Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
42GRR-9002

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

  • nput: 70-264VDC/AC
GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

  • Compatible with various LiftMaster® Swing Gate Perimeter Access Systems
LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

  • Laser-based sensor system for automatic swing doors.
  • Time-of-flight technology used to eliminate the limitations of infrared-based devices.
  • Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
  • Provides asjustable pattern depth.
  • Min/max door width: 20"-48" from leading edge of sensor LED
  • Mounting height: 75"-98" from finished floor to sensor LED
    • .......more details
GALV-283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

  • Maxum J-1200
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
2376.156.17.730

Whiting Torsion assembly .156 wire size 17" spring length 73" shaft

2806.206.380

Whiting .206 x 2-3/16 x 38" Roadside with Cones

K41-0254-000

LiftMaster Electric Motor IHSL24UL

  • Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
  • Compatible with the following models: IHSL24UL IHSL24ULMC
GALV-225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
DWI-LOCK

Doorway Impact Monitored Slide Slock V2

  • Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
  • Connects to an Air/Impact switch to mechanically and electrically lock the door.
3B4X-SS

Control Station Exterior Stainless Steel Enclosure Surface Mount O/C/S N4X

  • OPEN-CLOSE-STOP Push Button
  • Stainless Steel Enclosure
  • Buttons aligned vertically
  • Dimensions: H=6-3/4"†W=3-1/2"†D=3-1/2"â€
BEA-10BODYGUARD-T

BEA Automatic Overhead Pedestrian Swing Door Sensor

  • Designed to provide threshold protection during the open state
  • Prevents a closed door from opening and an open door from closing when a person is in the detection zone.
  • Adjustments can be made with the BEA remote.
  • Installation height: 9' max (6'6" to 8' recommended)
  • Operating temperature: -22 F to 140F
  • Immune to electrical and radio frequency interference
    • .......more details
Installation Manual Manuel d-Installation
K80-5001

LiftMaster Keyway 3/16 x 3/16 x 1-3/4"

  • For use with various LiftMaster® Gate Operators and Perimeter Access Solutions
10BOX45RNDSM

4.5" Round Surface Mount Box

  • 4.5 inch round surface-mount box for 4.5 inch round push plates.
10PBR45LL

Push Plate S/S 4.5" Round Large Logo

  • Compatible with 900 433 and 300mhz.
  • May be hardwired to the operator or connected to BEA transmitters.
LPEXP

LiftMaster CAPXL Loop Detector Input Board

  • Automatically trigger a phone call to a guard or office when a guest arrives
  • Mounts inside of CAPXL
  • Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
  • Operating Temperature -20°F to 130°F (-29°C to 54°C)
  • Dimensions: 2.8†x 2.3â€
GHW-383-1HP-RH

Doorlec Industrial Gear Head Door Operator 1 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
    • .......more details
K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

  • For use with various LiftMaster® Commercial Door Operator Models
K77-38121

LiftMaster Wiring Harness SL585U SL595U

  • Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators
15-50B22QGH

Sprocket 22 Teeth 1-1/4" Bore 1/4" Keyway w/SS

2376.156.19.780

Whiting Torsion assembly .156 wire size 19" spring length 78" shaft

2704.177_13.5

Whiting Roadside Torsion Spring 2-3/16" ID 13-1/2" Long

  • Torsion spring wire only
  • .177 wire size
GALV-295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
TDC7-10

Liftmaster Comm. 10FT Trolley Angle set (10-5810-P x 2) and #48 chain pack (TDC48-10) ***Actual length 155"***

  • Double Angle Rails for doors up to 10'6" high
  • Includes #48 chain pack
CHAINTENSDC

LiftMaster Chain Tensioner 1" MAXUM DC

  • For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
  • Spreader for Maxum operators and 1" door shaft
400-CBAC-STD-115V

FAAC Standard Gate Arm w/Positive Stops 40-1/2" L *** Price by Quote Only

  • 400 CBAC Standard (Short) Arm with positive stops 40-1/2" tip-to-tip
  • Replacement arm for hydraulic Swing Gate Operator 10420112.5
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
  • Dimensions: 40.5 x 3.35 x 3.35
400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

  • 400 CBAC EG Long Arm with positive stops
  • For hydraulic Swing Gate Operator
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
LDJ-CAP-48MFD

Doorlec Run Capacitor for LDJ RCR50-370

  • 370VAC/B 50 uf 50/60 Hz
  • CSC run capacitor
041C0010

LiftMaster Chain Spreader 3/4hp

  • For use with various LiftMaster® and Chamberlain® 3/4 HP Chain Drive Garage Door Openers
041D0190

LiftMaster Power Cord RJO

  • Replacement 6' AC Power Cord
  • For use with various LiftMaster® and Chamberlain® RJO Series Wall Mounted Garage Door Openers and Light Duty Commercial Door Operators
CGH205L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GALV-331-258-144-L

Torsion Spring .331 x 2-5/8" x 12ft LH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-306-334-144-R

Torsion Spring .306 x 3-3/4" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-2-144-L

Torsion Spring .250 x 2" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
11.6135

Whiting Horizontal Track 2" x 135" L 6" Radius Curbside 1 Piece

  • 1 curbside horizontal track
EMX-1916-1

EMX Single Gold Hood For IRB-MON2/4X2 1 Piece Only

  • Gold coloured metal hood (1 hood)
Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

