Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
CP-SW-AT

Lynx Single Limit Switch

LYNX-RCVR-OCS

Lynx O/C/S Receiver

  • For use with Lynx o/c/s transmitter # T3B-OCS
Compatibility chart
T1B-DS

Lynx 1-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Use with receiver (RA-LYNX-RCVR) for open/close on commercial operators
  • Same as model 2211-L (TX)
    • .......more details
Compatibility chart
PL-A03-OLD-BRD

Lynx Replacement Logic Board Old Version ** This item is no longer available (NLA) **

  • Old version board works on operators with a blue cover
  • Replacement logic board for Napoleon/Lynx Proline garage door opener
  • For openers built before 2008
  • This board has a transformer (the new board does not)
CP-CRG-NEW

Lynx Auto Re-Connect Carriage 14-1/2" Arm Sold Separately

  • Will work on most brands of commercial trolley operators using 2" angle tracks.
CP-CRG-OLD

Lynx Auto Re-Connect Carriage 20-1/2" Arm Sold Separately *** Discontinued

  • Will work on most brands of commercial trolley operators using 2" angle tracks.
CP-SW-HOIST

Lynx Interlock Switch

3-34-1

Low Headroom Quick Turn Top Bracket - Set of 2

  • Allows the top door panel to turn quicker saving you 2"- 4" more space. Also allows vertical tracks to be cut down up to 2" allowing more room above springs for operator installation in extreme low headroom situation
  • Sold as a set of 2 brackets
  • Requires 2 rollers per bracket - rollers sold seperately.
  • For residential garage doors.
  • Use with 12" & 15" curve 2" track
H14G06

Hinge #6 x 14 gauge ** To extent of Inventory

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #6 position
  • Use between sections 6 and 7
  • Same as part number 246
    • .......more details
H14G05

Hinge #5 x 14 gauge ** To extent of Inventory

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #5 position
  • Use between sections 5 and 6
  • Same as part number 245
    • .......more details
H14G01

Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #1 position
  • Use between sections 1 and 2 or in the center position
  • Same as part number 241
    • .......more details
877LM

LiftMaster Sec+ 2.0 Keyless Entry

  • Features Security+2.0™ rolling code technology
  • One-button-to-close feature
  • Temporary password option
  • Program code directly from keypad
  • Backlit keypad
  • Includes 9V battery
    • .......more details
877LM Manual
I500

Erone 1100lbs Exterior Maglock Surface Mount Stainless *** To extent of Inventory Repl. by ESM500

  • 1100 lbs holding force ( VS15R)
  • 12/24Vdc – Current Draw: 550mA @ 12Vdc – 280mA @ 24Vdc
  • 220mm (H) x 64mm (W) x 40mm(D) (8.6in x 2.5in x 1.5in)
  • Exterior applications & High-traffic areas
  • Includes monitoring capability
  • Stainless steel
    • .......more details
Installation manualManuel d'installationSell sheetDrawing
S2TR2641E2

Erone 2-Channel Mini Transmitter 433MHz

  • Open/Close remote for 2 doors
  • Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
  • Learn button programming
  • Ergonomic stylish design Rugged & durable
  • Light grey base with yellow buttons
  • unobstructed range: 820 ft (250m)
    • .......more details
Sell SheetBrochureWireless System Chart
SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 2 NO relay + 2 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output Relay number 4 can be setup to latched output
  • Can be used for O/S/C
  • Power requirements: 12/24Vac/dc
    • .......more details
Sell SheetBrochureWireless System Chart
OSH-6533-ECB

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
OSH-6113-ECB

Manaras Opera-SH 3/4HP 120V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
OSH-6532-ECB

Manaras Opera-SH 1/2HP 600V 3Ph with Electronic Circuit Board ** To extent of Inventory

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
8FT-TROLLEY-SET

LiftMaster 8ft Double Angle Rail Set for Comm. Trolley Ops 19-5808-P (2pcs) *Actual length 131"*

  • Double Angle Rails for doors up to 8' 6" high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
OPH-6113-ECB

Manaras Opera-H 3/4HP 120V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

  • Double Angle Rails for doors up to 14' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 16' 11"
MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

  • Input / clutch shaft kit for MJH models up to mid-1998
  • Kit includes V-belt 4L360 to fit with newer deeper pulley
  • For MJH built after 1999 use MOUNTSHAFT001A
Drawing
TRANSF142

Manaras Transformer 575-24V 40VA

  • Transformer 575V Primary 24V Secondary 40VA
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
TRANSF143

Manaras Transformer 120/240-24V 40VA

  • Transformer 120-240V Primary 24V Secondary 40VA
LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT003
  • 2x SPDT - Unimax
  • Same as Doorlec # 21702
Limit Switch Chart
LIMIT021

Manaras Single Limit Switch with Flat Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
Limit Switch Chart
LIMIT018

Manaras Double Limit Switch without Lever

  • Double limit switch (DPDT) - Cherry
  • The extra contact is used to control auxiliary equipment
  • Applies to all current operators
Limit Switch Chart
MH5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Jackshaft Operator

  • 1/2 HP 115 volt 1 phase medium-duty hoist operator
  • Logic board with integral 315 MHz radio receiver for Open/Close or Open/Stop/Close
  • CPSU commercial photoeyes included ( Nema 4 optional)
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Emergency disconnect and chain hoist standard
  • Solenoid actuated disc brake
    • .......more details
Installation ManualManuel d'installationMH Sell SheetMH Shop Drawing
TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

  • This timer-to-close can be added to any Commercial garage door opener.
  • Use with RELAY022 (8-pin base) if required.
  • Schneider Elect. part no. RE88867215
Adding a timer
BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

