Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

  • For models T APT SD & GH 1/2 HP - 2 HP models L5
K001D8073-1

LiftMaster Three Phase Relay/Power Board 230/460V (K001D8397)

  • For Logic 5 commercial operators
  • 014D1279E
  • New part number K001D8397
CH501L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
H505L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
41B4103

LiftMaster Service Belt Tensioner

11-19471

LiftMaster Clutch Shaft

  • Fits model H operator with Logic 5
K72-12515-1

LiftMaster Limit Switch Kit

  • For models T H Logic 5 and various L3 L4 commercial operators
  • Also known as: K75-12515-1 K75-12514
V1001-B

Elton Dual Fin Vinyl Insert Black Price per Foot

LC2D129B7

Contactor Telemecanique 24V ** Discontinued

41D217

41D217

  • Fits model 8550
7001-8-CREAM

Commercial Side & Top Weather-Strip 8' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
7001-7-SANDSTNE

Commercial Side & Top Weather-Strip 7' Long - Sandstone 7001-SS (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
K72-12508

LiftMaster Output Shaft Kit (1/3 & 1/2HP)

  • For commercial operator model T
Installation Manual
GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

  • Thermoplastic resin weatherseal co-extruded.
  • For Commercial / Residential applications
  • Screws directly to the top of door no retainer required
OTBH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
MX00037

Micanan Brake Assembly for PRO-J/H Solenoid NOT included

  • Brake assembly does NOT include the solenoid
753

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#3PT) 1000/Box

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)
1005-2-12'

Aluminum Bottom Retainer U-Shaped 12' Long***Actual Length 12'2"***

  • For door thickness 2"
K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

  • Plastic replacement box only
Z3/Z5

Erone Z-Bracket for Maglock ** No Longer Available

  • For use on: 300-KG 400-KG and 500-KG electromagnetic locks
  • High quality aluminum construction
  • Dimensions: 175mm (long) x 50mm (wide) x 50.5mm (depth
Wireless System Chart
PULLEY014

Manaras Motor Pulley Standard 2" x 5/8" 5L/B

SPR41B60X1

Sprocket 41B60 for a 1" Shaft

BEA-REMOTE

BEA Falcon/LZR Programming Remote

  • Makes it easy to set up and make adjustments to all key parameters of the Falcon motion detector while at ground level
Programming instructions
580LM

LiftMaster Alternate Power System RJO Interface

  • Exclusively for use with Wall Mount Opener model 8500
  • Makes installing the Wall Mount Opener model 8500 easier when an outlet is not available within 6 feet
  • Puts power right where you need it and removes the need for an electrician
  • UL-approved
  • Includes transformer box interface box 35 feet of low-voltage wire and all required mounting hardware
Installation ManualManuel d'Installation
SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

  • Red and Green LED traffic light
  • Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
  • 24 volt DC input voltage only
  • Long lasting low power consumption
  • A simple reliable and cost-effective way to reduce accidents around the loading dock.
  • Available in two colors: safety yellow or black.
    • .......more details
Installation InstructionsInstructions d'installationWiring DiagramSchéma de connexion
7FT-BELT-LDO

Linear 7ft Belt Drive Rail for LD050/LS050/LDCO (HBT7C)

  • 7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
PROMI-500

Erone 1-Door Stand Alone Card Reader / Keypad **DISC

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
    • .......more details
PROMI-500 Wiring Diagram & Instructions
DF084.1

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

  • Standard features include: 2-cable balancer with independent springs
  • Balancer springs treated with rust preventative
  • All door hardware is E-coated
  • Spring loaded lock catch
  • Heavy-duty 2" 13-gauge track
  • Stainless steel aircraft cables
    • .......more details
M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

  • Same as part # 65893 and 97244
  • Visor mount
  • Includes battery CR2032
  • Made in Germany
Instructions
M3-3313

Marantec 3-Button Transmitter 315 MHz 97245 ** Discontinued

  • Same as part # 65894 97245
  • Includes battery CR2032
  • Made in Germany
Instructions
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation
EL25KEY

LiftMaster Replacement Key for EL25 (041B0012)

  • One (1) key for the EL25
  • Same as 041B0012
36179R

Genie Traveler Assembly for Screw Drive

  • Fits model 3060 L/M
  • Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R
CR-2000

EMX Keypad/Card Reader Waterproof 5401-1

  • Back-lit keys for nighttime operation
  • 2000 users (card or passcode)
  • Rugged waterproof design and vandal resistant
  • 9-24 VDC
  • Tamper alarm
  • Door call button
    • .......more details
Instruction ManualSpec Sheet
MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

