Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

  • Steel construction Zinc plated
  • Cross ref: Eberhard 4300
MK00736

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored ** use MK00641-NM

  • For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
  • Board has 5 relays
5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

42-31247

LiftMaster Terminal Block 20A 600V

  • 3-position
MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW
2X6SC50

Devanco Loop 2' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
K20-1075C-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph

G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

  • Heater used in BG type gate operators
MJ7104

Doorlec Utility Switch 21800

  • Utility switch with a 'NO' and a 'NC' contact
  • Adjustable arm with roller
M18

LiftMaster Remote Control Tester *** No Longer Available

Z9405

Coupler 1-1/4" Bore Non-Adjustable

  • Malleable iron for strength
  • Set screws and jamb nuts installed
  • 1-1/4" Bore with 1/4" keyway
  • Length: 3.9"
MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

  • Activates one gate or device
  • Supplied with F-connector and whip antenna
  • Mounting bracket supplied
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
  • .......more details
K74-G0589

LiftMaster Hall Effect Sensor

  • For SL595 gate operator
PRO-TB-5011-R

Micanan 1/2HP 115V 1P Trolley Operator with Brake - Contactor

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
41A7635

LiftMaster Transformer 100V

  • For model: 8550
AC7

Felco C7 Cable Cutter 3/16" Capacity

  • Tool length: 8"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 7mm / 0.28in
  • .......more details
41C0279

LiftMaster Light Socket for Sec+ 2.0

  • New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
  • Compatible with LiftMaster garage door openers manufactured from 1993 to present.
  • New "insulated" design eliminates interference from CFL bulbs therefore better remote control range
ME00057-COMPLET

Micanan Clutch Shaft Complete for PRO-APT (SCLUTCHSHAFT) MX00213

  • For model PRO-APT
.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #1208 T #70161
HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

  • Measures 7" from end to end
  • Measures 5.5" from eyelet to eyelet
.234-2-R

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.218-134-L

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.218-134-R

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
MV00077

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when the door is locked
CR2032

Maxcell/Renata 3V Lithium Button Cell

ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

ME112-R

Miller Edge Black 2W Non Monitored RH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors and gates.
  • Retrofits easily to 1" to 1-1/4" sectional doors
  • Touch sensitive signaling allows for immediate stopping/reversing of motion
  • For sectional doors: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order
  • Lead wire: 22 gauge univversal
  • .......more details
ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
  • .......more details
ME113-R

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
  • .......more details
.319_6"-LH

Torsion Spring .319 x 6" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
.283_6"-LH

Torsion Spring .283 x 6" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 6"
  • Length: 12 ft
.363_5-1/4"-LH

Torsion Spring .363 x 5-1/4" x 12ft LH Green/White

  • Wire size: .363
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.393_3-3/4"-LH

Torsion Spring .393 x 3-3/4" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.312_3-3/4"-LH

Torsion Spring .312 x 3-3/4" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.306_3-3/4"-LH

Torsion Spring .306 x 3-3/4" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.243_3-3/4"-LH

Torsion Spring .243 x 3-3/4" x 12ft LH White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.283_2-5/8"-LH

Torsion Spring .283 x 2-5/8" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.250_2-5/8"-LH

Torsion Spring .250 x 2-5/8" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.234_2-5/8"-LH

Torsion Spring .234 x 2-5/8" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.283_1-3/4"-LH

Torsion Spring .283 x 1-3/4" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.262_1-3/4"-LH

Torsion Spring .262 x 1-3/4" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.234_1-3/4"-LH

Torsion Spring .234 x 1-3/4" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

  • This innovative monitor lets you check and close the garage door or gate from any room in the house.
  • Green and Red LED lights indicate whether the garage door or gate is open or closed.
  • Volume controlled audible alert lets you know when the garage door or gate is being opened.
  • Able to monitor and close up to four garage doors or gates.
  • Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.
LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

  • Caulking gun for LSBLK / LSGRY
41B5424

LiftMaster Belt Idler Pulley and Bracket (Built Years 2000+)