  • For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators
2376.162.18.960

Whiting Torsion assembly .162 wire size 18" spring length 96" shaft

S6TL2641E15

Erone 18-Channel Handheld Transmitter 433MHz

Wireless System Chart
BEA-10PS12-24

BEA Power Supply UL/ULC Listed

MOTOR271-WIRED

Manaras Electric Motor1/2HP 208/460V 3PH

  • This item is compatible with BRAKE011
0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

  • Prox.padâ„¢ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
  • The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
  • The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
  • The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
  • By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
  • The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.
    • .......more details
15-50B16LGH

Sprocket 16 Teeth 1" Bore 1/4" Keyway w/SS

K77-50336

LiftMaster Washer and Nut Only for Traveler Carriage Q232

  • Compatible with various LiftMaster® Swing Gate Operators
2200-886

Linear Sprocket 50B20 1" Bore

BEA-35-1555

BEA 50' of Cable Only for LZR Widescan

  • Optional 50 ft cable for use with the LZR-WIDESCAN
2100-1622

Linear Jam Nut 1"-14W 5/16 Tap Hole

2300-390

Linear Friction Disc 5.5 x 2.06 x .18 pair

2200-274

Linear Pillow Block Bearing 1"

EHJX-353-1

Doorlec Industrial Jackshaft Op. Explosion Proof 1 HP 575V-3Ph ** Price on Request

  • Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse.
  • Solenoid Brake prevents coasting and secures the door when closed
  • Explosion-proof (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
XBA3HF

NICE L/MBAR Control Logic Board Hi Frequency (SPXA3HF)

  • Exactly the same board as XBA3/U just rated for higher cycle per hour because it has a built in fan on it.
GH755L5-LH

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GHW-311-1.5HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1-1/2 HP 115V 1P with ECB

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

K20-3100M-5-H25

LiftMaster Electric Motor 1 HP 575V 3P L5

  • For use with various LiftMaster® Logic 5.0 Commercial Door Operators and Slide Gate Operators.
  • Also known as: 20-3100M-5 K20-3100M-5
2376.162.18.920

Whiting Torsion assembly .162 wire size 18" spring length 92" shaft

MD-00025

Sprocket 410B23 x 1" 1/4" KW 2 SS

SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
2376.187*29.900

Whiting Torsion assembly .187 wire size 29" spring length 90" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
2100-765

Linear Shaft Pulley HSLG

GALV-375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
15265

Whiting Rear Frame Conversion - 7" Header 2.5" Posts

  • An add-on option only. Price by Quote
K72-34845

LiftMaster Clutch Shaft Kit SL575GL

GALV-273-258-144-L

Torsion Spring .273 x 2-5/8" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-6-L

Cut-to-Length Torsion Spring .363 x 6" Left Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-363-334-R

Cut-to-Length Torsion Spring .363 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
DC-ADAPT125-100

Dyna-Hoist DC Series Adaptor 1-1/4" to 1"

OPH-6114-M-N1-RH

Manaras Opera-H 1 HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
2376.200.30.870

Whiting Torsion assembly .200 wire size 30" spring length 87" shaft

MGR20-B-2U-M-P/FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Monitored Sold Per Foot

  • €¢Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty •Monitored edge - pls specify the operator edge is connecting to •Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)
C-514-114-INSTALLED

Cones 5-1/4" 1-1/4" bore Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF514U-114
41832R.S

Genie Service Head 6070H/B 6170H/B

  • FOR REPLACEMENT OF JACKSHAFT OPERATOR SHAFT RELEASE OR MOTOR ASSEMBLIES
  • Head Service Kit for 6070H/6070HB and 6170H/6170HB
  • Special Order Price by Quote Only
  • This kit includes the complete motor but does not include the circuit boards transformer or cover for the 6070/6170 unit.
GAREX-PAINT-CHCL

Garex Touch-Up Paint Charcole

OSH-6212-M-N1-LH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
2704.148_140

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 14" Long
  • For Curbside order part # 2705.148*140
2705.148_140

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 14" Long
  • For Roadside order part # 2704.148*140
301012

Whiting C-4 Anti Lozenge Bracket Road Side ** Price by Quote Only

2705.143_150

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 15" Long

  • torsion spring for cube trucks with small roll-up door
  • Specs: .143 x 2-3/16" x 15" Long
  • For Roadside order part # 2704.143*150
2704.143_150

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 15" Long

  • Torsion spring for cube trucks with small roll-up doors
  • Specs: .143 x 2-3/16" x 15" Long
  • For Curbside order part # 2705.143*150
7176.218*29.90

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 90"

2050Z

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Zinc Coated Sold Individually

  • Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Corrosion Protected Zinc Coated)
  • Heavy Duty Construction for Maximum Durability
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Convenient Bolt-On Model
    • .......more details
OSH-6534-M-N1-RH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
K94-36408-2

LiftMaster Reset Switch LA400 with ID Resistor

  • For use with LiftMaster LA400 Series swing gate operators
  • Includes ID resistor kit
  • Includes LA400 product ID
BEARING033

Manaras 605 Ball Bearing 5/8"

27025

Doorlec Electric Motor TEFC 1 HP 115/230V DC101C

2376.156.145.550

Whiting Torsion assembly .156 wire size 14-1/2" spring length 55" shaft

CABLE_3/8SS-500

Cable 3/8" 7x19 500' Stainless Steel

K07-8007

LiftMaster Arm Hub for BG770/790

  • Also known as: G078007 07-8007 078007
BCT751L5CS

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator w/ Brake Carwash and Roller Bearing Mods

  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
OGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OPH-6112-M-N1-LH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
CRBH755L5-LH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0â„¢ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details