Installation ManualSell Sheet
1003-4"-PER-FT

Bottom U-Rubber 4" Black Sold per Foot

.250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
1007-1-5/8-10

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 10'1"

  • For door thickness of 1-5/8" to 1-3/4"
7001-WG-10-CO

Residential Wood Grain Side & Top W/S Cherry Oak 10' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
OPH-6112-ECB-LH

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
EL2000SS

LiftMaster Telephone Entry Access Control System Stainless Steel ***NLA

  • A high-capacity telephone entry access control system designed to complement virtually any gated community.
  • It is flexible enough to be used in apartment buildings condo complexes office parks and commercial sites.
  • features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line making it a great choice for multi-tenant installations
  • Entry Codes allow for 2000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes 1000 card codes 500 entry codes for example •Transaction Monitoring stores a maximum of 8000 transactions including date time identification and transaction type.
  • Activity Reporting gives property managers the ability to print database system and history reports.
  • Call Forwarding and Do Not Disturb schedules can be programmed for every resident.
    • .......more details
Installation ManualProgramming InstructionsInstructions de programmationSell Sheet
BP-BE102BP

Contact Block Base Mount NC Contact

  • For use with RC P enclosures. IP65
26CW94522

Truck Door Intermediate Panel (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
UNI-100-102

Uni-Size Bottom Weather Seal 10'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
K23-19380-2

LiftMaster Reset Switch Kit for Miracle-One

  • Reset switch and Harness
5001-7-CHARCOAL

Residential Side & Top Weather-Strip 7' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
1104-ASFT-10FT

Elton Aluminum Stiffener for 1104 10ft

  • Prevents the 1104 from buckling in the hot sun
25-2015

LiftMaster 15 Amp Overload Fuse

  • For models: SL585-100-11 SL595-100-11 SL575-100-11
39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

MD-00057

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
50800P

LiftMaster Treadle Protection Plate **discontinued

2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
GH4416-03-L

Green Hinge #3 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
K75-51048

LiftMaster Cover with Crank Housing for SL3000 **DISCONTINUED

  • HD polyethylene cover
27-48-320

Extension Spring 8' Door - 320 lbs Green

  • Single - Loop
  • 27" long 48" stretch 320 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-130

Extension Spring 8' Door - 130 lbs Yellow

  • Single - Loop
  • 27" long 48" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G07-SS

Hinge #7 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K77-36541

LiftMaster Antenna

  • For various gate operators
ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualSell Sheet
MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

  • For 1/3 HP and 1/2 HP operators only
MP00020

Micanan Up-Charge Track and #41 chain for 20' h Door *Actual length 270"*

  • For 3/4 HP and 1 HP operators only
K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

  • Replacement arm only - no stripes old style
271723

Rolling Steel Slide Bolts for Bottom Bar D679

H031

Rolling Steel Slide Bolts and Holder Fire Door

66003102

Rolling Steel Universal 1/2 Slat Sold per Foot

4JW-RIGHT

Rolling Steel 3" Curved Cast Windlock 273004 RH

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
2528.110

Whiting Dual-Spring Shaft 110" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • No pre-drilled holes
  • Cross Reference: For Whiting # 2376 balancer
7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

  • A Whiting original
V7001-WHITE

Replacement Vinyl Only for 7001-White 200ft Roll

  • Sold in 200 ft rolls only
340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer to specify exact length
12-10715

LiftMaster Flanged Bearing 1" Keyed

342.115-CUT

Whiting Intermediate Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer must specify exact length required
.375-6-RH-C

Torsion Spring .375 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .375 ID: 6" Length: 12 ft
.363-6-RH-C

Torsion Spring .363 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 6" Length: 12 ft
.331-5-1/4-RH-C

Torsion Spring .331 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 5-1/4" Length: 12 ft
.331-2-5/8-RH-C

Torsion Spring .331 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 2-5/8" Length: 12 ft
.331-2-5/8-LH-C

Torsion Spring .331 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 2-5/8" Length: 12 ft
.312-6-LH-C

Torsion Spring .312 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 6" Length: 12 ft
.312-5-1/4-RH-C

Torsion Spring .312 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 5-1/4" Length: 12 ft
.295-5-1/4-LH-C

Torsion Spring .295 x 5-1/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 5-1/4" Length: 12 ft
.283-2-LH-C

Torsion Spring .283 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 2" Length: 12 ft
.262-2-LH-C

Torsion Spring .262 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 2" Length: 12 ft
.262-1-3/4-LH-C

Torsion Spring .262 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 1-3/4" Length: 12 ft
.250-2-RH-C

Torsion Spring .250 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .250 ID: 2" Length: 12 ft
.243-2-RH-C

Torsion Spring .243 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .243 ID: 2" Length: 12 ft
.234-1-3/4-LH-C

Torsion Spring .234 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 1-3/4" Length: 12 ft
.234-2-LH-C

Torsion Spring .234 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2" Length: 12 ft
.225-2-5/8-RH-C

Torsion Spring .225 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2-5/8" Length: 12 ft
.225-1-3/4-LH-C

Torsion Spring .225 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 1-3/4" Length: 12 ft
.218-2-RH-C

Torsion Spring .218 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .218 ID: 2" Length: 12 ft
.218-2-LH-C

Torsion Spring .218 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .218 ID: 2" Length: 12 ft
DF090.2

Whiting Dry Freight Door 3/4" without Track or Balancer

  • Original Whiting dry freight replacement door for serial # 99164
Q310

LiftMaster Surge Protection for MIR-1 ( K74-50271) ** DISCONTINUED

  • For the Miracle-One single arm gate operator
  • Same as part no. K74-50271
K1D6597-1CC

LiftMaster Control Board with Heat Sink CSL24V & CSL24VH

  • Control board for CSL24V and CSL24VH gate operators
  • 014D1058M
.187-2-L

Cut-to-Length Torsion Spring .187 x 2" Left Hand Wound

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
SPR41B12X1

Sprocket 41B12 1" Shaft 1/4" keyway 2SS 5/16"

OGH-6115-ECB

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6214-ECB

Manaras 1 HP 240V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6433-ECB

Manaras 3/4 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
201-300-301-01

Equinoxe Long Range Transmitter O/C/S for 1-Door 433 MHz New Generation

  • Open/Close/Stop remote for 1 door
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Year 2016 + (red sticker under batteries)
Programming InstructionsInstructions de programmation
OTBH-6534-1-ECB

Manaras Trolley Operator 1 HP 600V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6233-1-ECB

Manaras Trolley Operator 3/4 HP 208V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6232-ECB

Manaras Trolley Operator 1/2 HP 208V 3 Ph with Electronic Circuit Board

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
OHJ-6214-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 240V 1 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OHJ-6233-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OHJ-6232-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 208V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OPH-6433-ECB

Manaras Opera-H 3/4HP 480V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPJ-6534-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 600V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
OPJ-6234-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 208V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
OPJ-6213-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 240V 1 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
T105L5

LiftMaster 1 HP 575V 3p Commercial Trolley Operator Logic 5

  • Low profile trolley operator with brake included
Installation ManualManuel d'InstallationSell sheetBrochure
OPJ-6532-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 600V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet