Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

  • With C16-32F bearing
  • Galvanized steel
  • 3-3/8" shaft offset
  • Flange allows plate to be bolted to the wall for additional support
  • Same as part number 209
K29-32410

LiftMaster Alarm Kit for SL575/585/595

  • Kit includes Alarm Spacer and Faston
Installation Manual
7FT-RAIL-SCREW

LiftMaster 7' screw drive rail 3077SD

  • One piece rail
GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

  • Activates one Delta-3 receiver for remote stop or reverse safety edge
  • No cables or coiled wires
  • Mounting screws (4) supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
CPS-3

LiftMaster Option Card with CPS-L Eyes

  • For applications requiring two sets of photoeyes ( CPS-III)
Installation Manual
MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

  • Activates one gate or device
  • Supplied with F-connector and whip antenna
  • Mounting bracket supplied
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No cables or coiled wires
    • .......more details
Programming Instructions
MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

  • MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
  • It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
  • Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
  • Features Include:
  • Internal antenna
  • 1-6 digit PIN for each user
    • .......more details
Installation Manual
K74-G0589

LiftMaster Hall Effect Sensor

  • For SL595 gate operator
K75-18364

LiftMaster Arm Assembly Kit for SW470

  • Complete arm kit for SW470 gate operator
15-50B40LGH

Sprocket 40 Teeth 1" Bore 1/4" Keyway

15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

15-50B18LGH

Sprocket 18 Teeth 1" Bore 1/4" Keyway

15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

  • Actual length: 179" (14' 11")
41A7619-4

LiftMaster Cover for 8557

10FT-TROLLEY-SET

LiftMaster 10' Track Set for Trolley Operator 10-5810-P (2 pcs) *Actual length 155"*

  • Actual Length 12' 11"
  • Includes 2 pieces of 10-5810-P
SHAFT034

Manaras Clutch (Input) Shaft for MJH

50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

  • 3- wire 18-gauge
  • Also called Reel Cord
PRO-TB-5011-R

Micanan 1/2HP 115V 1P Trolley Operator with Brake - Contactor

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
PRO-W_MOD

Micanan Nema 4/12 Modification

  • This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.
RS1029

Roller 2" Steel 9" stem- WL 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 9.5" Overall Length: 10.5"
  • Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)
821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

  • Enables smartphone control of most major brands of garage door opener with photoeyes.
  • Includes Wi-Fi hub and door sensor
Installation ManualManuel d'InstallationSell SheetBrochure
95LMC

LiftMaster Keyless Entry Transformer

  • 2-wire hook up
  • 110VAC Input 22 VDC 2-Wire Connection
41A7635

LiftMaster Transformer 100V

  • For model: 8550
RESET003

Manaras Resettable Overload Fuse 6A 1 Phase

MU00001

Micanan Swivel Pulley

  • For models PRO-H / HB
1A3982

LiftMaster Operator Splash-Proof Cover

  • For models: MH H HCT GH
  • For wall mounted operators 31" L x 19" W x 18" D assembly required.
Installation manual
85LMC

LiftMaster Plug-In Power Supply

  • Plug-in jack for easy installation on Liftmaster receivers
  • Power input level: 105-135AC 24AC output
ME00003

Micanan Clutch Shaft Only for Pro-T/TB 3/4" x 11-3/4" No Kw 1" Thread

ME00057

Micanan Clutch Shaft Only for PRO-APT 3/4" x 12-3/4"

  • For model PRO-APT
41C0279

LiftMaster Light Socket for Sec+ 2.0

  • New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
  • Compatible with LiftMaster garage door openers manufactured from 1993 to present.
  • New "insulated" design eliminates interference from CFL bulbs therefore better remote control range
ME00057-COMPLET

Micanan Clutch Shaft Complete for PRO-APT (SCLUTCHSHAFT) MX00213

  • For model PRO-APT
MI00007

Micanan Front Idler Assembly for PRO-APT/T

  • For model PRO-APT / T
  • 3/4" x 5.79" LG
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
EXTANT

LiftMaster Coax Antenna Connection Kit JF

  • For use on Medium-Duty commercial operators only
Installation manualManuel d'installation
SHAFT023

Manaras Intermediate Shaft for MJ operator

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts
CABLE_316SS-500

Cable 3/16" 7x19 500' Stainless Steel

Comparison charts
27-20004

Truck Door Dual-Spring Shaft 93" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
82-PX10-28

