Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

9150000626

3/32" Stops ONLY 100/pkg

  • Stops only 100 per pack
CB53205000-KOR

Cable 5/32" 7x19 5000' Galvanized Supreme ** Price on request

  • Galvanized cable 5/32" 7x19 5000ft spool.
  • Cable break strength: 2800 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
510.2996.06

Whiting Steel Roller Upgrade Option for 6 Panel DF Door

  • Upgrade option only - must accompany a door order
LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
MOTOR274

Manaras Electric Motor 3/4HP 575V 3PH

  • This item is compatible with BRAKE011
K1A6426-2

LiftMaster Control Board for RSL12V / RSW12V ** USE K001A6426-2

P220-3K

Heddolf 3-btn Transmitter 8-Dip Switch 318 MHz

  • Allstar compatible remote
COAX-RG6-ASBLY

Coax Cable Assembly Sold per Foot

  • Assembly includes union
255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

  • Yellow
  • Width: 5-7/8"
41A2780

LiftMaster Chain Pulley Bracket Kit

  • Also known as: 1B3214 1A2780 1C2762 41A2780 41B3214
  • Compatible with ATS 2595 3595 models
CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

34104

Doorlec V-belt Pulley 7" x 5/8" bore

MK00713

Micanan 10K OHM 1/4W Resistor

  • Replaces MK-00694
P220-2K

Heddolf 2-btn Transmitter 8-Dip Switch 318 MHz

  • Allstar compatible remote
25-01064

Truck Door Stainless Cables 97" 1/4" eye 7x7 Pair for Roll-Up Doors ** To extent of inventory

  • Works with both Whiting and Todco doors
  • Cable size: 1/8 "
  • Nylon eye ends are used on 1/4" & 7/16" eye cables which give superiour strength and corrosion resistance
UR2

3M Gel Connectors Red 26-19 AWG 100/Pkg ** To extent of inventory. Repl. by 703-004

  • Scotchlok Insulation Displacement Connector
  • RUS Listed Full featured
  • Max. Diameter Insulation: 0.082" (2.08 mm)
  • AWG Wire Range: 19-26 AWG Solid Wire
  • Angle: Straight
  • Operating Temp. : -40 to 285 degree F. (-40 to 140 degree C.)
  • .......more details
P220-1K

Heddolf 1-btn Transmitter 9-Dip Switch 318 MHz

  • 318MHz single button 9 trinary dipswitch remote control transmitter
  • Compatible with Allstar and Pulsar
  • Compatible with P294-K receiver
19054

Doorlec VBelt 5L380

  • works on model SWGO
CP-SP-DISCONNEC

Lynx Hoist Spring MCJH CP-SP-DISCONNECT

CP-LX600

Lynx Thru Beam Photocell N1 - Replaced by FR-1000 Fraba

  • Used on the UL325 operators
SPRING-DUPLEX

Special Order Duplex Spring Assembly

  • Customer made to required size
MI00001

Micanan Motor Pulley 5L 5/8" ID x 2" OD

SD751L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
  • .......more details
PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

  • For door thickness 2"
K76-34740

LiftMaster Limit Passpoint Kit

  • Kit Includes: Learn Limit Switch Learn Limit Nut Limit Shaft Assembly Sprocket and Wire Harness
  • For RSL12V RSL12VH
  • Aslo called Learn Limit Assembly Kit
G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

  • Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
  • 24VAC/VDC
  • 10' Long
E3JM-30FT

Omron Thru-Beam Photoelectric Sensor Nema 4 0-30ft Range

  • Easy-to-wire terminal block
  • Built-in timer offers selectable ON-delay OFF-delay and one-shot
  • Relay or transistor output models
  • Light-ON/Dark-ON operation switch selectable
  • Model: E3JM-10M4-US
225-120R

Electraray Rotating Warning Light Red 120V

  • Incandescent warning light
  • 90 flashes per minute
  • Operating temp. 31 to 150 degrees fahrenheit
  • Height: 7-1/4" Diameter: 5-1/2"
  • Enclosure rating: Nema4X
BL-BAG-12

Barlock Hardware Bag Only for Doors 13ft and Over

  • Does NOT include the locking bars
38066R

Genie Series II Intellicode Wall Console GBWC2-BX ** Disc. replaced by 39165R

  • Series II Multi-Function Wall Console (White Color)
  • Vacation Lock button disables remote access
  • Light Control Button
  • This item has been discontinued and replaced by #39165R
D22

Allen Bradley 110V Reversing Contactor

IRB-RET

EMX Industries Universal Retroreflective Photoeye Nema 4X New UL325-2016 *** To extent of Inventory

  • Type B1 non-contact sensor
  • UL 325-2016 compliant
  • Operating range up to 60 ft. (18.3 m)
  • NEMA 4X enclosure
  • Sensitivity adjustment: potentiomete
  • Mounting bracket and reflector provided
  • .......more details
9723-48

