Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
60-7248-CBI087

Wheel Chock Safety Pkg incl'd: yellow ductile iron chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) CBI-087 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Cast Ductile Iron for Impressive Strength
  • Painted Yellow for High Visibility
  • Size: 8-1/4" wide x7-1/4" long x 8-1/2" high
60-7248-IC10

Wheel Chock Safety Pkg incl'd: yellow formed steel chock w "tooth" like bottom wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) IC-10 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • "Tooth" Like Bottom Grips Icy/Slippery Ground Surface
  • Powder Coated Yellow for High Visibility
  • Formed Steel
  • Size: 8" wide x10-1/2" long x 9-1/4" high
IC-10

Wheel Chock IC-10 Ice Formed Steel Tooth Grip

  • "Tooth" Like Bottom Grips Icy/Slippery Ground Surface
  • Powder Coated Yellow for High Visibility
  • Formed Stee]l
  • Size: 8" wide x10-1/2" long x 9-1/4" high
1004-2-16'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 16 ft***Actual Length 16'2"***

  • For door thickness 2"
LR110LTB3815

Telco Thru Beam Receiver M12

  • Remote receiver Series 110
  • M12 x 1 Housing Size
  • Nickel Plated Brass Housing Material
  • 15 m Cable Cable Connection
  • IP 67 Sealing Class
STEELCRAFT_PANEL_SEAL

Steelcraft Intermediate Section Seal V-Bead Sold by the Foot

CAPCELL

LiftMaster Cellular 4G/LTE Modem with Wifi

  • Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
  • Sign up with your preferred carrier or add on to your current plan.
  • Avoid trenching and wire pulling for speedy installations.
  • Eliminate plain old telephone service (POTS) and improve reliability.
  • Compatibility: At&t® Verizon® T-mobile® Bell® Rogers™ Telus®
  • Capacity: Connect up to 4 wired or multiple Wi-Fi devices
    • .......more details
SRB-3

Standard Riser Bracket for 6" Above Dock or Less 3"

  • Standard 3" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
C-RING

Contact Ring for Centrifugal Switch in Single Phase Motor

MK01065

Micanan Light Duty Resistor 2 OHM 25W c/w Wire Leads

MR-00021

Micanan Trolley Chain Drive # 41 792 Links for 3/4 1 HP 14ft High Door

DBE-30

Molded Rubber Bumper Black 30" L x 4 1/2" W 3" Projection 6-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
DBE-20

Molded Rubber Bumper Black 20" L x 4 1/2" W 3" Projection 4-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 4 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 10" L x 4 1/2" W 3" Projection
    • .......more details
LB912-36

Laminated Bumper Standard Black 12" x 36" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB436-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB406-24SF

Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
K75-36914

LiftMaster Electrical Box Cover APT T GT SD GSD GH - L5

LB412-36SF

Steel Faced Laminated Bumper Black 12" x 36" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8065

LiftMaster Contractor Series 1/2 HP AC Chain Drive Garage Door Opener **DISCONTINUED

  • MyQ® Technology enables you to securely monitor and control your garage door opener and houselights with your smartphone tablet or computer.
  • 1/2 HP AC motor with industrial-strength chain drive provides steady performance and lifting power.
  • Security+ 2.0™ safeguards your household – with every click a new code is sent to the garage door opener so that the door opens only for you.
  • The Protector System® has safety sensors that project a light beam across the garage door opening automatically reversing the door if anything interrupts the beam.
  • Comes with: 1-Button Remote Control (891LM) Door Control Button (883LM)
LB410-24

Laminated Bumper Standard Black 10" x 24" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-14

Laminated Bumper Standard Black 10" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
ME00010

Micanan Input Shaft PRO-J 3/4" x 11-9/16"

RESET014

Manaras Resettable Overload Fuse 17A 1 Phase

HINGE-411-PCG

Powdercoated Hinge #4 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #4 - 0.74 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
LA500XL20W

LiftMaster Single Arm Solar Package for LA500 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA500DC)

  • Kit Includes: LA500DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
  • For dual gates order extra LA500DCS secondary arm
  • Updated unit complies with new UL325 code revised Jan 2016
  • Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
Manuel d'installationInstallation manualSell SheetBrochure
PRO-X_MOD-1/575V

Micanan Explosion-Proof Modification N-7/N-9 for 1HP 575V

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
MM-00126

Micanan Wall Mounting Plate (Reducer 80/100)

PRO-PL-10053-E

Micanan Wall Mount Control Panel 1HP 575V Non-Monitored ECB

  • Standard features include: N-4/12 12" x 10" x 6" panel B-2 C-2 D1 E2 T TS Mid-stop control functions Time delay on reverse On-board radio receiver hinged cover backplate primary fuses in panel
  • If PBS on cover required an additional charge will apply
  • If panel not ordered with an operator an additional charge will apply
CP-NCAM