  • Replaces BRAKEPART017 SHOE008
  • To use on brake drums with edges (DRUM004)
  • New part number is BRAKEPART019KIT
Installation Manual
DISCONNECT001

Manaras Floor Level Disconnect Lever

DOORARM001

Manaras Door Lifting Arm Assembly

  • Complete door arm assembly for all Manaras trolley operators.
RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
  • Maximum 16 transmitters per receiver.
  • Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD
RADIO-EM103MD

Manaras 3-btn transmitter configured as 3x single-btn Multiple Doors Rolling Code 390 MHz

  • Open/Close remote for 3 doors
  • LED indicator CR2032 battery and visor clip included
  • Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
Manual
RADIO-EM103SD

Manaras 3-btn transmitter configured as O/C/S 1 door Rolling Code 390 MHz

  • Open/Close/Stop remote for 1 door
  • Operates single door: O/C/S configuration
  • LED indicator CR2032 battery and visor clip included
  • Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
Manual
RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

  • Open/Close/Stop remote for 4 doors.
  • By selecting A B C or D on the rotary switch you can operate any of the four doors.
  • Comes with LED battery life indicator.
  • 9V battery included.
  • Can be wall or post mounted.
  • Must be used with 4 MCR series receivers.
    • .......more details
Programming Instructions
RADIO-22

Manaras MT3-1000 3-btn transmitter 313 MHz

  • Open/Close remote for 2 doors
  • Comes with LED battery life indicator
  • 9V battery included
  • Sunvisor clip included
  • To extent of inventory replaced by RADIO-EM903
Programming Instructions
7145.96

Whiting Bottom Seal For Coldsaver 96" long

  • Aluminum retainer sold separately
2376.192_31.930

Whiting Torsion assembly .192 wire size 31" spring length 93" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.162*180
5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

  • Most common side seal for Whiting Dry Freight doors.
  • 115 inches will fit almost every size door.
2234.296

Whiting Coldsaver Bottom Panel 12-1/2" x Max 96" with lock seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
2238.096

Whiting Coldsaver Intermediate Panel 14-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
108210

Linear 1-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close mini remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
1920

Whiting Top Closure Mounting Plate for Insulated Doors

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates one device
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
DR4

Linear 4-Channel Delta3 Receiver 310 MHz *** To Extent of Inventory

  • Activates four devices or UP DOWN STOP for one commercial device
  • 310 MHz 8 dip switch
  • Power: 24 VAC/VDC
  • Dimensions: 4.9" W x 4.2" H x 1.3" D
  • Same as DNR00023A or DR4V
Programming Instructions
GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

  • Auto voltage sensing - no jumpers to set
  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

  • Open/Close remote for 3 doors
  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 6561 (set by trinary dip switches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

  • Open/Close/Stop remote for 9 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
535T

Allstar 3-btn 27-Door O/C/S Transmitter 107475 318 MHz ***Replaced by P-535T

  • Open/Close/Stop remote for 27 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
HAE00032

Linear 8ft Chain Assembly (HCT8)

HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

  • Universal 11-pin harness
HAE00049

Linear Drive Sprocket Holder and Belt Clamp

218189-01

Linear Trolley Assembly

218954-03

Linear Pulley & Bracket Assembly - Belt (HBT)

HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
219109

Capacitor 1/3 HP 43-53 MFD 250V

  • For LDO33 only
232168

Capacitor 3/4 HP 220V 65 MFD

  • For LCO75 only
1336.7

Whiting Stainless Steel Curbside Top Closure Bracket for 8" radius

1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

15.1

Whiting Truck Door Stainless Steel Center Hinge

7952

Whiting Truck Door Stud Plate Gasket

RV-100

1" Vinyl Insert for Brush Retainer per foot

  • Color: Black
  • Fits in light brush retainers
RV-200

2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
200BL

2" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1703
300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
4008-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree 5/8" Offset

  • 2" with 5/8" Offset
  • For use with Light Brush or Vinyl Insert
4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

  • 4" yellow vinyl insert 200ft spool.
1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

  • 200ft spool of vinyl insert.
1014-1-5/8-24'

Rigid Vinyl Bottom Retainer Notched 24' Long

  • Black - for door thickness of 1-5/8"
1014-1-5/8-12'

Rigid Vinyl Bottom Retainer Notched 12' Long

  • Black - for door thickness of 1-5/8"
1014-1-5/8-8'

Rigid Vinyl Bottom Retainer Notched 8' Long

  • Black - for door thickness of 1-5/8"
1015-1-3/4-16'

Rigid Vinyl Bottom Retainer Raised Centre 16' Long

  • Black - for door thickness of 1-3/4"
1015-1-3/4-8'

Rigid Vinyl Bottom Retainer Raised Centre 8' Long

  • Black - for door thickness of 1-3/4"
1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

  • For door thickness of 1-5/8" to 1-3/4"
1007-1-5/8-24'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 24'4"

  • For door thickness of 1-5/8" to 1-3/4"
  • die # A-25388
1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/8-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-3/8-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-3/8-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-3/8-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-3/4-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-3/4-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1005-2-16'

Aluminum Bottom Retainer U-Shaped 16' Long***Actual Length 16'2"***

  • For door thickness 2"
1005-1-1/2-24'

Aluminum Bottom Retainer U-Shaped 24' Long

  • For door thickness 1-1/2"
1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

  • For 2" thick doors.
1003-1-5/8-24'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
  • DIE # ES18010
1003-2-8'

Aluminum Bottom Retainer L-Shaped 8' Long

  • For 2" thick doors.
1003-1-5/8-16'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.