  • 1/2 HP 120 volt 1 phase medium-duty logic trolley operator
  • Medium-duty logic board with integral 315 MHz radio receiver
  • CPSU commercial photoeyes included
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
  • 2 year warranty
    • .......more details
Installation manualManuel d'installationProduct guideGuide de produit
08-11013

LiftMaster Bevel Gear 3/4" ID

  • Fits the LiftMaster GH operator
SPREADER002

Chain Tensioner for 1" / 1-1/4"

  • Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
MX00149

Micanan Complete Clutch Shaft Assembly for PRO-H

736

Fasteners Round Head Carriage Bolt 5/16-18 x 3/4" Gr 2 1000/Box

  • Full length thread
  • Max torque = 12
71-90503000

LiftMaster Non-Resettable Counter Field Kit

  • A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
  • This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
  • This corresponds to the number of complete door cycles of use.
Installation Manual
BK100

Spring Anchor Bracket Mini USA Sold Individually

  • Adjustable residential center bracket
  • Bright zinc plated 12 gauge steel
  • Adjustable bearing plate
  • For 1-3/4" to 2-5/8" ID springs (Adjustable center line 2-3/8" to 4-1/4")
  • For use with steel or nylon bearings
  • Bearings NOT included
    • .......more details
3AG2

Miniature Fast Acting Glass Fuse 2 Amp 250V (5/pkg) - 766122

  • 6 x 30mm miniature fast acting glass fuse
  • Rated voltage: 250V
  • Rated current:2A
  • ROHS compliant
1005-1-3/4-10

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
PRO-GH-VFD

Micanan Variable Speed 1 HP 208/230V 3 Phase Operator

  • Variable Frequency Drive Operator
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

  • Zinc plated
  • 12 gauge roller carrier and base plate
  • Adjustment of 7/16" minimum to 3-1/2" maximum
  • Good for use with 3" hardware
29-NP712

Lead Acid Battery 12V 7A

Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

1013-1-1/4-9'

Rigid Vinyl Bottom Retainer L-Shaped. 9' Long

  • For door thickness: 1-1/4"
Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

  • Pusher spring 27" long with a large 3" tip. Sold as a pair
  • 11lbs of initial pushing strength per spring+ 3lbs per inch per spring
MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No cables or coiled wires
    • .......more details
Programming Instructions
MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

  • MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
  • It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
  • Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
  • Features Include:
  • Internal antenna
  • 1-6 digit PIN for each user
    • .......more details
Installation Manual
K75-18364

LiftMaster Arm Assembly Kit for SW470

  • Complete arm kit for SW470 gate operator
15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

15-50B18LGH

Sprocket 18 Teeth 1" Bore 1/4" Keyway

10FT-TROLLEY-SET

LiftMaster 10' Track Set for Trolley Operator 10-5810-P (2 pcs) *Actual length 155"*

  • Actual Length 12' 11"
  • Includes 2 pieces of 10-5810-P
STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

  • Rapid learn feature programs multiple transmitters in just seconds
  • Ideal for gated communities parking lotsand garages.
  • Works on a tri-band frequency
Programming InstructionsSell sheet
PRO-W_MOD

Micanan Nema 4/12 Modification

  • This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.
85LMC

LiftMaster Plug-In Power Supply

  • Plug-in jack for easy installation on Liftmaster receivers
  • Power input level: 105-135AC 24AC output
41C0279

LiftMaster Light Socket for Sec+ 2.0

  • New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
  • Compatible with LiftMaster garage door openers manufactured from 1993 to present.
  • New "insulated" design eliminates interference from CFL bulbs therefore better remote control range
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
CABLE_316SS-500

Cable 3/16" 7x19 500' Stainless Steel

Comparison charts
TUBE_SHAFT_8FT

Hollow Shaft 1" x 8'-10" Galvanized 16 gauge

TUBE_SHAFT_18FT

Hollow Shaft 1" x 18'-10" Galvanized 14 gauge

888LM

LiftMaster MyQ Control Panel with TTC Sec+ 2.0 *No Longer Available*

  • Works with ANY Liftmaster Sears Chamberlain Access Master Master Mechanic Formula I True Value True Guard and Raynor Garage Door Opener Manufactured after 1998 using a amber / orange yellow or purple learn button.
  • Replaces existing control panel
  • Simple programming of new MyQ accessories and Security+ 2.0 remote controls and keyless entry products
  • Motion-activated opener light control
  • Adjustable light timer option
  • Lock feature
    • .......more details
Installation ManualManuel d'InstallationSell Sheet
883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