Lynx Limit Cam 5/8-24 Travelling

  • Limit cam / limit nut
MX-00016

Micanan TEFC Motor Upgrade Modification

  • TEFC motor upgrade for 1-phase belt drive operators
BINS-WHITE

Utility Bin Heavy-Duty Stackable White *** To Extent of Inventory

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
MD00002

Micanan Bevel Gear 20 Tooth 5/8" ID

  • Comes with keyway and 2 set screws
  • Used on PRO-GHCW
2806.139*170

Whiting .139 x 2-3/16 x 17" L Roadside with Cones

  • For Curbside order part # 2807.139.170
MP-00002-110V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
MOD076

Manaras Motor 208V/1Ph 60 Hz Modification No extra charge

  • The standard 240V/1Ph op. is coverted to 208V/1Ph incoming power supply
26CW94523-CUT

Truck Door Intermediate Panel (13" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

  • Designed to reduce the risk of the door falling in the event of spring breakage
  • 3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
  • For 1" shaft (1-1/4" shaft available for special order)
  • Fits 1-3/4"-6" Torsion Springs
  • One device per spring is required
  • Not for use with duplex springs
    • .......more details
5001-7-WHITE

Residential Side & Top Weather-Strip 7' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MV-00147

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Key Lock-out & Pilot Light 24V

26CW94525-CUT

Truck Door Intermediate Panel (15" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
RB741

Linear / GTO 1-Button Transmitter 318 Mhz

  • Standard transmitter included with all GTO gate operators
  • Much smaller in size than previous model and improved signal range
  • The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
  • It is compatible with GTO and Mighty Mule gate operators
  • The code settings are the 9 dipswitches located inside the cover.
  • Measures: 2-1/2 H x 1-1/2 W x 9/16 D.
    • .......more details
50183

Doorlec Brake Assembly 575V

  • Brake assembly consists of solenoid drum shoes plate spring cover and fasteners
  • For all V-belt driven models that have brakes
.306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
MK01245

Micanan Fuse 3A 250V Sold Individually

  • For Micanan circuit boards
  • Sold per fuse
MP-00039

Micanan High Cycle Mod. for PRO-TTB

  • Modification only
  • For installations that exceed 100 door cycles per day
  • Includes cast iron flanged precision bearings on all shaft and delay on reverse circuit
  • Supplied with #41 chain
25-60100

Truck Door Fork Lift Plate

  • Steel Construction
  • Black E-coat finish
  • Allows use of fork lift to open door from truck bay or when loads shift against door
  • Cross Reference: T # 69131 W #1092
  • Dimensions: 18" long x 5.5" tall with 1.5" lip
41A5483-2C

LiftMaster Circuit Board Assembly *** To extent of inventory

  • Assembly includes: Circuit board and end panel
  • For chain drive units with one light
  • Fits models 2245 & 2255
  • Last letter of the part # indicates revision date the most recent product will be sent out
OCDFX3

Overhead Door 3-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX3.S GIDFX3.S
MT21-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
1116633903.S

Overhead 3-btn Transmitter 390 MHz

  • Replaces the 1091303903.S
  • 3-channel transmitter opens and closes 3 doors
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
7001-9-BRONZE

Commercial Side & Top Weather-Strip 9' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
PRO-HBH-5011U-L

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
ALUM-538

Aluminum 24" x 100' Spool Wicker / Cafe # 538

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 538
  • Reverse side is #431 Bright White
Colour chart
MA116RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 17 ft

  • For use on Mega-Arm gate operator
  • Red White reflective DOT stripe
Additional arm accessories
SPR50B14X1

Sprocket 50B14 for a 1" Shaft 1/4" keyway

CLUTCHPLATE006

Manaras Torque Limiter Plate

10FT-CHAIN-LDO

Linear 10ft Chain T- Rail for LD050/LS050/LDCO (HCT10C)

  • 10ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
MX00034

Micanan Brake Assembly for PRO-HHD Solenoid NOT included

  • Solenoid sold separately
LIMIT-KIT-BCSI

Limit Shaft Kit for BCSI Gate Operator ** Price by Quote Only

MOD008

Manaras Double Limit Switches Mod. (Per Side)

  • An extra SPDT pole is available to control auxiliary features such as lights fans etc..
  • The additional pole must be specified on either the normally open and/or normally close contact as well as on the opening and/or closing sides
  • Modification upcharge is charged per side
HSO112

Hinge 1/2-Hinge OHD "A" Style 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
26CW94625-CUT

Truck Door Top Panel w/o Hardware (15" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
ANT-1A

Linear 7-inch Rubber Duck Mid-Range Antenna *** To Extent of Inventory

  • Antenna for Linear’s 27 MHz mid-range transmitters and receivers
  • Seven-inch ”rubber duck” style
  • Supplied with CON-180A straight antenna connector
  • Order CON-90A connector for right angle antenna mounting
  • Dimensions .65” W x 7” H x .65” D
  • Same as: SNE00031
    • .......more details
7-6095

RW Hanger 323 For use with #31 track

  • Wheels: 2-1/8" diameter Formed Steel
  • Apron: Formed steel vertically adjustable 5-3/4" long x 3-1/2" wide
  • Pendant: 1/2" diameter Steel
  • Door thickness: 1-3/4" inches to 2-1/2" inches
  • Included: 1 carriage bolt 2 flat head stove bolts
  • Capacity: 1 pair for a maximum of 400 lbs
    • .......more details
MH00097