Whiting Pull Strap 48" with Steel Retainer

  • 48" long
V1104-BLACK

Replacement Vinyl Only for 1104-Black 200ft Roll

  • Sold in 200 ft rolls only
41A3589-1

LiftMaster 8ft Belt Assembly for Models '93-2000

  • For use with LiftMaster belt drive models 1270 1280 1280R.
  • Full belt assembly
  • For use with Chamberlain belt drive models 8100 8200 and 9200.
  • For standard 8 foot high garage doors
  • T rail assemblies ONLY.
110925

Allstar MVP-QC 3-Btn Quick Code Transmitter 318 MHz *** Discontinued

  • Compatible with all MVP receivers and operators
  • Quik-code programming no dip switches
  • Operate LED
  • Visor clip included
  • Power: Two 2032 batteries
  • Codes: 19683
  • .......more details
PP12X34.5

Base Plate 12" x 34 1/2"

  • 12"x34.5" Base Plate Stainless Steel
98EO626

Panic Bar for Pedestrian Door- Exit Only

  • Panic Bar for exit only
990TP626

Trim for Panic Bar 98EO626

  • Trim for Panic Bar - 98EO626
ME00035

Micanan Limit Shaft Light Duty 3/8-1/2 x 8-1/2"

G108019

LiftMaster Arm Clamp PVC

  • Used in connection with arm # G651209P
ME00001

Micanan Limit Shaft 3/8-1/2 x 9.75"

28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

  • Kit includes part # 28018A and # 28019A
  • Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
  • Includes 1 Belt Bullet and 2 Retainers
G651209P

LiftMaster 10ft PVC Arm Square Yellow/Black Stripes **DISCONTINUED

  • Requires clamp model # G108019 sold separately
  • For use on barrier gate operator BG770
1104-9FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Green (R)

  • Green rigid vinyl retainer with green flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
7812

Whiting Bottom Seal Truss Door White 90" Long

  • Fits Fed-Ex truck doors
VL-450-LED

Versa Light Dock Light Model 450 LED 42"

  • Easily Positioned
  • Durable Construction
  • Shock/Vibration Resistant
  • Fan Cooled
  • Circuit Breaker Switch
  • Grounded Plug
  • .......more details
Q013

LiftMaster Idler Pulley K75-50090

  • Toothless idler gear for use on SL 3000 operators
  • Includes bolt and sleeve.
  • Dimensions: 3.5" diameter 1-3/8 wide with 1/4 off set total width 1-5/8 with 1/2" x 2-7/8 bolt idlers sold individually
37302R

Genie C-Channel Belt Extension Kit for Silent Max and Quiet Lift models ** Price by Quote Only

  • The extension kit for C-channel belt drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door
  • For Genie silent max 1000 and quiet lift 1200 belt-drive garage door openers only
41A6298

LiftMaster Hardware Installation Bag for 3800

BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • Barrier equipped with control unit allowing operation perfectly adapted to every situation
  • Change of configuration or operation possible even after initial installation of the product
180210

Decorative Pull Handle Aspen-V3 Style 10-1/4" Stamped Steel Sold per piece

  • As seem on carriage house doors
180215

Decorative Hinge Apen-V3 Style 16" Stamped Steel Sold per piece

  • As seen on carriage house doors
M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

  • Upgrades added when purchasing a commercial operator
2376.206.35.930

Whiting Torsion assembly .206 wire size 35" spring length 93" shaft

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

AIRSWITCH017

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit

  • The small radio transmitter unit and the pneumatic switch are packaged within the DW3S case while the receiver is built into a Nema 4 case
  • It is equipped with a NCC or a NOC relay
  • Battery is included # CR2032
RESET008

Manaras Resettable Overload Fuse 11A 1 Phase

009145

Allstar Rear Idler Sprocket *** No Longer Available

  • Allstar Allister Rear Idler Sprocket new # 009145 replaces X145
  • for Allstar/Allister models including ARD-II A Access 200/250 Access 2000/2500 Access 3000/3500 PDQ and Allister Century Series 310/510/710
K1D6761-1CC

LiftMaster Logic Board AC

MGH-6115-ECB-RH

Manaras 1.5 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
FRONTIDLER010

Manaras Front Idler Assembly #41

R4257

Linear Power Supply

  • For SW100 and SL100 gate operators
FRONTIDLER007

Manaras Front Idler Assembly #48 (#410)

60-7241

Standard Caution Sign French 12" x 24"

GRC390/315-3

Heddolf Genie Compatible 390 or 315 MHz 3-btn Transmitter

  • 390 or 315 MHz rolling code compatible 3-Button 3-Channel remote transmitter
  • Works with Genie and Overhead Door openers that utilize a ROLLING CODE 315 or 390 MHz
  • Compatible with Genie model GIC-3 GIT90-3 GIT-3 GIT-3BL G2T-3 G2T-3BL GICT390-3BL ACSGT ACSCTG Type 1 ACSGT Type 1 TBSTG Type 1 Series II Electronics Compatible Remote and B8QACSC
108D36