  • Controls garage door operation and opener lights
  • Easy and fast programming
  • Compatible with Security+ 2.0 and MyQ remotes and accessories
Installation ManualManuel d'Installation
50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

  • Nema 4
  • 3-wire air switch; 1-NO and 1-NC contact
  • Mosley
  • NO contact on Yellow and Green
CPS-RPEN4

LiftMaster Monitored Retro-Reflective Photo Eye with Nema 4 Enclosure for Commercial Door Applications

Installation ManualManuel d'InstallationSell Sheet
MX00147-NEW

Micanan Complete Clutch Kit for PRO-TB New Style Frame (MX00211)

  • After January 2006
  • 8" Diameter pulley
  • Feb 2017 - new part number MX00211
.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.218-258-R

Cut-to-Length Torsion Spring .218 x 2-5/8" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
C-200-INSTALLED

Cones 2" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF200
.262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
41A7562

LiftMaster Light Lens for 8360 8550 8355

  • Replacement light lens
.283-134-R

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.283-134-L

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF175
.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.262-134-R

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.243-134-R

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.243-134-L

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-R

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-L

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
892LT

LiftMaster 2-btn Sec+ 2.0 Learning Transmitter

Programming InstructionsInstructions de programmationSell Sheet
CPS-N4

LiftMaster Nema 4 Commercial Protector System Photo-Eyes with Interface box

  • Commercial Through Beam Photo Eyes includes:
  • 50-15514 I/R Emmitter
  • 50-15515 I/R Detector
  • 77-16011 Hardware Kit N4-CPS
  • 001C4629 CPI Housing Assembly
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
    • .......more details
Installation ManualManuel d'installation
MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

  • Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011
GK-BX

Genie Dual Frequency Wireless Keypad 37224R

  • Temporary PIN codes to allow for one time special access needs
  • Able to operate up to three Genie Intellicode garage door openers
  • Auto-seek dual frequency technology automatically transmits in both 315 and 390 MHz
  • Compatible with Intellicode 1 and Code Dodger series
Programming Instructions
107999.0001.S

Genie Motor Pulley for Overhead JST

855LM

LiftMaster HomeLink Repeater Kit

  • This kit contains a repeater and a transmitter
  • The HomeLink repeater is only compatible with HomeLink equipped vehicles
Programming Instructions
CB14B0500

Cable 1/4" 7x19 500' Galvanized

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
NX21

Allen Bradley 24V Reversing Contactor

  • Allen Bradley no. 104-C16KJH22-X6
  • Cat no. 100-C16*10
L0172-092

Low Temperature Grease 10oz Tube

  • Lubriplate multi-purpose low temperature grease.
  • Excellent cold operating characteristics
ER100

Carlo Gavazzi Reflector 4" (100mm) Square

  • High quality reflector for retro-reflective photoelectric switches
  • Dimensions: 100 mm x 100 mm 9.2 mm thick
14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

  • I-Beam Chain Drive Rail for model 3595
7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

  • I-Beam Chain Drive Rail for model 3595
77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

  • Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.
45DCT

LiftMaster Circuit Board

  • Board: Tri-band Security+ 2.0
  • DC Chain/ Belt Drive model
  • Fits: 8360 8550
  • Also known as; 45DCBR1A 041D7356 1D7356 41DCBC1A 41DCBC3A 41DCCC2A 41DCBC5A 45DCCL5A 45DCCL3A 45DCCL1A 45DCCR5A 41D7356 45DCCR3A 45DCCR1A 001D7356 41DCCC1A 41DCCC3A 45DCJL5A 45DCRL1A 41DCCC5A 45DCRL3A 45DCJL1A 45DCJL3A 45DCBL5A 45DCBL3A 45DCBL1A 45DCBR5A 45DCRL 45DCBR3A 47DCCR1 1D8363 045DCT 45DCBL1 45DCBL2 45DCBL3 45DCBL4 45DCBL5 45DCCL1 45DCCL2 45DCCL3 45DCCL4 45DCCL5 45DCBR1 45DCBR2 45DCBR3 45DCBR4 45DCBR5 45DCCR1 45DCCR2 45DCCR3 45DCCR4 45DCCR5
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
475LMC

LiftMaster DC Battery Backup *** To Extent of Inventory

  • For use in Liftmaster 3500 3800 and 8500 models
  • 1 year warranty
Installation ManualManuel d'Installation