TB410-18SF
|
Steel Faced Laminated Bumper Black 10" x 18" 5 1/4" Projection Horizontal Installation
|
- Used on docks where excessive friction from up and down trailer
movement occurs (yard jockeys air ride trailers etc.).
- Can be used in material handling application where medium to heavy dock
protection is required
- “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
- Rubber pads laminated between steel angles and secured with 3/4” rods
- Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
- Wall mounting hole size is 7/8” diameter.
.......more details
|
|
|
|
Q080
|
|
TVB636-11SF
|
Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually
|
- Used on docks where excessive friction from up and down trailer
movement occurs (yard jockeys air ride trailers etc.).
- Can be used in material handling application where medium to heavy dock
protection is required.
- 5/8" anchor bolts mounted through pre-drilled holes into dock or can be
welded to curb angle.
- Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
- Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
- Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
.......more details
|
|
|
|
LB610-18
|
Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation
|
- For use in low to medium traffic loading docks in factories and warehouses.
- Can be used as rub rails at the sides of truck wells
- Fabric reinforced rubber pads cut from recycled truck tires.
- Rubber pads laminated between steel angles and secured with 3/4” rods
- Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
- Wall mounting hole size is 7/8” diameter.
.......more details
|
|
|
|
65_52091-12
|
|
MK-00050
|
|
BTM-BK-PCG/PR
|
|
HINGE-811-PCG
|
|
38877R.S
|
Genie Non-Configured Circuit Board
|
- Replaces the following models: 38001R1.S 38001R2.S 38001R3.S 38001R4.S 38513R.S 38514R.S 37470R1.S 37470R2.S 37470R3.S 37470R4.S 38334R1.S 38334R2.S 38334R3.S 38334R4.S
- Compatible with Series II Controls and comes with only the circuit board
- In order for this kit to function properly it is important that customers know the model of their opener.
- If unsure as to what resistor needs to be remove refer to the instructions that came with the unit
|
|
|
|
MM-00035
|
|
MH00006
|
|
MK-00013
|
|
.363-334-R
|
|
VWS-34-CHRY-OAK
|
|
VWS-34-CREAM
|
|
MOD060-12FT-MAX
|
|
Q209
|
|
CB53201000
|
|
CB380500
|
|
HW0775
|
|
PRO-GHCB-30053
|
|
14-1054
|
|
6X24SC50
|
Devanco Loop 6' x 24' saw-cut 50' lead-in
|
- Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
- Ideal for use on existing asphalt or concrete surfaces
- Features a non spliced continuous wire throughout loop turns and lead-in.
- requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
|
|
|
|
MU33-2WIRE-RH-Y
|
|
PRO-H-7553U-LH
|
|
MX00128-A
|
|
2807.206.325
|
|
MD-00111
|
|
PRO-HBH10053U-R
|
Micanan 1 HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand
|
- 1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator
Ideal for Sectional Doors Rolling Steel
- Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
- N-1 Through-beam (MK-00649) photocells included. Other options available.
- 3-btn O/S/C (02-103) wall control station included
- Adjustable Friction Clutch 5L320 drive belt
- #50 Roller chain 18 tooth door sprocket included
.......more details
|
|
|
|
PRO-HBH-5011U-R
|
Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand
|
- 1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator
Ideal for Sectional Doors Rolling Steel
- Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
- N-1 Through-beam (MK-00649) photocells included. Other options available.
- 3-btn O/S/C (02-103) wall control station included
- Adjustable Friction Clutch 5L320 drive belt
- #50 Roller chain 18 tooth door sprocket included
.......more details
|
|
|
|
.207-3-7.5-LHW
|
|
.207-3-7.5-RHW
|
|
PRO-GH-10053U-R
|
Micanan 1 HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand
|
- Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
- Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
- External radio control terminal strip
- Three button O/C/S control station Nema-1
- Supplied with Nema-1 photocells
- Emergency chain hoist with electrical cut-out switch for manual operation
.......more details
|
|
|
|
BRAKE012
|
|
VBELT_5L370
|
|
221816
|
|
TRACK-3"-RAW-12
|
|
PRO-GH-5011U-L
|
|
MD-00173
|
|
PIVIN-BCSI-BASE
|
|
MB-03102
|
|
MGJ-5011U-RH
|
LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Right Hand
|
- MGJ is designed for use on rolling grilles and shutters.
- Maximum recommended duty cycle: 12 cycles per hour.
- Heavy-duty wormgear-in-oil-bath speed reducer
- 3-button station for open/close/stop functionality
- 315 MHz radio receiver is integral to the Medium-Duty Logic board
- UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)
.......more details
|
|
|
|
029-98100
|
|
K20-1075B2LPH24
|
|
PRO-HBH-7583U-L
|
Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand
|
- 3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator
Ideal for Sectional Doors Rolling Steel
- Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
- N-1 Through-beam (MK-00649) photocells included. Other options available.