  • This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers that utilize a T-rail
  • Fits models: 2500 2580 3280 3850 3500
41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

  • Gear and sprocket assembly for belt drive units after 2002.
  • Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.
23-2017

LiftMaster Limit Switch SPDT

19-41HL

Half Link #41

  • Half link for #41 chain
  • ANSI Standard Carbon Steel
CAM005

Manaras Limit Cam 5/8-18 UNF

  • Limit cam for Mountshaft009
  • 2 cam's required per shaft
.468_6"-RH

Torsion Spring .468 x 6" x 12ft RH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 6"
  • Length: 12 ft
.295_6"-RH

Torsion Spring .295 x 6" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.375_5-1/4"-RH

Torsion Spring .375 x 5-1/4" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.312_5-1/4"-RH

Torsion Spring .312 x 5-1/4" x 12ft RH Yellow

  • Wire size: .312
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.406_3-3/4"-RH

Torsion Spring .406 x 3-3/4" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.363_3-3/4"-RH

Torsion Spring .363 x 3-3/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_3-3/4"-RH

Torsion Spring .250 x 3-3/4" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.295_2-5/8"-RH

Torsion Spring .295 x 2-5/8" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.243_2-5/8"-RH

Torsion Spring .243 x 2-5/8" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.306_2"-RH

Torsion Spring .306 x 2" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 2"
  • Length: 12 ft
.295_2"-RH

Torsion Spring .295 x 2" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 2"
  • Length: 12 ft
.250_2"-RH

Torsion Spring .250 x 2" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 1-3/4"
  • Length: 12 ft
25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

  • Steel construction Black E-coat finish
  • Consist of roller clamp wear plate stud plate and 5/16" lock nuts
  • Stainless steel studs and nuts
  • Cross ref: 5600
19-41ML

Master Link #41

  • For #41 chain
  • ANSI Standard Carbon Steel
12563

Doorlec Upper Brake Shoe - Right ** To extent of inventory

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
  • .......more details
BK002

Residential Top Bracket Low Headroom Sold Individually

  • Bright zinc plated 10-gauge steel
  • 3/8" roller offset
SESMT03

Erone Wall Support for Transmitter

  • Wall support for one S2TR2641 transmitter
  • Color: Grey
  • Velcro and mounting hardware included
MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

  • Input / clutch shaft kit for MJH built after 1999
TRANSF088

Manaras Transformer 480-24V 40VA

  • Transformer 480V Primary 24V Secondary 40VA
VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

  • Used on MJ / MJH models
  • New belt type A replaces old 4L360. Part number VBELTA34
LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

  • Fits old medium-duty Manaras operators such as MDJ
  • SPDT - Cherry
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length ** Quote ONLY

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
2238.096

Whiting Coldsaver Intermediate Panel 14-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 19683 (set by nine trinary dip switches)
  • RF frequency: 318 MHz
  • Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787
  • .......more details
41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

  • Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
  • This is an excellent quality aftermarket product
217436

Linear Drive Sprocket - Chain (HCT)

HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
232168

Capacitor 3/4 HP 220V 65 MFD

  • For LCO75 only
1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

1209.1

Whiting Stainless Steel Truck Door Side Hinge with Roller Cover

1003-6.5"-100FT

Bottom U-Rubber 6.5" Black 100' Long

  • 100ft spool of vinyl insert.
1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

  • For 1-3/8" doors.
  • Color: Black
1019-1-3/8-8'

Rigid Vinyl Bottom Retainer Flat 8' Long

  • Black - for door thickness of 1-3/8"
1015-1-3/4-14'

Rigid Vinyl Bottom Retainer Raised Centre 14' Long

  • Black - for door thickness of 1-3/4"
1006-1-3/8-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

  • For door thickness 2"
1005-1-3/8-24'

Aluminum Bottom Retainer U-Shaped 24' Long *** 24' is DISC

  • For door thickness 1-3/8"
1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4" • DIE # ES18191
1004-134-24'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 24 ft***Actual Length 24'4"****

  • For door thickness 1-3/4"
  • DIE # ES19244
1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
  • DIE # ES18009