Micanan Bearing 1/2"

22-00627

Truck Door Grab Handle 13" Chrome Steel

  • Steel construction Chrome finish
  • Cross ref: Eberhard 4300
CP-MO-34-1231WP

Lynx Electric Motor Base Mount 3/4 HP 110V 1 Ph TEFC

  • Electric motor only
MG00004

Micanan Belleville Washer 13/16 ID x 1-3/16 x 1/8 (8 required per operator)

  • PRO-H/HB operator parts
  • 6 required per operator
MOTOR280

Manaras Electric Motor TEFC 3/4 HP 600V 3PH for N4/12 Applications

  • Electric motor only- not wired
  • Continuous duty base mount 56Z
K20-1100C-2LP

LiftMaster Electric Motor 1 HP 115/230V 1Ph Logic *** To Extent of Inventory

PRO-TB-7583-U

Micanan 3/4HP 208V 3 P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
1116633121.S

Overhead 1-btn Transmitter 312 MHz ** No Longer Available

  • Replaces the 1091303121.S
  • 1 channel transmitter opens and closes 1 door
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
  • Compatible with all Overhead Door 312 MHz frequency garage door openers that were manufactured before 1996.
PRO-H-5011E-LH

Micanan 1/2HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
MV-00014

Micanan Key Switch O/C Tamper Proof Nema 4 Surface Mount

MOV001

Manaras MOV Surge Protector

  • For 3-phase commercial operators
  • 680V 1800V CL.V
503267

PEEK Vehicle Loop Detector 24V with Harness Nema 1 ** Discontinued

  • Enclosed requires separate 24VAC power.
  • Wiring harness with plug for detector included.
  • OPEN only (all LiftMaster operators) or SAFETY/HOLD OPEN only (operators with type B2 T TS or T1 control wiring) when vehicle passes over loop wire
  • Requires a loop of wire embedded in the ground to connect to the detector.
  • Requires 2-wire output connection to door operator and 24VAC power
  • Also known as: G50625S24
    • .......more details
MW-00050

Micanan In-Line Torque Clutch Assembly (MP00232)

  • Friction clutch mounted in between motor and reducer flange
  • Comes with cover and studs
  • New part number MP00232
D-2-8

Keyed Disconnect Device 8ft Cable

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
MOTOR274

Manaras Electric Motor 3/4HP 575V 3PH

  • This item is compatible with BRAKE011
UR2

3M Gel Connectors Red 26-19 AWG 100/Pkg ** To extent of inventory. Repl. by 703-004

  • Scotchlok Insulation Displacement Connector
  • RUS Listed Full featured
  • Max. Diameter Insulation: 0.082" (2.08 mm)
  • AWG Wire Range: 19-26 AWG Solid Wire
  • Angle: Straight
  • Operating Temp. : -40 to 285 degree F. (-40 to 140 degree C.)
    • .......more details
28-01114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Curbside (RH) 120" Todco Style

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • Fits door sizes 101 - 114" high
  • Cross ref: T #49014-2 T #41034-2 & W #4045
G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

  • Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
  • 24VAC/VDC
  • 10' Long
9723-48

Whiting Pull Strap 48" with Steel Retainer

  • 48" long
G651209P

LiftMaster 10ft PVC Arm Square Yellow/Black Stripes **DISCONTINUED

  • Requires clamp model # G108019 sold separately
  • For use on barrier gate operator BG770
28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

  • Kit includes part # 28018A and # 28019A
  • Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
  • Includes 1 Belt Bullet and 2 Retainers
41A6298

LiftMaster Hardware Installation Bag for 3800

RESET008

Manaras Resettable Overload Fuse 11A 1 Phase

108D36

LiftMaster Light Lens (K108D0036-2)

  • Compatible with one light operators
  • Compatible with the following Liftmaster models: 1040 1045 1055 100WD 200WD 1140 1145 1155 110WD 210WD3 1240 1245 1255 215WD 15WD 1240R 1245R 1255R 985 1046 1146 1246 1246R 1056 1156 1256 and 1256R
  • Compatible with the following Chamberlain models: 2000 2100 and 2200
  • Dimensions are 7-1/4" wide X 4-3/4" high X 3" deep
4007-14FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
39914650

Hitch Pin Forged Wire Handle 7/8" x 6-1/2" Red

  • Usable length is measured between the shoulder and the cotter pin
PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Sold in a 100 pack
    • .......more details
Programming InstructionsInstructions de programmationSell sheetBrochure
ULT-MVP-2-D-TEK

EMX Industries Multi-Voltage Loop Detector 2-Channel (ULT-MVP-2U)

  • Combines small size with 9VDC to 240VAC input range.
  • Size: 73 x 38 x 78mm
  • ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
  • Ten (10) sensitivity adjustments
  • Four (4) frequency settings
  • Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence
    • .......more details
CABLE_532SS5000

Cable 5/32" 7x19 5000' Stainless Steel ** Price on request

OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

  • Power LED
LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details