- 3-btn O/S/C (02-103) wall control station included
- Adjustable Friction Clutch 5L320 drive belt
- #50 Roller chain 18 tooth door sprocket included
.......more details
|
|
|
|
TRACK-3"-RAW-16
|
|
26CW945255-CUT
|
|
NUT013
|
|
MX00203
|
|
.375-6-R
|
|
9234001.003
|
|
MP-00037
|
|
ST14COP-50
|
|
TMQ-GRG826-80:1
|
|
Q088
|
|
PRO-H-7511E-LH
|
|
.312-6-R
|
|
1004-134-12'
|
|
GT751L5
|
LiftMaster Heavy Industrial-Duty Trolley Op. 3/4 HP 115V
|
- Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
- GT operators are directly attached to drive and control the door
- MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
- Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
- High-starting torque continuous duty motor with overload protection
- Door speed approx. 11-12 inches per second
.......more details
|
|
|
|
39913625
|
|
OTBH-6232-APT-C
|
|
R5220
|
Sheave Strap 3"
|
- Sheave strap also known as fork only
- Same as part number 302
|
|
|
|
PRO-LH-5011R-RH
|
|
.343-514-R
|
|
COOKSON-45-GREY
|
|
41D7570
|
|
L-4-18-0-M
|
Cable Tie Standard 18 LB Black 4" Nylon 1000/pkg
|
- Length: 4.12" / Width: .095" / Thickness: .042" / Diameter: .875"
- Low insertion and pull through force
- Advanced pawl and teeth design
- Angled tail provides quicker initial insertion alignment
- Tail finger grips allow easier handling and tightening
- Rounded edges provide added safety and eliminate insulation damage
.......more details
|
|
|
|
OTBH-6233-1-CON
|
Manaras Trolley Operator 3/4 HP 208V 3 Ph Contactor Model
|
- Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
- 25 cycles per hour 80 cycles per day
- It incorporates a drum-band type solenoid brake.
- Tracks are an extra 36 lbs per track
- 3/4 HP & 1 HP operators come with #41 full roller chain
|
|
|
|
71-EB208H
|
|
BK020/PR-BOLT
|
|
PRO-HBH-7521U-R
|
Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)
|
- 3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator
Ideal for Sectional Doors Rolling Steel
- Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
- N-1 Through-beam (MK-00649) photocells included. Other options available.
- 3-btn O/S/C (02-103) wall control station included
- Adjustable Friction Clutch 5L320 drive belt
- #50 Roller chain 18 tooth door sprocket included
.......more details
|
|
|
|
EC002-277
|
|
28020010-500
|
|
19-5118
|
|
Q248
|
|
19-5118-NP
|
|
BRAKEPART016
|
|
7272105
|
|
19-41ML-NP
|
|
19-5112-NP
|
|
MGS20-Y-2U-06
|
Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 6ft Long
|
- ��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
•3-sided activation allows for immediate stopping or reversing of motion
•Contours to round or square posts.
•Temperature range: -30F to 155F
•Lead wire: 18 gauge 2ft length
•Sensitivity: nominal 6-8 PSI
•2 wrie NO configuration
•ANSI/UL325 recognized component
•Cannot be bent
•One year warranty
|
|
|
|
PRO-HBH-7523U-R
|
Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)
|
- 3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator
Ideal for Sectional Doors Rolling Steel
- Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
- N-1 Through-beam (MK-00649) photocells included. Other options available.
- 3-btn O/S/C (02-103) wall control station included
- Adjustable Friction Clutch 5L320 drive belt
- #50 Roller chain 18 tooth door sprocket included
.......more details
|
|
|
|
41A2770-17
|
|
CLUTCH-ASY-MCJH
|
|
.306-6-R
|
|
9150000622
|
|
1007-1-5/8-10
|
|
1007-1-5/8-12
|
|
26CW94522
|
|
26CW94322
|
|
CB5320500-KOR
|
Cable 5/32" 7x19 500' Galvanized Supreme
|
- Galvanized cable 5/32" 7x19 500ft spool.
- Cable break strength: 2800 lbs
- A higher quality cable compared to the Chinese cable.
- Meets endurance test requirements of over 35000 work cycles
- Lubricated for flexability and longer service life
|
|
|
|
ZT35081029
|
|
.295-334-L
|
|
K23-19380-2
|
|
T114
|
|
5001-8-CHARCOAL
|
|
T012
|
|
HSC-1000
|
|
10-1000-10FT
|
|
100MAPS
|
|