LiftMaster Screw 10-32x28

975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

  • Works with Chamberlain (LiftMaster) Garage Door Openers
  • Easily connects with two wires to the photocell terminals of the opener
  • The Laser light turns on as you drive into the garage
  • Simply Adjust the light to a specific spot on the dash
Installation ManualManuel d'Installation
GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
TUBE_SHAFT_9FT

Hollow Shaft 1" x 9'-10" Galvanized 16 gauge

TUBE_SHAFT_8FT

Hollow Shaft 1" x 8'-10" Galvanized 16 gauge

888LM

LiftMaster MyQ Control Panel with TTC Sec+ 2.0 *No Longer Available*

  • Works with ANY Liftmaster Sears Chamberlain Access Master Master Mechanic Formula I True Value True Guard and Raynor Garage Door Opener Manufactured after 1998 using a amber / orange yellow or purple learn button.
  • Replaces existing control panel
  • Simple programming of new MyQ accessories and Security+ 2.0 remote controls and keyless entry products
  • Motion-activated opener light control
  • Adjustable light timer option
  • Lock feature
    • .......more details
Installation ManualManuel d'InstallationSell Sheet
883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

  • Controls garage door operation and opener lights
  • Easy and fast programming
  • Compatible with Security+ 2.0 and MyQ remotes and accessories
Installation ManualManuel d'Installation
882LMW

LiftMaster Multi-Function Control Panel Wi-Fi

  • Push button for garage door operation
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • Lock feature designed to prevent operation of the door from portable remote controls
  • Compatible only with LiftMaster® Security+2.0™ and Wi-Fi garage door openers
  • Equivalent to Chamberlain's 41A7185
    • .......more details
Programming instructionsInstructions de programmation
QUICK_CLOSE

Commercial Quick Close Device / Universal Timer V7

  • This device will automatically close the door as soon as the vehicle passes through the safety beams.
Wiring InstructionsMonitored connectionNon-monitored connection
BEARING005

Manaras Flange Bearing ID 5/8"

  • Flange bearing for 5/8" shaft
.234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.218-258-R

Cut-to-Length Torsion Spring .218 x 2-5/8" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
C-200-INSTALLED

Cones 2" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF200
.207-258-R

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.295-2-L

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.234-2-R

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.234-2-L

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

  • Swivel end
  • Nema 1
  • Same as Pull Cord
PS31L-NS11R1M00

Carlo Gavazzi Utility Switch

  • Switch DPST-NO/NC Chassis Mount
  • Actuator Type: Side Rotary Adjustable Roller
  • Termination Style: Screw Terminal
  • Ingress Protection: IP66 - Dust Tight Water Resistant
  • Switch Function: On-Mom Off-Mom
  • Current Rating (Amps): 5.5A (AC) 2.8A (DC)
    • .......more details
Installation Manual
.283-134-L

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF175
.283-134-R

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.273-134-R

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-L

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.262-134-R

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.243-134-R

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.243-134-L

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-R

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-L

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.218-134-L

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.207-134-R

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
CABLE_1/8-SS

Cable 1/8" 7x19 1000' Stainless Steel ** Price on request

MOUNTSHAFT018

Manaras Limit Shaft Kit Opera

Drawing
MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

  • Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011
86LMC

LiftMaster Antenna Extension Kit

  • For use with 312HMC 412HMC 422LMC and 423LMC
  • Kit contains 15ft of cable
107999.0001.S

Genie Motor Pulley for Overhead JST

C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF258
.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
CB14B0500

Cable 1/4" 7x19 500' Galvanized

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
NX21

Allen Bradley 24V Reversing Contactor

  • Allen Bradley no. 104-C16KJH22-X6
  • Cat no. 100-C16*10
PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

  • Suitable for exterior applications NEMA 4
  • Multi-supply voltage 12-240VDC 24-240VAC
  • LED indication for power supply and target detected
  • Not recommended for carwash applications
  • Operating temperature -25 to +55 C
  • Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3
    • .......more details
Installation Manual
PMP12RI

Carlo Gavazzi Polarized Retro-Reflective Sensor

  • Range: 40 feet (12m)
  • Modulated invisible light polarized
  • LED- indication for target detected
  • NO and NC output
  • Suitable for exterior applications and harsh environments
  • Multi supply voltage: 12 to 240VDC and 24 to 240VAC 50/60Hz
    • .......more details
Installation Manual