LiftMaster Light Lens (K108D0036-2)

  • Compatible with one light operators
  • Compatible with the following Liftmaster models: 1040 1045 1055 100WD 200WD 1140 1145 1155 110WD 210WD3 1240 1245 1255 215WD 15WD 1240R 1245R 1255R 985 1046 1146 1246 1246R 1056 1156 1256 and 1256R
  • Compatible with the following Chamberlain models: 2000 2100 and 2200
  • Dimensions are 7-1/4" wide X 4-3/4" high X 3" deep
333857

Wayne Dalton T-Style Weather Seal Sold per Foot

  • Used on garage doors and mini storage doors
  • T = 7/16" wide – .438 Bulb is 7/8" x 7/8"
10-1000-CUSTOM

Strip Curtain PVC Door Custom Made ** Price by Quote Only

DM11VL-T/FORCE

Cable Drum Vertical Lift 11' D850-132 Pair Torque Force

  • 11' Vertical Lift aluminum die cast alloy.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
  • Rated Lift per Drum: 425 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1" solid shaft with 1/4" keyway.
  • .......more details
CHW401-T/FORCE

Chain Hoist Wall Mount 4:1 2000R Torque Force (126654)

  • 4:1 Reduced drive
  • Sprocket: 41B36 Bore: 1"
  • Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
  • Cross Reference: 2000R OMI 4006
MWC-32

Wheel Chock MWC-32 Rubber with Eye Hook

  • Good stability over others in this class
  • Long Lasting 80 Durometer rubber
  • Size: 6-1/2" wide x 9-1/2" long x 8-1/2" high
.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

  • 2-ply
  • Minimum tensile strength of 9800 lbs per inch of width
38072020

Tie Down Chain Assembly GR 70 5/16" x 20' Hook / Hook

  • Boron manganese steel heat treated chain
  • Hook on both ends
  • WLL LBS : 4700
39913625

Hitch Pin Forged Wire Handle 3/4" x 6-1/4" Red

  • Usable length is measured between the shoulder and the cotter pin
MT-2B

Linear 2-btn MegaCode Block Coded Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Operate LED
  • Visor clip included
  • Sold in lots of 10
  • Power: 9-volt battery
  • .......more details
PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Sold in a 100 pack
  • .......more details
108D79

LiftMaster Light Lens 108D0079M

  • Replaces 108D68 and 108D68-1
K10-30699-1

LiftMaster Chain Cover Mounting Bracket with Cover

CHAIN031

Manaras Jackshaft Drive Chain #50 5' with Link

MCJH-12-115-ECB

Lynx MCJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325 ** Replaced by CDJH

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
  • .......more details
SL332-ZP-COPPER

Zinc Plated Copper Sleeve 3/32" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST332COP. Stops are not zinc plated
CABLE_532SS5000

Cable 5/32" 7x19 5000' Stainless Steel ** Price on request

92-00005

Truck Door Hex Nut 5/16"-18

  • Cross ref: W #10.1033.2 for both #2376 & #7176 balancers
LEVER051

Manaras Brake Lever MGH C-1 Galvanized

SPRING026

Manaras Trolley Arm Disconnect Spring MGH

EP2978

Exhaust Port 3" long barrel

  • For use on insulated door panels up to 2" thick.
  • Inside diameter: 3" Includes fasteners & gaskets.
  • Outside diameter: 3-3/8"
  • Flange: 4-15/16"
  • Sleeve: 2"
  • Polished aluminum finish.
  • .......more details
JDMG-LG-A030

GDI Jackshaft 24VDC Nema 4

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
  • Includes cycle counter timer-to-close 10ft motor wire harness
  • Battery backup optional (sold separately)
D-2-6

Keyed Disconnect Device 6ft Cable

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
M-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • 4-1/2" depth
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.
  • .......more details
CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

  • Shaft Mounted Junior Hoist
  • 4:1 Reduced Drive
  • Sprocket: 41B36. Bore size: 1-1/4" diameter
  • Cross Reference: OMI 4020
  • Requires minimum 3/8" center line offset.
  • Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.
  • .......more details
CR-2

Battery CR2 3V Photo Lithium Battery

  • Camelion brand
SPR41B36X1.5

Sprocket 41B36 1.5" Bore 3/8"x3/16" keyway

27-24200

Truck Door Single Torsion Spring Assembly 96/60 for Todco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 96" Spring Length: 60" Wire Size: .243
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
  • Heavy-duty cast aluminum cable drums hold up to 130" of cable
  • .......more details
029-98105

T-Style Replacement Door White Stainless Steel Package 029-98105

  • Replacement door size between 72"- 98" wide x 100.25-105" high
  • Painted white
  • Stainless steel package
  • Includes Hinges Rollers and Cable